Modular Self Service Car Wash 1/64 (FDM)

STL files for my modular self service car wash building.

This model is 1/64 scale so you can use it with your Hot Wheels, Matchbox, Greenlight and other cars in dioramas.

Car wash building is modular, so you can print it and use in different combinations.

Main sections are:
end sections - used on both ends
middle section - used in the middle between end sections (use as many as needed)
service area/container section - used in the middle between either end sections or middle sections.

The minimum layout is two sections (both end sections). All parts are designed based on real life sizes and proportions, so this thing will get big fast.

It comes with some generic texts that can be glued on roof side sections.

All parts should come together, but if needed adjust the size of bases in your slicer settings.

Because sections are large enough, there will always be some small gaps between sections mainly visible on roof areas, so if you want to avoid that you will need to glue everything together and fill the gaps with modelling putty.

no specific settings needed, tested on FDM printers
there are flat square sections so check that you don't get lifting corners, if needed use brim ears to solve that