Gachiakuta - Zanka Nijiku Lovely Assiststaff

This model is designed for Zanka cosplay from Gachiakuta anime/manga series.

It is the regular Lovely Assistaff that Zanku used outside his serious battle, this is NOT the vital form obviously.

The model is cut into parts to fit in a printer with a platform size of 200mm x 200mm x 200mm. there is a picture with parts labeled to their file names in the preview section which you can refer to.

I also include a combined version just in case you need it.

If you have a multicolor system, the cut are placed at position produce the least poop and most time saving. However, if you want to make your own cut, you can use the combined version.

There is a 1250mm tunnel with diameter of 10mm punched on the model for bone and alignment purposes. You can use wooden or iron rod with similar diameter for this purposes.

In order to avoid using curved tunnel, I make a built-in peg and cavities as guide for installation on parts 1, 9,10, and 11. If support are applied on the cavities and built-in peg, removed them thoroughly for easier insert. Depending on print quality and accuracy, some sanding and putty application are expected.

For scaling, please use the same scale for all the parts and pieces.

Cheers and Happy Printing!

Dimension: 1473.53mm x 225.54mm x 30mm