Zum Inhalt gehen
Werbung

Greater Good | Neue Erweiterung, Aegis-Drohnen

Aegis-team-1.png Greater Good | Neue Erweiterung, Aegis-Drohnen
Aegis-team-2.png Greater Good | Neue Erweiterung, Aegis-Drohnen
Aegis-spread.png Greater Good | Neue Erweiterung, Aegis-Drohnen
Aegis-alternatives.png Greater Good | Neue Erweiterung, Aegis-Drohnen
Aegis-bits-1.png Greater Good | Neue Erweiterung, Aegis-Drohnen
Werbung
Machen Sie ein Angebot
Teilen
Hinzufügen zu
Make
?
Qualität der Kreation: 5/5 (1 abstimmen)
Bewertung von Mitgliedern zu Druckbarkeit, Nützlichkeit, Detailgrad usw.
Lizenz
Verwendungszwecke
3D-Design-Format
1 Datei (ZIP) Schließen
  • Aegis Drone Kit.zip
    • OBJ Raw/Arms/A Arm left .obj
    • OBJ Raw/Arms/A Arm Right .obj
    • OBJ Raw/Arms/B Arm right.obj
    • OBJ Raw/Arms/C Arm left.obj
    • OBJ Raw/Arms/C Arm right.obj
    • OBJ Raw/Arms/D Arm left.obj
    • OBJ Raw/Arms/D Arm right.obj
    • OBJ Raw/Arms/E Arm left.obj
    • OBJ Raw/Arms/F Arm left.obj
    • OBJ Raw/Arms/F Arm right.obj
    • OBJ Raw/Arms/shoulder pad A left.obj
    • OBJ Raw/Arms/shoulder pad A right.obj
    • OBJ Raw/Arms/shoulder pad B left.obj
    • OBJ Raw/Arms/shoulder pad B right.obj
    • OBJ Raw/Arms/shoulder pad C left.obj
    • OBJ Raw/Arms/shoulder pad C right.obj
    • OBJ Raw/Arms/shoulder pad D.obj
    • OBJ Raw/Bits and Equipment/Antenna_fin.obj
    • OBJ Raw/Bits and Equipment/Antenna_large.obj
    • OBJ Raw/Bits and Equipment/Antenna_small.obj
    • OBJ Raw/Bits and Equipment/Clip cap large.obj
    • OBJ Raw/Bits and Equipment/Clip_cap type 2.obj
    • OBJ Raw/Bits and Equipment/Clip_cap.obj
    • OBJ Raw/Bits and Equipment/Drone controller .obj
    • OBJ Raw/Bits and Equipment/Female2x_Connector.obj
    • OBJ Raw/Bits and Equipment/Multitracker.obj
    • OBJ Raw/Bits and Equipment/Shield_generator.obj
    • OBJ Raw/Bits and Equipment/Small Tracker.obj
    • OBJ Raw/Bits and Equipment/Smoke launcher.obj
    • OBJ Raw/Bits and Equipment/Target lock.obj
    • OBJ Raw/Bits and Equipment/Tracker.obj
    • OBJ Raw/Body/Body B.obj
    • OBJ Raw/Body/Body E.obj
    • OBJ Raw/Body/Body.obj
    • OBJ Raw/Body/Extra armour with Bar and Blades.obj
    • OBJ Raw/Body/Extra armour with Bar.obj
    • OBJ Raw/Body/Extra armour with Blades.obj
    • OBJ Raw/Heads/Head type 1.obj
    • OBJ Raw/Heads/Head type 2.obj
    • OBJ Raw/Heads/Head type 3.obj
    • OBJ Raw/Heads/Head type 4.obj
    • OBJ Raw/Heads/Head type 5.obj
    • OBJ Raw/Heads/Head type 6.obj
    • OBJ Raw/Heads/Head type 7.obj
    • OBJ Raw/Legs/Legs A.obj
    • OBJ Raw/Legs/Legs B.obj
    • OBJ Raw/Legs/Legs C.obj
    • OBJ Raw/Legs/Legs D.obj
    • OBJ Raw/Legs/Legs E.obj
    • OBJ Raw/Legs/Legs F.obj
    • OBJ Supported/Arms/LYS_A Arm left (repaired).lys
    • OBJ Supported/Arms/LYS_A Arm Right (repaired).lys
    • OBJ Supported/Arms/LYS_B Arm right (repaired).lys
    • OBJ Supported/Arms/LYS_C Arm left (repaired).lys
    • OBJ Supported/Arms/LYS_C Arm right (repaired).lys
    • OBJ Supported/Arms/LYS_D Arm left (repaired).lys
    • OBJ Supported/Arms/LYS_D Arm right (repaired).lys
    • OBJ Supported/Arms/LYS_E Arm left (repaired).lys
    • OBJ Supported/Arms/LYS_F Arm left (repaired).lys
    • OBJ Supported/Arms/LYS_F Arm right (repaired).lys
    • OBJ Supported/Arms/LYS_shoulder pad A right (repaired).lys
    • OBJ Supported/Arms/LYS_shoulder pad B right (repaired).lys
    • OBJ Supported/Arms/LYS_shoulder pad C right (repaired).lys
    • OBJ Supported/Arms/LYS_shoulder pad D (repaired).lys
    • OBJ Supported/Arms/SUPPORTED_A Arm left (repaired) (repaired).obj
    • OBJ Supported/Arms/SUPPORTED_A Arm Right (repaired) (repaired).obj
    • OBJ Supported/Arms/SUPPORTED_B Arm right (repaired) (repaired).obj
    • OBJ Supported/Arms/SUPPORTED_C Arm left (repaired) (repaired).obj
    • OBJ Supported/Arms/SUPPORTED_C Arm right (repaired) (repaired).obj
    • OBJ Supported/Arms/SUPPORTED_D Arm left (repaired) (repaired).obj
    • OBJ Supported/Arms/SUPPORTED_D Arm right (repaired) (repaired).obj
    • OBJ Supported/Arms/SUPPORTED_E Arm left (repaired) (repaired).obj
    • OBJ Supported/Arms/SUPPORTED_F Arm left (repaired) (repaired).obj
    • OBJ Supported/Arms/SUPPORTED_F Arm right (repaired) (repaired).obj
    • OBJ Supported/Arms/SUPPORTED_shoulder pad A left (repaired) (repaired).obj
    • OBJ Supported/Arms/SUPPORTED_shoulder pad A right (repaired) (repaired).obj
    • OBJ Supported/Arms/SUPPORTED_shoulder pad B left (repaired) (repaired).obj
    • OBJ Supported/Arms/SUPPORTED_shoulder pad B right (repaired) (repaired).obj
    • OBJ Supported/Arms/SUPPORTED_shoulder pad C left (repaired) (repaired).obj
    • OBJ Supported/Arms/SUPPORTED_shoulder pad C right (repaired) (repaired).obj
    • OBJ Supported/Arms/SUPPORTED_shoulder pad D (repaired) (repaired).obj
    • OBJ Supported/Bits and Equipment/LYS_Antenna_fin.lys
    • OBJ Supported/Bits and Equipment/LYS_Antenna_large.lys
    • OBJ Supported/Bits and Equipment/LYS_Antenna_small.lys
    • OBJ Supported/Bits and Equipment/LYS_Clip cap large.lys
    • OBJ Supported/Bits and Equipment/LYS_Clip_cap type 2.lys
    • OBJ Supported/Bits and Equipment/LYS_Clip_cap.lys
    • OBJ Supported/Bits and Equipment/LYS_Drone controller .lys
    • OBJ Supported/Bits and Equipment/LYS_Female2x_Connector.lys
    • OBJ Supported/Bits and Equipment/LYS_Multitracker.lys
    • OBJ Supported/Bits and Equipment/LYS_Shield_generator.lys
    • OBJ Supported/Bits and Equipment/LYS_Small Tracker.lys
    • OBJ Supported/Bits and Equipment/LYS_Smoke launcher.lys
    • OBJ Supported/Bits and Equipment/LYS_Target lock.lys
    • OBJ Supported/Bits and Equipment/LYS_Tracker.lys
    • OBJ Supported/Bits and Equipment/SUPPORTED_Antenna_fin (repaired).obj
    • OBJ Supported/Bits and Equipment/SUPPORTED_Antenna_large (repaired).obj
    • OBJ Supported/Bits and Equipment/SUPPORTED_Antenna_small (repaired).obj
    • OBJ Supported/Bits and Equipment/SUPPORTED_Clip cap large (repaired).obj
    • OBJ Supported/Bits and Equipment/SUPPORTED_Clip_cap (repaired).obj
    • OBJ Supported/Bits and Equipment/SUPPORTED_Clip_cap type 2 (repaired).obj
    • OBJ Supported/Bits and Equipment/SUPPORTED_Drone controller (repaired).obj
    • OBJ Supported/Bits and Equipment/SUPPORTED_Female2x_Connector (repaired).obj
    • OBJ Supported/Bits and Equipment/SUPPORTED_Multitracker (repaired).obj
    • OBJ Supported/Bits and Equipment/SUPPORTED_Shield_generator (repaired).obj
    • OBJ Supported/Bits and Equipment/SUPPORTED_Small Tracker (repaired).obj
    • OBJ Supported/Bits and Equipment/SUPPORTED_Smoke launcher (repaired).obj
    • OBJ Supported/Bits and Equipment/SUPPORTED_Target lock (repaired).obj
    • OBJ Supported/Bits and Equipment/SUPPORTED_Tracker (repaired).obj
    • OBJ Supported/Body/LYS_Body B (repaired).lys
    • OBJ Supported/Body/LYS_Body E (repaired).lys
    • OBJ Supported/Body/LYS_Body.lys
    • OBJ Supported/Body/LYS_Extra armour with Bar (repaired).lys
    • OBJ Supported/Body/LYS_Extra armour with Bar and Blades (repaired).lys
    • OBJ Supported/Body/LYS_Extra armour with Blades (repaired).lys
    • OBJ Supported/Body/SUPPORTED_Body (repaired).obj
    • OBJ Supported/Body/SUPPORTED_Body B (repaired) (repaired).obj
    • OBJ Supported/Body/SUPPORTED_Body E (repaired) (repaired).obj
    • OBJ Supported/Body/SUPPORTED_Extra armour with Bar (repaired) (repaired).obj
    • OBJ Supported/Body/SUPPORTED_Extra armour with Bar and Blades (repaired) (repaired).obj
    • OBJ Supported/Body/SUPPORTED_Extra armour with Blades (repaired) (repaired).obj
    • OBJ Supported/Heads/LYS_Head type 1.lys
    • OBJ Supported/Heads/LYS_Head type 2 (repaired).lys
    • OBJ Supported/Heads/LYS_Head type 3 (repaired).lys
    • OBJ Supported/Heads/LYS_Head type 4 (repaired).lys
    • OBJ Supported/Heads/LYS_Head type 5 (repaired).lys
    • OBJ Supported/Heads/LYS_Head type 6.lys
    • OBJ Supported/Heads/LYS_Head type 7 (repaired).lys
    • OBJ Supported/Heads/SUPPORTED_Head type 1 (repaired).obj
    • OBJ Supported/Heads/SUPPORTED_Head type 2 (repaired) (repaired).obj
    • OBJ Supported/Heads/SUPPORTED_Head type 3 (repaired) (repaired).obj
    • OBJ Supported/Heads/SUPPORTED_Head type 4 (repaired) (repaired).obj
    • OBJ Supported/Heads/SUPPORTED_Head type 5 (repaired) (repaired).obj
    • OBJ Supported/Heads/SUPPORTED_Head type 6 (repaired).obj
    • OBJ Supported/Heads/SUPPORTED_Head type 7 (repaired) (repaired).obj
    • OBJ Supported/Legs/LYS_Legs A (repaired).lys
    • OBJ Supported/Legs/LYS_Legs B (repaired).lys
    • OBJ Supported/Legs/LYS_Legs C (repaired).lys
    • OBJ Supported/Legs/LYS_Legs D (repaired).lys
    • OBJ Supported/Legs/LYS_Legs E (repaired).lys
    • OBJ Supported/Legs/LYS_Legs F (repaired).lys
    • OBJ Supported/Legs/SUPPORTED_Legs A (repaired) (repaired).obj
    • OBJ Supported/Legs/SUPPORTED_Legs B (repaired) (repaired).obj
    • OBJ Supported/Legs/SUPPORTED_Legs C (repaired) (repaired).obj
    • OBJ Supported/Legs/SUPPORTED_Legs D (repaired) (repaired).obj
    • OBJ Supported/Legs/SUPPORTED_Legs E (repaired) (repaired).obj
    • OBJ Supported/Legs/SUPPORTED_Legs F (repaired) (repaired).obj

Mehr zu den Formaten
Datum der Veröffentlichung
Entwurfsnummer 2055760
Neotericminiatures

Neotericminiatures

Zertifiziertes Konto
Problem mit diesem Design? Ein Problem melden.

3D-Druckerdatei info

Beschreibung des 3D-Modells

Aegis-Drohnen sind eine Nahkampfunterstützungseinheit, die Offensivfähigkeiten im Nahbereich und Hinterhaltpotenzial bieten soll. Normalerweise werden sie in Teams von 3 oder 6 Personen eingesetzt.

Empfohlene 50-mm-Basis

3D-Druckeinstellungen

Alle Dateien werden vor der Freigabe auf dem Anycubic Photon M3 mit den Standardeinstellungen für Anycubic-Harze testgedruckt.

Kategorien

Alle Kategorien › Spiel › RPG-Tabletop / Action-Figuren / Brettspiele

Keywords

Werbung

Seite mithilfe von automatischer Übersetzung übersetzt. Originalversion ansehen.

Möchtest du Cults unterstützen?

Gefällt dir Cults und möchtest du uns dabei helfen,das Abenteuer in völliger Unabhängigkeit fortzusetzen? Beachte, dass wir ein kleines Team von 4 Personen sind und dass es daher sehr einfach ist, uns dabei zu unterstützen, weiterhin im Geschäft zu bleiben und zukünftige Entwicklungen zu schaffen. Hier sind 3 Lösungen, die allen zugänglich sind:

  • WERBUNG: Deaktiviere deinen Werbeblocker.
  • SPENDE: Wenn du möchtest, hast du die Möglichkeit, uns hier über Ko-FI eine Spende zukommen zu lassen Spenden
  • MUNDPROPAGANDA: Lade deine Freunde dazu ein, die Website und die großartigen 3D-Dateien kennenzulernen, die von der Community geteilt werden!

Das Teilen und Hochladen auf Cults3D garantiert, dass die Designs in den Händen der Maker-Gemeinschaft bleiben! Und nicht in den Händen der Riesen der 3D-Druck- oder Softwarebranche, die die Konkurrenzplattformen besitzen und die Designs für ihre eigenen kommerziellen Interessen ausnutzen.

Cults3D ist eine unabhängige, selbstfinanzierte Website, die keinem Investor oder keiner Marke verpflichtet ist. Fast alle Einnahmen der Website gehen an die Maker der Plattform. Die auf der Seite veröffentlichten Inhalte dienen nur den Interessen ihrer Autoren und nicht denen von 3D-Druckermarken, die auch den Markt für 3D-Modellierung kontrollieren möchten.