EP-N5 Transportwagen

This is my model of the EP-N5 Transport Cart. This is used in the Narkina 5 Prison Factory in Season 1 of the Andor series to transport completed EP-N5 Fastener assemblies to the collection port in the factory. This is modeled at 1/12 scale, and is designed to be displayed with Hasbro Black Series action figures.

This is the second part in my Narkina 5 set. The EP-N5 is already finished and can be found on Cults3d. Still to come are the work table and tools set and the cell block set.

This is an all resin model, and assembly is pretty straightforward. You will need some superglue. There are 2 ways to build this model:
1. As a working cart, using bearings for wheels, The bearings I used are 5x11x5mm 685ZZ bearings I bought on Ebay for $14 for a set of 12. You will need 6 of them.
2. As a static model, without rolling wheels.

Approximate Total Print Time (For my printer, provided for example). Your print times may vary. I was able to easily fit all the parts on a single build plate for my Photon Mono X 6K.
Resin: 9 hours

Instructions are included. The parts are oriented the way I printed them. You will need to slice and support them on your own.

There are a total of 13 individual parts, printed in the following quantities:

These parts are required for both versions
Grille.stl - Print 1
Bumper.stl - Print 1
Cart Front.stl - Print 1
Cart Back.stl - Print 1
Skirt.stl - Print 1

These parts are for the non-rolling static model
Body Fixed Wheels.stl - Print 1
Caster Fixed Left.stl - Print 2
Caster Fixed Right.stl - Print 2

These parts are for the working caster model with bearings for wheels
Body Caster Wheels.stl - Print 1
Caster Bearing Back Right.stl - Print 1
Caster Bearing Back Left.stl - Print 1
Caster Bearing Front Right.stl - Print 1
Caster Bearing Front Left.stl - Print 1

These models were designed in Rhino 7, and printed on an Anycubic Photon Mono X 6K using ABS-Like Pro 2 resin.