601 comments

Hi ! I printed it with PLA because that’s the filament with the least shrinkage or warping, meaning it’s perfect for prototyping and getting accurate fitment. It was some basic filament from Amazon, with just a layer of MTN94 black paint and matte varnish. I printed all the large parts vertically, it’s the best way to reduce the use of supports.

Hello ! I’ll work on it asap. Concerning the SVD, I had a spring A&K SVD, I made back then a stock tube and AR grip adapter, and an AR handguard adapter. It was functional but if I remember correctly the fitment could have been better. I never released it.

Hello ! If you are still interested, I added a VSSM stock for the LCT VSS to my collection ;)

Wow. Thank you my man!

And about SVD. I have a spring A&K SVDS and wanted to customize it to look more modern, but the project halted, because of some internal problems. I wanted to add to it a stock adapter for AR tube you can find in Tarkov (Lynx Arms Hinge adapter) and I still tries to figure out how to mount cyma Mlok handguard more reliably. I don't want to drill holes in the outer barrel to fit it as it was designed by cyma, so for now it stays on the word of honour and screws screwed as much as possible to hold it still xD

Of course I know it wouldn't be so easy without access to the replica and handguard

Hello, you can check the project pictures for the hardware informations

Hello, actually this version is made for an actual mag. It uses a friction fit system, adjustable with the screw at the back of the secondary magwell. I can send you the step if you want to adapt it though, just send me a mail at Boschert.lucas@gmail.com

plizzzzzz

You screw it at the back of the bolt. There is a hole for an M5 screw which is used to screw the bolt and the extension together.

I don`t want to be a pain but can you show me on an image please ?

Oh you mean the bolt from the AAP not the uck_bolt_carrier_aap01

Look at the 9th image (the one with the AAP outside of the kit), you can see the cocking extension of the back of the bolt ;)

Allmost done :D

Hello ! You actually need to transfer your retention button from your VSR-10 stock to the new printed one. You can also print a totally new one. While not included, you can easily find free files for it, like here :

https://www.thingiverse.com/thing:3061498

Hello ! Yes your 1911 should fit in the UCK, but only if it has the frame rail, since it’s attached here. You should be able to use the Hi-Capa bolt carrier too.

As for the Hi-Capa carbine kit, I’m not sure about compatibility. If it’s a Marui standard 1911, it should be okay. But I’m not sure about the mechanical compatibility of the Elite Force branded 1911, I’d recommend considering it not compatible just to avoid having trouble fitting the kit.

You can alter the kit as much as you want if it’s for personal use. Copyrights only apply when sharing and selling products ;)

The ACR stock has a picatinny version included. Technically, it should fit both of my kits thanks to the 1913 interface :)

Hello ! Judging by the pictures of the Cults project (which are generated with the included files) and the previous makers that printed it, it should be in the package. Can you please look again ?

Hello ! It’s a matte black PLA, as simple as that :)

Ok ! I thought it was a mat petg

On some of my prints I used PETG, but sprayed a bit of transparent matte varnish on it (the KC02-VSS is an example of this if you want to check)

Hello ! It’s done, have a nice day