ItsLitho Traditional Lithophane Photophore

Here is a traditional lithophane photophore made using ItsLitho (https://itslitho.com).

Just download the files, you can print the lithophane which is included in the pack or you make your own lithophane using other picture (Just use a 1/3.8 picture ratio, 1 height for 3.8 length).

To proceed, please use this ItsLitho profile: https://tool.itslitho.com/profile/93d3f634

This photophore is lit by a led candle diameter 40mm max or multicolor puck led or both.

Candle: https://itslitho.com/product/candle-led-lights/

Multicolor Puck: https://itslitho.com/product/multicolor-puck-led-light-4-pack/

You can install lighting in the plate only (to light the lithophane) or also add a light in the stand.

You can decide to use or not the stand. If yes, just clip it on the plate.

/!\ For private use only. No sale allowed, neither printed models nor files /!\

For the Plate and the Stand, please print them flat on the building plate (accordingly to the picture you'll find one description). No support needed.

Lithophane information:

Thickness: Minimum 0.8/ Maximum 3.2

Layer height: 0.12mm

Infill: 999 shells

Printing-Speed: 100mm/sec

Filament: Tinmory Matt pla

*Note that the parameter can be different depending on what printer you use.