Skip to content
Advertising

BD1 Droid - highly detailed version [WIP]

Advertising
Share
Add to
Make
?
Creation quality: 4.4/5 (16 votes)
Evaluation of members on the printability, utility, level of detail, etc.
License
Usages
3D design format
24 files (STL and ZIP) Close
  • body - SOLID.stl 95.0 Γ— 142.23619100000002 Γ— 116.710769 mm
  • body - hollow.stl 95.0 Γ— 137.53619 Γ— 116.710769 mm
  • everything.zip
    • heel front left detail - solid.3mf
    • heel front central detail - solid.3mf
    • heel front right detail - solid.3mf
    • heel most back part - solid.3mf
    • heel front part - solid.3mf
    • heel middle axil tube - solid.3mf
    • heel middle part - solid.3mf
    • toe back part - solid.3mf
    • toe top part - solid.3mf
    • toe axil tube - solid.3mf
    • toe front part- solid.3mf
    • heel back part - solid.3mf
    • right leg to body interface - solid.3mf
    • lower right leg - solid.3mf
    • upper left leg - front cover screw cap.3mf
    • upper left leg - front cover.3mf
    • upper left leg - inside cover.3mf
    • upper left leg - solid.3mf
    • neck - main part - top.3mf
    • neck - main part - bottom.3mf
    • neck - main part - original (solid).3mf
    • neck - top joint.3mf
    • neck - top joint - original part.3mf
    • Memory Card.3mf
    • body - hollow.3mf
    • body - front details plate.3mf
    • body - back details plate.3mf
    • body - back cartridge.3mf
    • body - SOLID.3mf
    • neck - top accembly nut holder.3mf
    • neck - top accembly top slider.3mf
    • head - back screen plug.3mf
    • head - back main.3mf
    • head - left ear.3mf
    • head - back detail.3mf
    • Right eye lense.3mf
    • Right eye main frame.3mf
    • Left Eye body.3mf
    • Left eye lense.3mf
    • head - middle body.3mf
    • head - bottom.3mf
    • head - front.3mf
    • head - left side compartment cap.3mf
    • head - ash tray.3mf
    • head - ash trey insert - half-wrong.3mf
    • head - top compartment cap.3mf
    • head - main body - SOLID.3mf
    • head - main body with compartment- SOLID.3mf
    • body smart card.3mf
    • leg lower - ouside - FDM.3mf
    • leg lower - pipe 1 - supported.stl
    • leg lower - pipe 1.lys
    • leg lower - pipe 3.3mf
    • leg lower - pipe 2.3mf
    • leg lower - pipe 1.3mf
    • leg lower - foot cover.lys
    • leg lower - foot cover.3mf
    • leg lower - inside cover - full + tow handle middle.lys
    • leg lower - inside cover - full.lys
    • leg lower - inside cover - supported.stl
    • leg lower - inside cover.lys
    • leg lower - inside cover.3mf
    • leg lower - inside bottom - supported.stl
    • leg lower - inside bottom.lys
    • leg lower - inside bottom.3mf
    • leg lower - inside top - supported.stl
    • leg lower - inside top.lys
    • leg lower - inside top.3mf
    • leg lower - ouside bottom.lys
    • leg lower - ouside.3mf
    • foot - all parts.lys
    • leg lower - ouside bottom - supported.stl
    • leg lower - ouside top.ctb
    • leg lower - ouside bottom.3mf
    • leg lower - ouside top.3mf
    • leg lower - inside.3mf
    • heel - body main - supported.stl
    • heel - back main.lys
    • heel - main hindge - supported.stl
    • heel - power rod - supported.stl
    • heel - power rod.lys
    • heel - power rod.3mf
    • heel - back body.3mf
    • heel - main hindge part.3mf
    • Toe Front - Top - supported.stl
    • Toe Front - Top.lys
    • Toe Front - Bottom - supported.stl
    • Toe Front - Bottom.lys
    • Tow handle - Top Part - supported.stl
    • Tow handle - Top Part.lys
    • Tow handle - Back part - supported.stl
    • Tow handle - Back part.lys
    • Tow handle - Main joint cylinder - supporter.stl
    • Tow handle - Main joint cylinder.lys
    • Heel - back part.lys
    • Heel - back body - supported.stl
    • Tow handle - Main joint cylinder.3mf
    • Tow handle - Back part.3mf
    • Tow handle - Top Part.3mf
    • Toe Front - Bottom.3mf
    • Toe Front - Top.3mf
    • heel - main part.3mf
    • heel - back part.3mf
  • head - back main.stl 187.09906 Γ— 118.449656 Γ— 90.845306 mm
  • head - left ear - plug.stl 8.5 Γ— 17.404854000000007 Γ— 10.815308000000016 mm
  • head - left ear.stl 28.728690999999998 Γ— 159.415253 Γ— 159.40683 mm
  • head - main body - SOLID.stl 216.411514 Γ— 262.705368 Γ— 97.65228200000001 mm
  • left leg to body interface.stl 31.10799 Γ— 60.830344999999994 Γ— 60.83036799999999 mm
  • left leg to body interface.stl 31.10799 Γ— 60.830344999999994 Γ— 60.83036799999999 mm
  • solid 3mf parts.zip
    • toe top part - solid.3mf
    • neck - main part - original (solid).3mf
    • right leg to body interface - solid.3mf
    • heel middle part - solid.3mf
    • head - main body - SOLID.3mf
    • toe back part - solid.3mf
    • body - SOLID.3mf
    • heel front central detail - solid.3mf
    • heel back part - solid.3mf
    • heel front left detail - solid.3mf
    • heel most back part - solid.3mf
    • lower right leg - solid.3mf
    • heel front part - solid.3mf
    • neck - top joint - original part.3mf
    • toe front part- solid.3mf
    • toe axil tube - solid.3mf
    • heel middle axil tube - solid.3mf
    • upper left leg - solid.3mf
    • head - main body with compartment- SOLID.3mf
    • heel front right detail - solid.3mf
  • upper left leg - front cover - FDM.stl 25.990409999999997 Γ— 156.07095700000002 Γ— 157.62928799999997 mm
  • upper left leg - front cover - FDM.stl 25.990409999999997 Γ— 156.07095700000002 Γ— 157.62928799999997 mm
  • upper left leg - front cover - bigger side detail.stl 5.9522249999999985 Γ— 37.090788 Γ— 37.661484 mm
  • upper left leg - front cover - center detail.stl 15.58547999999999 Γ— 60.84532 Γ— 61.668379999999985 mm
  • upper left leg - front cover - full.stl 25.990409999999997 Γ— 156.07095700000002 Γ— 157.62928799999997 mm
  • upper left leg - front cover - knee round detail.stl 5.577712999999989 Γ— 27.907020000000003 Γ— 27.907027999999997 mm
  • upper left leg - front cover - smaller side detail 1.stl 3.2717440000000124 Γ— 13.194436 Γ— 13.260558999999972 mm
  • upper left leg - front cover - smaller side detail 2.stl 3.2717440000000124 Γ— 13.178349999999998 Γ— 13.275818000000015 mm
  • upper left leg - inside cover - FDM.stl 18.592006999999995 Γ— 155.966968 Γ— 157.53042599999998 mm
  • upper left leg - inside cover - FDM.stl 18.592006999999995 Γ— 155.966968 Γ— 157.53042599999998 mm
  • upper left leg - inside cover - bigger detail.stl 4.5 Γ— 33.291704 Γ— 33.637528 mm
  • upper left leg - inside cover - bigger round detail.stl 2.5 Γ— 7.871765 Γ— 7.871521000000001 mm
  • upper left leg - inside cover - full.stl 18.592006999999995 Γ— 155.966968 Γ— 157.53042599999998 mm
  • upper left leg - inside cover - smaller round detail.stl 2.5 Γ— 6.082507999999997 Γ— 6.08248900000001 mm

Learn more about the formats
Last update
Publication date
Design number 679216
Design author soswow
soswow

soswow

Certified account
Issue with this design? Report a problem.

3D printer file info

3D model description

Hello, I've modelled a highly detailed version of BD1 based on high-res model, renders of which were shared by the game hard surface modeller.

I am sharing it for free. Modelling took a lot of time, so if you feel the urge to tip me for a coffee, feel free to do it here https://paypal.me/amotsjonov?country.x=AU&locale.x=en_AU

Please, do not make money of this work! If you really want to, please reach out, I am sure we will find an agreement.

I am sharing STLs of one of the cuts I've made. I am happy to share STEP files on a case by case basis. Please reach out to me at soswow@gmail.com if you want easier life modifying those to suit your needs.

I will have [WIP] in the title until I've test-printed and build my own physical version. But I am sharing STL files I have right away so you have an early access. Expect things to be re-uploaded.

Some parts I will be printing on FDM and some on SLA printers. For SLA parts I am posting supported files (as many as I've supported and printed so far)

At the time of me writing this instruction there is no instructions on how to accemble or any diagram of what goes where. This should come at some point.

everything.zip contains all the files I've exported so far, including .lys files for resin parts I've pre-supported, -supported.stl files for exported stl files of these .lys supported parts.

You can download content of this project once and I believe you will be notified when I update something/upload more things etc.

UPD:
2 Apr #1: Added left leg to body interface.stl - which was missed from everything.zip

2 Apr #2: Added bunch of files into the root. All start with upper left leg. They are version for FDM printing of big low detailed parts and all the detailed extracted to be printed on STL (see two new screenshots)

3 Apr #1: Did some work around head and ear interface. Modified ear a bit, extracted the "cap" part so year cam be bolted to the head part.

Categories

All categories β€Ί Game β€Ί Action Figures

Tags

Advertising

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi Donate
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.