Skip to content
Advertising

1/6 the bullet custom triumph

F.png 1/6 the bullet custom triumph
G.png 1/6 the bullet custom triumph
H.png 1/6 the bullet custom triumph
speedo.png 1/6 the bullet custom triumph
25.png 1/6 the bullet custom triumph
E1.png 1/6 the bullet custom triumph
I.png 1/6 the bullet custom triumph
Instruction-Screen-Grab.jpg 1/6 the bullet custom triumph
Primary Assem Example .stl 1/6 the bullet custom triumph
F.png 1/6 the bullet custom triumph
G.png 1/6 the bullet custom triumph
H.png 1/6 the bullet custom triumph
speedo.png 1/6 the bullet custom triumph
25.png 1/6 the bullet custom triumph
E1.png 1/6 the bullet custom triumph
I.png 1/6 the bullet custom triumph
Instruction-Screen-Grab.jpg 1/6 the bullet custom triumph
Primary Assem Example .stl 1/6 the bullet custom triumph
Advertising
Share
Add to
Make
?
Creation quality: 5/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
License
Usages
3D design format
15 files (PDF, STL, and ZIP) Close
  • CARBURETTOR.zip
    • LH Carburettor Main Body.stl
    • LH Fuel Bowl Banjo Fitting.stl
    • LH Fuel Bowl.stl
    • LH Intake Adaptor.stl
    • LH Throttle Cable Adjuster Plate.stl
    • RH Carburettor Main Body.stl
    • RH Fuel Bowl Banjo Fitting.stl
    • RH Fuel Bowl.stl
    • RH Intake Adaptor.stl
    • RH Throttle Cable Adjuster Plate.stl
  • ENGINE STAGE 1.zip
    • Coil.stl
    • Engine Block.stl
    • Engine Mount Bolt 1.stl
    • Engine Mount Bolt 2.stl
    • Engine Mount Bolt 3.stl
    • Engine Mount Bolt 4.stl
    • Engine Mount Nut 1.stl
    • Engine Mount Nut 2.stl
    • Engine Mount Nut 3.stl
    • Engine Mount Nut 4.stl
    • Engine Mount Nut 5.stl
    • Engine Mount Nut 6.stl
    • Front Engine Mount.stl
    • Generator Cover.stl
    • Generator.stl
    • Magneto Cover.stl
    • Magneto.stl
    • Rear Engine Mount.stl
    • Timing Cover.stl
    • Triumph Badge.stl
  • ENGINE STAGE 2.zip
    • Cylinder Head Bolt 1.stl
    • Cylinder Head Bolt 2.stl
    • Cylinder Head Bolt 3.stl
    • Cylinder Head Bolt 4.stl
    • Cylinder Head Bolt 5.stl
    • Cylinder Head Bolt 6.stl
    • Cylinder Head Bolt 7.stl
    • Cylinder Head Bolt 8.stl
    • Cylinder Head.stl
    • Cylinder Jug Studs 1.stl
    • Cylinder Jug Studs 2.stl
    • Cylinder Jug Studs 3.stl
    • Cylinder Jug Studs 4.stl
    • Cylinder Jug Studs 5.stl
    • Cylinder Jug Studs 6.stl
    • Cylinder Jug Studs 7.stl
    • Cylinder Jug Studs 8.stl
    • Cylinder Jug.stl
    • Front Push Rod Tube.stl
    • Front Rocker Cover.stl
    • Rear Push Rod Tube.stl
    • Rear Rocker Cover.stl
    • Valve Adjuster Cover 1.stl
    • Valve Adjuster Cover 2.stl
    • Valve Adjuster Cover 3.stl
    • Valve Adjuster Cover 4.stl
  • FINAL ASSEMBLY.zip
    • Carburettor Venturis 1.stl
    • Carburettor Venturis 2.stl
    • Fuel Cap.stl
    • Fuel Tank Bolt.stl
    • Fuel Tank Nut.stl
    • Fuel Tank.stl
    • Head Light Bracket.stl
    • Headlight Bezel.stl
    • Headlight Bucket.stl
    • Headlight Lens.stl
    • Headlight Lock Bolt.stl
    • Kick Stand Bolt.stl
    • Kick Stand.stl
    • LH Fuel Petcock.stl
    • Oil Tank Cap.stl
    • RH Fuel Petcock.stl
    • Seat Bracket.stl
    • Seat.stl
  • FORWARD CONTROL ASSEMBLIES.zip
    • Dampener Adjuster.stl
    • Front Drum Lever.stl
    • Front Shock Dampener.stl
    • Hand Grip 1.stl
    • Hand Grip 2.stl
    • LH Bar Lever Anchor.stl
    • LH Brake Lever.stl
    • LH Handlebar.stl
    • RH Bar Lever Anchor.stl
    • RH Brake Lever.stl
    • RH Handlebar.stl
    • Smith Speedo.stl
    • Speedo Bezel.stl
  • FRAME STAGE 1.zip
    • Engine Mount Bolt 1.stl
    • Engine Mount Bolt 2.stl
    • Engine Mount Bolt 3.stl
    • Engine Mount Nut 1.stl
    • Engine Mount Nut 2.stl
    • Engine Mount Nut 3.stl
    • Main Frame.stl
    • Rear Frame.stl
  • FRAME STAGE 2_PRIMARY DRVE_EXHAUST.zip
    • Clutch Pack.stl
    • Clutch Pressure Plate.stl
    • Crank Bolt.stl
    • Exhaust Rear Mount Bolt.stl
    • Exhaust System.stl
    • Frame Bolt 1.stl
    • Frame Bolt 2.stl
    • Ignition Barrel.stl
    • LH Exhaust Clamp.stl
    • Primary Chain.stl
    • Primary Cover.stl
    • Primary Drive Rear Cover.stl
    • Primary Drive Sprocket Nut.stl
    • RH Exhaust Clamp.stl
    • Seat Spring.stl
  • FRONT END ASSEMBLY.zip
    • Drum Anchore Screw.stl
    • Front Axle Bolt.stl
    • Front Axle Nut.stl
    • Front Drum Anchor.stl
    • Front Drum.stl
    • Front Rim.stl
    • Front Spring.stl
    • Front Tyre.stl
    • Gauge Holder.stl
    • LH Fork.stl
    • LH Lower Spring Bone.stl
    • LH Upper Spring Bone.stl
    • Lower Head Stock.stl
    • RH Fork.stl
    • RH Lower Spring Bone.stl
    • RH Upper Spring Bone.stl
    • Spring Base Bolt.stl
    • Spring Base.stl
    • Upper Head Stock.stl
  • Lace style wheels.zip
    • Front Rim Jig.stl
    • Front Rim Hoop.stl
    • Front Rim Hub.stl
    • Rear Rim Jig.stl
    • Rear Rim Hoop.stl
    • Rear Rim Hub.stl
  • OIL TANK ASSEMBLY.zip
    • Front Tool Bag Bolt.stl
    • Leather Tool Bag.stl
    • Oil Feed Line.stl
    • Oil Pump Feed Fitting.stl
    • Oil Pump Manifold.stl
    • Oil Tank A.stl
    • Oil Tank B.stl
    • Oil Tank Drain Bolt.stl
    • Oil Tank Rear Bolt.stl
    • Spark Plug Boot 1.stl
    • Spark Plug Boot 2.stl
    • Sprack Plug 1.stl
    • Sprack Plug 2.stl
    • Transmission Outer Cover.stl
  • Primary Assem Example .stl
  • REAR CONTROL ASSEMBLIES.zip
    • Clutch Trow Lever.stl
    • Foot Gear Selector.stl
    • Gear Lever.stl
    • Gear Selector Push Rod.stl
    • Kick Start Lever A.stl
    • Kick Start Lever B.stl
    • LH Foot Peg Anchor.stl
    • LH Foot Peg.stl
    • Rear Brake Foot Control.stl
    • Rear Drum Lever.stl
    • Rear Drum Push Rod.stl
    • RH Foot Peg Anchor.stl
    • RH Foot Peg.stl
    • Transmission Filler Cap.stl
  • REAR END ASSEMBLY.zip
    • Drive Chain.stl
    • Rear Axle Bolt.stl
    • Rear Axle Nut.stl
    • Rear Drum Backing.stl
    • Rear Guard.stl
    • Rear Outer Drum.stl
    • Rear Rim.stl
    • Rear Tyre.stl
  • TRANSMISSION.zip
    • Transmission Case.stl
    • Transmission Lower Mount Bolt.stl
    • Transmission Lower Mount Nut.stl
    • transmission Outer Case.stl
    • Transmission Upper Mount Bolt 1.stl
    • Transmission Upper Mount Bolt 2.stl
    • Transmission Upper Mount Bolt 3.stl
    • Transmission Upper Mount Nut 1.stl
    • Transmission Upper Mount Nut 2.stl
    • Transmission Upper Mount Nut 3.stl
    • Transmisson Upper Mount.stl
  • Triumph Instructions.pdf

Learn more about the formats
Last update
Publication date
Design number 2302616
Design author Altered3D
Altered3D

Altered3D

Certified account
Issue with this design? Report a problem.

3D printer file info

3D model description

1/6th Scale high detail kit consisting of 176 parts, please read instructions before assembly,
all parts are key and dowl fit some parts may require further fit and finish as bike was drawn in 1:1 scale, please contact us if info required or issues,
Please follow assembly notes provided as some parts install in sequence,

By purchasing this file, you agree to adhere to Cults3d third party licence,
You can print these files for your personal use,
You may not sell, give away or rent the digital files of the 3D model,
You may not modify or adapt the digital file of the 3D model for redistribution,
You may not sell 3D prints of the design or derived from the design for economical or financial gain.

Please contact designer for commercial licences.

Categories

All categories โ€บ Various

Meta tags

Tags

Advertising

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi Donate
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the siteโ€™s revenues are paid back to the platformโ€™s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.