Salto H101 RC glider w/retractable EDF 50mm or Folding Prop

RC Glider Salto H101 1:6, wingspan 2552 mm, TOW 2100-2300 g, homage to the vintage WIK Salto out of the 70s, new 4flap-wing design with a modern JX airfoil (Vtail HT33)

all files included for 3 versions:
glider solo, glider with motor/prop, glider with retractable edf,
also included CG/ transportation stand

rc equipment:
6x HV servo 2xFlap/2xAil/2xVtail Ele Rud
1x HV servo retractable EDF (optional)
1x ESC minimal 50A, HV BEC
8CH receiver
4s Accu 3000mAh
no gyro

optional:
50mm EDF (FMS) or
outrunner motor (Dualsky) with folding Prop 10x6

a list of all additional parts and settings as well as building instructions are included in the download

under construction: 6s 64mm retractable EDF,
pendulum Vtail, "Hotliner" v3 wing

maiden and first flights
https://youtu.be/D2CZtmN02xU?si=s0jTz2DLepvhXvs0

"how to build and more" video under construction

don't hesitate to contact me via comment section of this design if you have any questions or problems

"a handsome glider for everyday", happy printing

minimal print volume 220x220x250, for best results use a printer with core x/y, protoype was printed on kartesic (bed-mover) printer, due to the thin airfoil, the small flap, ail and elevator parts might have unprecise areas and need some post-processing

all parts printed in LW PLA (flow75) oder PETG HS,
each stl has a specific number and material/print recommendation

example: 01 canopy part1 v4 LW 1224 =
part No. 01, Version 4, printed with LW PLA (best results with colorFabb LW filament) and 1wall, 2top, 2bottom, 4%gyroid infill

all functional PETG HS parts normaly with flow 100, 222 20, or defined

!LW tolerances for vertical printing!

only R right stl's for wing, flap, ail and Vtail parts, mirror in your slicer