1/14 RC Dozer Kobatchewy

This is a 1/14 scale RC dozer. It requires a few parts to make it RC.

The main chassis is about 220mm in length. I think it can print on an ender 3 as I put it on my Cura slicer and it accepted it. So it should print that part in one piece flat.

Everything in this build you can find in a video I will post on youtube for the build of this skidsteer. All the fasteners and electronics will be linked in the videos. If you have questions please let me know and I will try to respond in a timely manner. Also, if you need you can message me on facebook if you have questions.

Share your build and post pictures or videos on my Facebook group:
https://www.facebook.com/groups/25253386567645245

For a parts list see below.

The assembly videos:

https://youtu.be/YrIrby3ZqVY
https://youtu.be/MM70x90XjDo

If a link is no longer active let me know.

Parts to order:
https://www.actuonix.com/pq12-100-6-r (qty1) linear servo for 6 way blade

https://www.fingertechrobotics.com/proddetail.php?prod=ft-tinyESCv3

OR

https://magomhrc.com/en/speed-controller-esc/1289-bs5-brushed-esc.html (eurpoe)

(qty 4) ESC's for drive motors and linear motors for tilt and lift of blade

https://amzn.to/3vSV9WQ M3 screws
https://amzn.to/3GyQzBM ball joint
https://amzn.to/3CCoVD2 coupling for drive gear
https://amzn.to/3k7yH9S (try to find it at your local hobby shop for less $$$) (qty 2) Ball link for blade
https://amzn.to/3W5a9vk magnet for doors
https://amzn.to/3vSglw1 nut insert for linear servo for tilt blade
https://amzn.to/3QseuaE (qty 2 packs of 50) M3 set screws for tracks
https://amzn.to/3VWCIuR (qty2) motors for drive
https://amzn.to/3GUk82f bearings for idler wheels
https://amzn.to/3WXOGWo (12v 600rpm) this is part of the customer linear tilt for the blade
https://amzn.to/3CE6TQR plexiglass for windows
https://amzn.to/3CE76n7 BEC to manage voltage for servos connections
https://amzn.to/3WYOg2c M3 button head screws for tight areas instead of the regular M3 cap screws
https://amzn.to/3GTaU6d Springs for the idlers wheel assembly
https://amzn.to/3imgBk1 M4 rod for blade assembly

https://www.aliexpress.com/item/10050...
(12V 15MMS 64N, 30mm stroke) linear actuators for lift of blade

https://www.aliexpress.com/item/40010...
(M2x8 Black) special M2 screws for front idler and cab attach.

https://www.aliexpress.com/item/40010...
(screwdriver M2) this is the drive for those M2 screws

https://www.aliexpress.com/item/10050...
Hinges for the doors.

If I am missing anything please let me know.

All printed in .20 layer height. Some parts require supports while others do not. I would suggest a line count of 4 instead of the standard 2 or 3. It removes a lot of the infill and prints faster.