A lamp I designed to provide a little illumination to Vectors charging station( not good at finding it in the dark). It is hollow and allows for a small switch on the stem as well as a hole for the usb cable. simply circuit by putting a couple of led's on a perf board with their resistors and wire in a switch to a old usb cable. Set it up with a 5v but you can do what you will it's a nice shell for any where a small little lamp is needed. Split the design and print the base separate from the lens/diffuser. just use hot glue to hold perf board in the top, voila. Lens is just snug fit in place for ease of removal if necessary. you may need to scrape the inside edge just a little to get it to slip in just till it is in about 2mm
yes supports, split design into sub mesh and print lens separately in clear or translucent. Brim if you need to, some need, some don't, printers choice
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!