Stacked Cubes Lamp – Geometric Art for Your Tabletop – 3D Printed Modern Light for Sleek Interiors

About This Product;
The Wall Thickness of the Upper Body (Chandelier) Section is 0.8mm

OUR LAMP DESIGNS ARE DESIGNED TO BE PRINTED WITHOUT SUPPORT

DESIGNED FOR E27 SOCKET

Top Side (White Side) = 180 gr

Bottom Side (Socket Side) = 95 gr

The Lower Section is Designed to be Self-Ribbed for Unsupported Printing.
The Upper Body Section is Designed to be Self-Ribbed for Unsupported Printing.

The Product Dimensions are Also Available in the Visual.

Materials You Need to Buy Extra for the Product
1-Bulb
2-Chandelier Socket
3-If You Want to Add (Switch)
4-Radio Cable (You Need to Cut the End Socket, You Need to Mount the Socket with Two Cables, No Extra Soldering or Welding is Required During Mounting)
NOTE: It is Designed to be Mounted with the Chandelier Socket. You can put 3 small grooved screws from the screw holes.
(Preferred Color (NW: Naturel White)

After printing, you will assemble it by rotating the grooved (male and female) parts. the process is that simple.

Best regards;
@HALKA3D

Instagram:@halka3d

Sold for Private Use. Commercial Sale is Strictly Prohibited.

3d printer (Fdm) STL