Christmas Holiday Clock für Regal Schreibtisch oder Wand

Timeline Clock Holidays Edition - HDNC02

Dimensions: 200 x 200 x 45 mm

This is the Holiday Edition of our simple, elegant, playful Timeline clock. Its dial is wrapped with a string (preferably wool), which can be used to mark the time, or as a playful decoration to be changed from time to time. The Timeline clock can be hung on a wall or placed on a shelf, desk, or mantel.

In addition to the 3D printed components, to assemble the Timeline Clock, you will also need a string or wool strand and a standard clock movement with a 10mm (0.375 inches) threaded shaft.

The dial is designed to snap-fit and lock into the frame. Just push it gently from the back until the snaps lock properly. The string does not keep the frame and dial together; they are merely decorative. Notches are provided in the front and back to hold the string and align it with the hour marks. Use them to prevent the string from slipping, but don’t feel restricted by them. Just use your creativity; the possibilities are endless.

Check out other cheerful ornaments and accessories in our Holidays Collection

Objects in the photographs were printed on a standard desktop 3D printer, without secondary operations.

Printable Objects designs simple, elegant, and sustainable home decor for 3D Printing. Our thoughtfully crafted solutions are easy to customize and print, empowering you to easily create beautiful, practical objects sustainably and affordably. We make high-quality design more accessible than ever through the power of digital distribution and 3D printing. Find out more at printableobjects.com

Follow Printable Objects on Instagram for the latest ideas in 3D printed home decor: @printable_objects

Largest build volume: 200 x 200 x 45 mm

Nozzle: 0.4
Layer: 0.2
Supports: NO
Infill: 15% Gyroid
Scalable: Yes (use dial without hole)
Tested with: PLA

Since some printers create aberrations around holes (especially noticeable with transparent/translucent materials), two files are included, one with a hole and one without. Choose the one that best suits your printer.

For the clock hands: The easiest solution is to purchase hands for your specific movements, often clock movements sold online or in hobby stores come with a set of hands of your choice. In this case, the length of the minute hand should be approximately 70mm (2.75 inches) from the center of the hole fitting the shaft. If you want to print your own hands to match the ones in the pics, the included files are for a press-on clock movement. Three different-sized holes are provided, but given the different movements on the market and the tight tolerances required, it is virtually impossible to expect they will fit properly. Just print the closest (smaller) size and gently rim the hole with the proper drill bit. Please refer to the guide in the pictures to select the best starting option, one of the provided files simply has a 2mm pilot hole.