Aller au contenu
Publicité

ItsLitho "Pure" personalized lithophane Christmas ball

Vignette.png ItsLitho "Pure" personalized lithophane Christmas ball
Cults2.png ItsLitho "Pure" personalized lithophane Christmas ball
Cults-3.png ItsLitho "Pure" personalized lithophane Christmas ball
Cults-1.png ItsLitho "Pure" personalized lithophane Christmas ball
Placement-Cura.png ItsLitho "Pure" personalized lithophane Christmas ball
Garland-design2.png ItsLitho "Pure" personalized lithophane Christmas ball
Garland-design.png ItsLitho "Pure" personalized lithophane Christmas ball
Light-type.png ItsLitho "Pure" personalized lithophane Christmas ball
Light-type2.png ItsLitho "Pure" personalized lithophane Christmas ball
PureTop Diam9mm.stl ItsLitho "Pure" personalized lithophane Christmas ball
PureTop Diam11.2mm.stl ItsLitho "Pure" personalized lithophane Christmas ball
PureBottom.stl ItsLitho "Pure" personalized lithophane Christmas ball
Ring2.stl ItsLitho "Pure" personalized lithophane Christmas ball
PureTop Diam12.2mm.stl ItsLitho "Pure" personalized lithophane Christmas ball
Publicité
Partager
Ajouter Ă 
Make
?
Qualité de la création : 3,5/5 (13 votes)
Évaluation des membres sur l’imprimabilitĂ©, l’utilitĂ©, les dĂ©tails, etc.
Licence
Usages
Format du design 3D
6 fichiers (STL) Fermer
  • ItsLitho_Christmas1-2.stl
  • PureBottom.stl
  • PureTop Diam11.2mm.stl
  • PureTop Diam12.2mm.stl
  • PureTop Diam9mm.stl
  • Ring2.stl

En savoir plus sur les formats
DerniĂšre mise Ă  jour
Date de publication
Numéro du design 553635
Ludo3D

Ludo3D

Compte certifié
Vous rencontrez un souci avec ce design ? Signaler un problÚme.

9 commentaires

Ajouter un commentaire

👉 Connectez-vous pour Ă©crire un message

9 commentaires

Jesniki
Jesniki

Hi, I don't want to sound negative. I think I may need a refund. I printed them flat like you said and they are a hire to small. I bought yours because I thought it would save me time but I already had a free one that I had gotten from somewhere. I will just be using it. The tops fall out of the ornament

  • 1 j’aime
Ludo3D
Ludo3D

Hi, it seams to me that you could increase model size by 0.5 or 1% on your slicer. You could also add 1 or 2 drops of glue to fix the top. I can refund but in case of model issue or trouble. It's not clearly the case here.
Ludo

tamy-tschannen
tamy-tschannen

Kannst du mir sagen wo du die kostenlose her hast?
timjeanette
timjeanette

I purchased the files but am having a horrible time. I have a Bambu P1S printer. What do I need to open file in to get it to print correctly? It says there is a floating spot. Do you use supports?

Ludo3D
Ludo3D

Hello, it's difficult for me to help you with your printer as I don't know it. What IS sure is that you don't need any support.
Regards,
Ludo
benfikista
benfikista

No permission to sale... No much use

Ludo3D
Ludo3D

Hello,
As most of the models proposed on Cults. Nothing new here.

Regards,
Ludo

  • 1 j’aime
le_calmar_printeux
le_calmar_printeux

For the top and bottom parts, i print them at 101.3% and they clip tight on the ball. And even at this size, the light (11.2mm one) fit tight in the hole, i have to push on the bulb because i can't pull it. I print the ball at 100% and seriouslym everything is perfect. My only concern now is on the photo fittement side. Not all images fit well on the ball. My best setting for now, is the 2 images at the 360x240 pixels size but not every photo fit well. If the person's face fit well on the center of the ball, the body will follow the shape of the sphere and the body will be very thin at the bottom part so there's some tuning for this fittment but overall i like it.

  • 1 j’aime
Ludo3D
Ludo3D

Hello,
Thank you for your feedback. For the picture sizing, did you have a look here: https://itslitho.com/lithophane-guides/christmas-ornament-3d-print-your-personalized-christmas-balls/

Regards,
Ludo
ironnix
ironnix

Can you show a pic of the light bulb used or a link to purchase th bulb

Ludo3D
Ludo3D

Hello,
Some pics are already shared in the description.
Regards,
Ludo
DZY3D
DZY3D

does not clip together as advertised. Disappointed.

Ludo3D
Ludo3D

Hello, you can try to adjust the top and bottom parts size on your slicer. Reduce or increase by 1 or 2 percents. It should work.
Regards,
Ludo
mrmonotone
mrmonotone

can you change the sphere diameter and the top and bottom will still fit (is it parameterized to adjust)?
Basstronics
Basstronics

I am finding that the Pure 11.2 is to tight to fit the purchased bulbs. Any help here?

3DNC
3DNC

I have tried this repeatedly, sadly the concave nature of the top and bottom causes the slicer (PrusaSlicer) to not print anything for the bulb on the first layer, which causes failures every time. Perhaps you can adjust the tops and bottoms so it can print properly?

thedibbler
thedibbler

I don't use the Prusa slicer but I did have success by manually setting a slightly negative z offset. I used -0.09 in Simplify3d and was able to get successful prints.

  • 1 j’aime
mary9
mary9

I am having the same issue, also in PrusaSlicer. I cannot find a way to have a negative z offset, so not able to use that trick.

thedibbler
thedibbler

I’m not sure how you can do it on prusaslicer but it may not be called a a offset in that slicer. If you can manually move the model down just a hair below the plane it should accomplish the same thing. I’m just moving it down slightly less than a millimeter.

NewVisionCollective
NewVisionCollective

Maybe this has been fixed, because I am not having the same problem. The model does come in oriented wrong but once you place it on the flat side you should be okay. I have had this problem with other models and here is a fix. With Prusaslicer you cannot lower the model below the plate like other slicers, BUT you can split the model. Use this (check only keep top) to remove the bottom 0.1mm or so to give your model a nice flat bottom to stick to the build plate

Vous souhaitez soutenir Cults ?

Vous aimez Cults et vous avez envie de nous aider Ă  continuer l’aventure en toute indĂ©pendance ? Sachez que nous sommes une petite Ă©quipe de 4 personnes et qu’il est donc trĂšs simple de nous soutenir pour maintenir l’activitĂ© et crĂ©er les futurs dĂ©veloppements. Voici 3 solutions accessibles Ă  tous :

  • PUBLICITÉ : DĂ©sactivez votre bloqueur de publicitĂ©.
  • DON : Faire un don via Ko-Fi Faire un don
  • BOUCHE À OREILLE : Invitez vos amis Ă  venir dĂ©couvrir le site et les magnifiques fichiers 3D partagĂ©s par la communauté !

Partager et tĂ©lĂ©charger sur Cults3D c’est garantir que les designs restent bien entre les mains de la communautĂ© des makers ! Et non celles des gĂ©ants de l’impression 3D ou du software qui possĂšdent les plateformes concurrentes et qui exploitent les designs pour leurs propres intĂ©rĂȘts commerciaux.

Cults3D est un site indĂ©pendant et autofinancĂ© qui n’a de compte Ă  rendre Ă  aucun investisseur ou aucune marque. La quasi totalitĂ© des revenus du site sont reversĂ©s aux makers de la plateforme. Les contenus publiĂ©s sur le site servent uniquement les intĂ©rĂȘts de leurs auteurs et pas ceux des marques d’imprimantes 3D qui souhaitent aussi contrĂŽler le marchĂ© de la modĂ©lisation 3D.