608ZZ Bearing Hanging Filament Spool Mount v2.0

Updated Designed: Instead of using a 3D printed arm for the spool, I decided to create a holder with a 6 inch bolt.

Alternative Design: https://www.thingiverse.com/thing:3029317

I designed this hanging spool mount to go under my workbench with my printers. I had lots of bearing leftover from the fidget spinner craze and decided to put them to use. Filament comes off the roll nice and smooth.

Required Components:
1 x 5/16 in.-18 tpi Zinc-Plated Hex Nut (25-Piece per Bag) - (Homedepot) - (https://is.gd/33W8Yd)
1 x 5/16 in. Zinc Nylon Lock Nut (15 per Pack) - (Homedepot) - (https://is.gd/e1HuBL)
1 x 5/16 in. -18 tpi x 6 in. Zinc-Plated Hex Bolt - (Homedepot) - (https://is.gd/gfU2Uu)
2 x 608ZZ Bearings
https://amzn.to/31AvjbX

Printed Components Needed:
1 x HangingSpoolHolder_Bearing_Roller_v2_x1.stl
1 x HangingSpoolHolder_Base_v2.stl
1 x HangingSpoolHolder_45mm_End_Cap_v2.stl
1 x HangingSpoolHolder_40mm_End_Cap_v2.stl (optional)

Supports are needed for the HangingSpoolHolder_Bearing_Roller (Build plate only) . All STLs are print-ready oriented.