Skip to content
Free stl file Zheng3 LED Socket, Zheng3
Free stl file Zheng3 LED Socket, Zheng3
Preview 20141108 191817

Did you 3D print this model?

Zheng3 LED Socket

3D model description

Zheng3 LED Socket

3D printing settings

Zheng3 LED Socket

  • 3D model format: STL

Tags

Creator

Followers Following 0
Downloaded 3452
Sales $103

Seej patient zero. Barbie Armor Designer, artist, worst programmer ever. Mostly illiterate, but has minimal competence in spoken Mandarin. Not real clear on Ohm's law.

License

CC BY SA

Similar 3D files


Add a comment

One comment

ohms law is very easy V= volts, A=amps, R=resistance V=R*A or A=V/R or R=V/A some people use I or A current which is your current.
I do like your LED holder but you should add as resistor to it. figure out your voltage of your battery, Study your LED data sheet to find the max current.
Most are around 0.02 Milli amps so for a 3 volt battery 3/0.02=150 that is a 150 ohm resistor.
I hope this helps. And if you want to know the watts volts times Amps or .06 watts so really next to nothing.
Some batteries have an internal resistance but I don't recommend accounting for it as some will just push and your LED will just be a flash then dead.