Skip to content

Turnip Head!

3D model description

Turnip Head, from the wonderful movie Howl's Moving Castle. If you have not seen it, I highly recommend you do so. The model is an easy enough print with no supports needed.

I've set it up for two print beds. One measures 170.03 x 88.04 x 93.16. The second measures 79.95 x 91.48 x 98.05.

I've also included the full model and the parts.

The model measure around 30 cm tall when assembled. Reduce at your own risk:P

3D printing settings

Printer:
Prusa i3 mk2

Rafts:
No

Supports:
No

Resolution:
.15

Infill:
20%

Arms and pipe
I used a bit of heat to soften the arm joint before gluing them together.

I've taken his pipe and put it inside of his hat. It should just snap off. I had no problem printing it but it is really, really small. I've included a small hole in Turnip Heads left side mouth for placement.

The only areas that required a bit of sanding was his chin and the bow-tie.

  • 3D model format: STL

Creator

Followers Following 0
Downloaded 9565

You can now follow me on twitter to see what projects I'm working on.

twitter.com/Cmag_net

I'm a 3D design/printing hobbyist. Don't worry, I still have my day job. My work is primarily fan art, but from time to time, I'll put out something original. There is much to learn.

License

CC BY NC

Similar 3D files

Best sellers of the category Art


Add a comment