Ultra articulated Dragon - Big 270mm

Based on my famous ultra articulated snake, i proudly present the ultra articulated Dragon!

There are four sizes of the dragon available, the huge, the big, the small one and the baby.

Here you can get the BIG one.

There versions have roughly the straight length:
Mini→ Length 90mm
Small→ Length 180 mm
Big→ Length 270mm
Huge→ Length 430mm

The tail connection has in all my designs the same size that it works with the part distance for printing. Do not scale it down, but you can upscale it. You may have to rotate the connection a bit, if your printer is not well calibrated and the single parts are printed together with e.g. strining.

The connection is not that standard connection like in most of the available flexible prints.
The model has a slanted hole at the bottom side of the head, if you want to place it on a nail at a wall. The hole has at my different models not everywhere the same size, it is depending on the head size. This can also be used to place it on a wall with nails as display of your products, if you want to sell physical prints and you obtain a commercial license. How the hole looks like is shown here https://cults3d.com/:3010214

If you like the model or the idea, I would be happy if you like it or download it. Stay tuned for my other models.

Would be happy to see your makes!

All my Crazy3D designs are copyrighted. After purchase here, the sale of digital files or printed models of my designs is NOT PERMITTED without my express written consent.

INFO FOR COMMERCIAL USE
If you want to sell legally printed models(digital files are never for selling or sharing), with this link you can obtain the permission:
…join my printables club as SUPPORTER to get also exclusive models → https://www.printables.com/@Crazy3D#join.@Crazy3D.1403

…join my printables club as CRAZY BUSINESS LIMITED to get a license for limited selling physical prints → https://www.printables.com/@Crazy3D#join.@Crazy3D.1409

…join my printables club as CRAZY BUSINESS UNLIMITED to get a license for selling physical prints → https://www.printables.com/@Crazy3D#join.@Crazy3D.1410

If you like my designs and my work for the community, you can also make me happy if you buy me a coffee here(only donation, no rights for selling anything): https://buymeacoffee.com/crazy3d

The design is made for support free printing!
I recommend to use three bottom an top layers and at least 2 walls with 10% infill (i used gyroid or lightning infill).

I only printed it in PLA, but other filaments may also work.

If you missuse it or your print settings will give you a bad result, small parts can be loosen.
Warning:Not suitable for children under three years due to small parts, choking hazard

Bei falscher Handhabung oder wenn Ihre Druckeinstellungen zu einem schlechten Ergebnis führen, können sich Kleinteile lösen.
Achtung:Nicht für Kinder unter drei Jahren geeignet wegen verschluckbarer Kleinteile, Erstickungsgefahr.