3RONCO - Full 3D printed RC car Kit

Thank you much!!
Definitely, I'll do it! Stay tuned and thanks for supporting me 😄

Thanks for the question! In the build guide is mentioned the scale, it is 1/8 scale 😄

Hello! Not yet, but stay tuned 😄

Hello ana thank you very much again for reporting this issue! Sorry for the confusion 😄
Thank for the wait for the hydraulic shocks!

Добрый день. Ссылка на пружины 1,2мм https://aliexpress.ru/item/1005002799454021.html?spm=a2g2w.orderdetail.0.0.57ed4aa6YG80i2&sku_id=12000022240732173

Hello, the wheelbase is 315mm!

Hello! Sure, it will be definitely worth the wait. I'm very enthusiast for the amount of progress I made during this restoration. It is basically completed and I'm ready to upload but it is better for me to assemble the prints (just 24h and I will finish) and test it on the trails. Please thanks for the wait!

I think in 10 days maximum I will be ready for the release, no doubts!

Any update on the.. updated version? :)

Hello 😄 I uploaded the updated version one week ago, did you receive the email from cults?

Hah, no but I only found out about this yesterday and read the comments and thought an update was still pending! Thanks, I'll get it now then!

No worries 😄 Thank you again for supporting me with the project!
Enjoy the build!
Andrea

Hello and thank you for the message!
If you contact me by email at casado.design@gmail.com with a picture of the old part to be replaced I will send you again.
Additionally: I'm in the process of a full restoration of the 3RONCO project, if you wait a couple of weeks you will print a 99% new model 😄

Alright then, Ill wait to get the new model xD

Awesome, thanks for the wait! You will receive an email from cults3d when the update will be available 😄

Hello!
Thank you very much for the updtate, I can't wait to see it!
In the project link there is the "Makes" section, you can add the picture thereor, if you prefer, in the facebook community here: https://www.facebook.com/groups/775493833691324

sent to Makes :-)

Fantastic 😄

Hi 😄 Yes it is on my list, not in the short term but sure I will do it one day, maybe with a scale kit for overlanding :)

eSun works perfectly, it's my favourite actually 😄

Hello 😄 All PLA, as you can see from my other videos on the channel, it is very capable to withstand the stress! Thank you for the comments, for more info, see the printing matrix at page 4 of the build guide: https://docs.google.com/presentation/d/1vgg3ECQ3zXwCwEhFHAhD0obLD8UZk5s5yMSXM87mBBM/edit#slide=id.g13c51deebe7_32_0

Hello 😄

Yes, on the next few days I will release a new upgrade pack for the Jeep Wrangler YJ replica! You can see a preview on the facebook community: https://www.facebook.com/groups/775493833691324

This year I will release 2 new models! Stay tuned!
Andrea

Hello 😄
Yes you can use those parts, I think the ESC is going to have different "banana" connector size compared to the motor. But you can solder it without problems.
The motor is a little bit different from the recommended. Please send me an email to casadio.design@gmail.com so that I can send a custom part to fit the pinion.

Best regards
Andrea

Hello! Any clear plastic sheet with thickness from 0.5mm to 0.75mm will be great. Tamiya produce some nice plates but most of the user recycle it from clear packaging and also book covers 😄

Thanks! Kits are amazing, keep them coming!!

You are welcome! Stay tuned for the next models 😄

Hello my friend! I sent you an email because it seems I'm not allowed to access the link above 😄 Anyway, thank you so much for you proposal!!

Hello my friend. I made it all PLA and it is super-strong. You can check my video on youtube of the model running more than 9km endurance test! But in case you want to try other materials: PETG it is ok for not moving parts (body and frame), while ABS is ok for the moving parts like the gears .

Hi, I used Tinnmorry matte black PLA: https://tinmorry.net/products/pla-pro-filament-1-75mm-tinmorry-filament-1-75-pla-with-cardboard-spool-roll-filament-3d-printing-materials-1kg-black

Never mind I found the bottom of the materials list, I guess I should read everything first!

Hello and thank you for the message, yes you are correct. In case you need additional help please feel free to ask me anytime!

The instructions say to use grease on some of the parts, what type of grease should be used?

Any grease for RC or mechanical parts is ok. I personally use molybdenum grease on my transmission without any problem. Silicon grease is also ok. My suggestion is to avoid PTFE grease since in some countries it is going to be prohibited since it is harmful.

Hello my friend! I'm happy to read you again 😄
With this upgrades I burned the motor trying to break the transmission. It ended up with a lot of smoke! So proud for that result!!

Looking forward to see your build!

I mean, I remember your built, but I cant't wait to see with the latest updates!!

Hello, thanks for the question. There is no a complete kit ready to buy so far. But I'm looking forward to do it. Please check the non printed part list provided to find the suggested links and if you need any suggestion or do you prefer different ecommerce please let me know and I will support you 100% in the process! Non printed part list: https://docs.google.com/spreadsheets/d/1eKkBIz8t92os4657lJpzNdx0stXYUWt6CtREZGAz52Q/edit#gid=869185961

thank you so much for the response and also awesome design cant wait to print it out

awesome! Enjoy the built!

Hi and thank you so much for the amazing comment! I confirm this is designed to be an RC model fully working, you will find all the informations on the first few pages of the step-by-step build guide here: https://docs.google.com/presentation/d/1vgg3ECQ3zXwCwEhFHAhD0obLD8UZk5s5yMSXM87mBBM/edit#slide=id.g13c51deebe7_32_0

And if you want to see the RC model in action, check my youtube channel :) https://www.youtube.com/@casadioDesign/videos

Thank you so much again!

And stay tuned for the next model :)

I'm really sorry but I completely misanderstood your question 😅 I apologize for that! Yes the model can be printed just for display as a Lego Technic model, please let me know if you need any support during the build 😃
And again, sorry for the wrong answer above!

That's even better! I'm totally on board now. Are build instructions/parts list for the display build also included in the instructions?

Yes they are the same! For what is concerned the part list, all the parts for the static version are marked as "mandatory" while the remaining are all for the RC version 😃 also the metal spring are requested for the static version 😃 my suggestion: make sure to have a nice hex screwdriver with hardened head!

Hi, don't worry! Check the bar on the top right of this webpage, you will be able to set the currency to US dollars, please let me know if you need additional support. Just in case here is my office email: casadio.design@gmail.com

Hi, yes send me an email to casadio.design@gmail.com

Hi!
Unfortunately not yet, some customization is needed to fit metal chassis and gears from aliexpress. You can find more information on the build here: https://docs.google.com/presentation/d/1vgg3ECQ3zXwCwEhFHAhD0obLD8UZk5s5yMSXM87mBBM/edit

A guy of the facebook community did that customization, please ask the link if you want to have on look on his work.
Happy new year
Andrea

Hello :) yes I can do it, do you have any dimension? Or just need the counterpart that fit the trailer hitch currently installed on the model?

just the counterpart please. thank you

I'm doing it right now!

I sent you an email with the file!

Hello my friend! Yes it's clear. You would like to have a limited extension shock. I will put on my upgrade list, thank you for the proposal. In the meanwhile, if you need to adapt some commercial RC shock, I can easily adapt the crossbar and the swing arm to allow the installation. Just ask me, no problem! :)

What rc shock would you pick for the bronco

Sorry for the late reply! Something like this (max 70mm) should be ok but needs some modification. If you can wait some weeks I can try to update the current shock! https://it.aliexpress.com/item/4001114872491.html?spm=a2g0o.detail.0.0.59773432vJdlkg&gps-id=pcDetailBottomMoreThisSeller&scm=1007.13339.274681.0&scm_id=1007.13339.274681.0&scm-url=1007.13339.274681.0&pvid=d74e3b18-321e-4a72-b9ca-8daaa0585f8f&_t=gps-id%3ApcDetailBottomMoreThisSeller%2Cscm-url%3A1007.13339.274681.0%2Cpvid%3Ad74e3b18-321e-4a72-b9ca-8daaa0585f8f%2Ctpp_buckets%3A668%232846%238112%231997&pdp_ext_f=%7B%22sku_id%22%3A%2210000014501212954%22%2C%22sceneId%22%3A%223339%22%7D&pdp_npi=2%40dis%21EUR%21%2111.18%21%21%21%21%21%40211b58eb16579701604861023eb932%2110000014501212954%21rec&gatewayAdapt=glo2ita

Thank you

Welcome!

Hi, please send me an email to casadio.design@gmail.com I will send you the tool STL immediately :)

Hi and sorry for the late reply.

You can install the ESC under the hood and tie it with a zip tie :)

Feel free to contact me at the email: casadio.design@gmail.com to have more information and photos.

Thank you very much for downloading the files. It will support me a lot for the future projects!
Best regards
Andrea

Hi, at the moment I think there are no other wheels that fit on that model. Feel free to send me an email to aks me a wheel design (also beadlock): casadio.design@gmail.com

Hi Andrew! A Cults3D member designed a nice beadlock wheel, check it out: https://cults3d.com/en/3d-model/various/dc_torque_beadlock-bronco-1-8

Best regards
Andrea

What tires fit those wheels?

I think they are 3D printed by the creator of the rim. Anyway, check also my new beadlock design (link below). My design fits standard 1.9" tires https://cults3d.com/en/3d-printing/3ronco-fully-printable-1-8-scale-kit-andreacasadio-3

Thank you!

welcome :)