Toyota Prius 2016–2021 Mirror Cover LH & RH STL | OEM Fit Replacement | XW50

High-quality OEM-fit replacement mirror covers for Toyota Prius 2016–2021 (XW50), precisely 3D scanned from an original part.

Tested on real printer and real vehicle for accurate fitment.

Perfect solution for broken, scratched or missing mirror covers without replacing the entire mirror assembly.

This is a complete set of replacement side mirror covers (Left and Right) specifically designed for Toyota Prius XW50 (2016–2021). After carefully modeling based on OEM geometry, these reinforced versions are created to replace damaged, scratched, or missing factory mirror caps. Precisely 3D scanned from an original OEM part to guarantee perfect fit and factory-like appearance. The design ensures a clean fit, solid mounting, and OEM-like appearance once installed and painted.

Compatibility:
Toyota Prius (XW50) – 2016, 2017, 2018, 2019, 2020, 2021

Toyota Prius Prime – 2017–2021

Toyota Prius AWD-e – 2019–2021

OEM Reference:

Left (LH): 87945-47060

Right (RH): 87915-47070

What You Get:

Left Mirror Cover (LH) – STL file

Right Mirror Cover (RH) – STL file

Wondering how to 3D print it for best results? This model is optimized for easy and reliable printing with common materials.

3D Printing Settings:

Material: PETG, ABS or ASA (ASA/ABS recommended for outdoor durability)

Infill: 30–50% (Gyroid recommended)

Wall Loops: Minimum 3–4 walls

Layer Height: 0.2 mm

Supports: Minimal tree supports
Orientation: Print with outer surface vertically or slightly angled for best finish

The parts are designed to fit on standard 3D printers (180x180 mm and above).

Notes:

Designed for excellent fit and easy installation

May require light sanding and painting for OEM finish

Compatible with versions with integrated turn signal mirrors

Test fit recommended before final finishing

Need it printed? If you are in Bulgaria, you can order a ready-made printed part here: https://3dprintburgas.com

Material: PETG, ABS or ASA (ASA/ABS recommended for outdoor durability)

Infill: 30–50% (Gyroid recommended)

Wall Loops: Minimum 3–4 walls

Layer Height: 0.2 mm

Supports: Minimal tree supports
Orientation: Print with outer surface vertically or slightly angled for best finish

The parts are designed to fit on standard 3D printers (180x180 mm and above).