Aller au contenu

Kriss Vector Gen 1

KVMain.png Kriss Vector Gen 1
KV2.png Kriss Vector Gen 1
KV3.png Kriss Vector Gen 1
KV4.png Kriss Vector Gen 1
Mag1.png Kriss Vector Gen 1
Mag2.png Kriss Vector Gen 1
Body.png Kriss Vector Gen 1
Stock.png Kriss Vector Gen 1
Compact.png Kriss Vector Gen 1
FrontSight.png Kriss Vector Gen 1
RearSight.png Kriss Vector Gen 1
ADS.png Kriss Vector Gen 1
5.5Inch_barrel.obj Kriss Vector Gen 1
5.5Inch_barrel.stl Kriss Vector Gen 1
Bolt.obj Kriss Vector Gen 1
Bolt.stl Kriss Vector Gen 1
Bullet.obj Kriss Vector Gen 1
Bullet.stl Kriss Vector Gen 1
Charging handle.obj Kriss Vector Gen 1
Charging handle.stl Kriss Vector Gen 1
Front.obj Kriss Vector Gen 1
Front.stl Kriss Vector Gen 1
Lower receiver.obj Kriss Vector Gen 1
Lower receiver.stl Kriss Vector Gen 1
Mag.obj Kriss Vector Gen 1
Mag.stl Kriss Vector Gen 1
Rear.obj Kriss Vector Gen 1
Rear.stl Kriss Vector Gen 1
Stock pin.obj Kriss Vector Gen 1
Stock pin.stl Kriss Vector Gen 1
Top receiver.stl Kriss Vector Gen 1
Original Stock.stl Kriss Vector Gen 1
Original Stock.obj Kriss Vector Gen 1
9mmRound.obj Kriss Vector Gen 1
9mmRound.stl Kriss Vector Gen 1
Casing.obj Kriss Vector Gen 1
Casing.stl Kriss Vector Gen 1
KVMain.png Kriss Vector Gen 1
KV2.png Kriss Vector Gen 1
KV3.png Kriss Vector Gen 1
KV4.png Kriss Vector Gen 1
Mag1.png Kriss Vector Gen 1
Mag2.png Kriss Vector Gen 1
Body.png Kriss Vector Gen 1
Stock.png Kriss Vector Gen 1
Compact.png Kriss Vector Gen 1
FrontSight.png Kriss Vector Gen 1
RearSight.png Kriss Vector Gen 1
ADS.png Kriss Vector Gen 1
5.5Inch_barrel.obj Kriss Vector Gen 1
5.5Inch_barrel.stl Kriss Vector Gen 1
Bolt.obj Kriss Vector Gen 1
Bolt.stl Kriss Vector Gen 1
Bullet.obj Kriss Vector Gen 1
Bullet.stl Kriss Vector Gen 1
Charging handle.obj Kriss Vector Gen 1
Charging handle.stl Kriss Vector Gen 1
Front.obj Kriss Vector Gen 1
Front.stl Kriss Vector Gen 1
Lower receiver.obj Kriss Vector Gen 1
Lower receiver.stl Kriss Vector Gen 1
Mag.obj Kriss Vector Gen 1
Mag.stl Kriss Vector Gen 1
Rear.obj Kriss Vector Gen 1
Rear.stl Kriss Vector Gen 1
Stock pin.obj Kriss Vector Gen 1
Stock pin.stl Kriss Vector Gen 1
Top receiver.stl Kriss Vector Gen 1
Original Stock.stl Kriss Vector Gen 1
Original Stock.obj Kriss Vector Gen 1
9mmRound.obj Kriss Vector Gen 1
9mmRound.stl Kriss Vector Gen 1
Casing.obj Kriss Vector Gen 1
Casing.stl Kriss Vector Gen 1
Faire une offre
Partager
Ajouter Ă 
Make
?
Qualité de la création : 0/5 (0 votes)
Évaluation des membres sur l’imprimabilitĂ©, l’utilitĂ©, les dĂ©tails, etc.
Licence
Usages
Format du design 3D
31 fichiers (MTL, OBJ et STL) Fermer
  • 5.5Inch_barrel.obj 2.005998 × 2.005998 × 13.969995 mm
  • 5.5Inch_barrel.stl 2.005998 × 13.969995 × 2.005998 mm
  • 9mmRound.obj 0.9896210000000001 × 0.9912589999999994 × 2.9654529999999983 mm
  • 9mmRound.stl 0.9896210000000001 × 2.965454000000001 × 0.9912599999999987 mm
  • Bolt.mtl
  • Bolt.obj 2.145168 × 1.1111810000000002 × 5.554696 mm
  • Bolt.stl 2.145168 × 5.554696 × 1.1111810000000002 mm
  • Bullet.obj 0.91621 × 0.916479 × 1.4265599999999998 mm
  • Bullet.stl 0.91621 × 1.4265599999999998 × 0.916479 mm
  • Casing.obj 0.9896210000000001 × 0.9912589999999994 × 1.9158099999999987 mm
  • Casing.stl 0.9896210000000001 × 1.9158100000000005 × 0.9912599999999987 mm
  • Charging handle.obj 3.6891540000000003 × 1.556288 × 12.765986999999999 mm
  • Charging handle.stl 3.6891540000000003 × 12.765986999999999 × 1.556288 mm
  • Front.obj 2.870863 × 5.047887 × 3.137684 mm
  • Front.stl 2.870863 × 3.137684 × 5.047887 mm
  • FullBody.obj 6.159511999999999 × 18.036662 × 40.268301 mm
  • FullBody.stl 6.1595130000000005 × 40.268298 × 18.036662 mm
  • FullBodyWithStock.obj 6.160645000000001 × 18.074569999999998 × 62.222544 mm
  • FullBodyWithStock.stl 6.160645000000001 × 62.222543 × 18.074572 mm
  • Lower receiver.obj 4.599382 × 14.464418 × 28.011002 mm
  • Lower receiver.stl 4.599382 × 28.011002 × 14.464418 mm
  • Mag.obj 2.737906 × 26.026452 × 13.676701 mm
  • Mag.stl 2.737906 × 13.676701 × 26.026452 mm
  • Original Stock.obj 4.8038430000000005 × 17.297047 × 25.234650000000002 mm
  • Original Stock.stl 4.8038430000000005 × 25.234651000000003 × 17.297045 mm
  • Rear.obj 2.870863 × 4.937741 × 3.13767 mm
  • Rear.stl 2.870863 × 3.13767 × 4.937741 mm
  • Stock pin.obj 0.972644 × 4.086902 × 0.972653 mm
  • Stock pin.stl 0.972644 × 0.972653 × 4.086902 mm
  • Top receiver.obj 5.042136 × 17.813793 × 37.072361 mm
  • Top receiver.stl 5.042136 × 37.072361 × 17.813793 mm

En savoir plus sur les formats
Date de publication
Numéro du design 4032716
Auteurice du design DNTacticalArts
DNTacticalArts

DNTacticalArts

Vous rencontrez un souci avec ce design ? Signaler un problÚme.

Info sur le fichier 3D

Description du modĂšle 3D

The STL/OBJ files included are the following:

Barrel
9mm Round
Casing
Projectile
Bolt
Charging Handle
Front sight
Rear Sight
Upper receiver
Lower Receiver
Mag
Stock
Full body with stock
Full body no stock

The KRISS Vector Gen 1 with the 5.5-inch barrel is a compact and highly distinctive submachine gun platform. This STL/OBJ model accurately captures the Gen 1 Vector’s compact profile, short barrel configuration, and recognizable external features, with matched proportions and refined surface detailing inspired by the real firearm. Every major visual element has been modeled to preserve the platform’s unique character, delivering an authentic, display-accurate.

For best results, consider printing the parts separately using the provided STL/OBJ files, then assembling (using glue or any sort of adhesive) after cleanup and test-fitting.

If you have any issues, questions, or run into anything unexpected, please don’t hesitate to contact me.

Paramùtres d’impression 3D

You can use a 3D slicer program to break up the gun into multiple pieces and then glue those pieces together.

Page traduite par traduction automatique. Voir la version originale.

Catégories

Toutes les catĂ©gories â€ș Jeu â€ș Airsoft

Mots-clefs

Vous souhaitez soutenir Cults ?

Vous aimez Cults et vous avez envie de nous aider Ă  continuer l’aventure en toute indĂ©pendance ? Sachez que nous sommes une petite Ă©quipe de 4 personnes et qu’il est donc trĂšs simple de nous soutenir pour maintenir l’activitĂ© et crĂ©er les futurs dĂ©veloppements. Voici 3 solutions accessibles Ă  tous :

  • PUBLICITÉ : DĂ©sactivez votre bloqueur de publicitĂ©.
  • DON : Faire un don via Ko-Fi Faire un don
  • BOUCHE À OREILLE : Invitez vos amis Ă  venir dĂ©couvrir le site et les magnifiques fichiers 3D partagĂ©s par la communauté !

Partager et tĂ©lĂ©charger sur Cults3D c’est garantir que les designs restent bien entre les mains de la communautĂ© des makers ! Et non celles des gĂ©ants de l’impression 3D ou du software qui possĂšdent les plateformes concurrentes et qui exploitent les designs pour leurs propres intĂ©rĂȘts commerciaux.

Cults3D est un site indĂ©pendant et autofinancĂ© qui n’a de compte Ă  rendre Ă  aucun investisseur ou aucune marque. La quasi totalitĂ© des revenus du site sont reversĂ©s aux makers de la plateforme. Les contenus publiĂ©s sur le site servent uniquement les intĂ©rĂȘts de leurs auteurs et pas ceux des marques d’imprimantes 3D qui souhaitent aussi contrĂŽler le marchĂ© de la modĂ©lisation 3D.