DÉFENSEUR DE L'ESPACE ARTICULÉ (pas Astro Megazord) - AUCUN SUPPORT
?
- 30,9k vues
- 211 j’aimes
- 36 téléchargements
- 4 commentaires
Description du modèle 3D
Défenseur spatial entièrement articulé inspiré de l'Astro Megazord (Power Ranger dans l'espace) avec un nouveau design et non transformable.
DISCLAIMER :
Contient de petites pièces et nécessite une grande précision. Votre imprimante peut avoir besoin d'être correctement calibrée pour obtenir les meilleurs résultats.
Ce modèle est uniquement destiné à des fins de fan art. Le créateur n'est en aucun cas associé aux propriétaires de la licence originale des personnages de Power Rangers.
Sketch de Septian Mulana : https://www.instagram.com/septyan_mulana/
Modèle 3D par More Updates : https://www.instagram.com/toymakr3d/
Accessoires :
Bouclier
Arme à feu
Epée
Base de support
Aperçu vidéo complet : https://youtu.be/BhQSuWFWeYE
Comment installer un joint anti-décrochage : https://youtu.be/tGOLcspKhQw
-Avec l'Anti Loose Joint dans 14 points d'articulation & les joints peuvent être serrés.
-Full Color (détail sur le nom des fichiers)
-30 cm de haut
-Facile à imprimer
-Facile à redimensionner
-Aucun support
-Pas de vis
-Haute résolution
-Meilleure orientation de l'impression 3D pour un résultat de résistance maximale
-La tolérance des écarts est de 0 mm pour la rotule, 0,1 mm pour la cheville, 0,15 mm pour la vis.
Les outils dont vous avez besoin :
-Découpeur
-Super Glue
-Papier sablé
-Briquet
CONSEILS IMPORTANTS :
Utilisez du vernis à ongles pour resserrer les joints (goupille non anti-lâche) pour une utilisation à long terme.
Point d'articulation :
-Tête / cou
-Épaules articulées au corps (avec anti-lâche)
Articulation des épaules à la main (avec anti-décrochage)
Coude doublement articulé (avec anti-décrochage)
-Pivot du poignet
-Articulation individuelle des doigts
-Abdomen
-Taille pivotante
Hanches (avec anti-relâchement)
-Pivotement de la cuisse avec mouvement automorphe
Genou à double articulation (avec anti-décrochage)
Cheville (avec anti-détente)
-Orteil
Note : envoyez un courriel à toymakr3d@gmail.com si vous avez des erreurs. Merci et bonne lecture
Paramètres d’impression 3D
Buse : 0.4mm
Couche : 0.15mm
Filamen : PLA
Température : 195-205°C
Vitesse : 40/s
Peau/supérieur/inférieur : 0.8mm
Remplissage : 30%
Informations sur le fichier 3D
-
Format du design 3D : STL et ZIP Détails du dossier Fermer
- 10a_Sword1_GREY.stl
- 10b_Sword2_WHITE.stl
- 10c_Sword3_GREY.stl
- 11a_Gun1_GREY.stl
- 11b_Gun2_GREY.stl
- 11c_Gun3_WHITE.stl
- 11d_Gun4_WHITE.stl
- 12a_Shield1_BLUE.stl
- 12b_Shield2_GREY.stl
- 12c_Shield3_GREY.stl
- 13a_Standbase1.stl
- 13b_Standbase2.stl
- 13c_Standbase3.stl
- 13d_Standbase4.stl
- 13e_Standbase5Large.stl
- 13e_Standbase5Medium.stl
- 13e_Standbase5Small.stl
- 1a_Head_Top_WHITE.stl
- 1b_Head_Helmet_BLUE.stl
- 1c_Head_Face_GREY.stl
- 1d_Head_Eye_RED.stl
- 1e_Head_Neck_GREY.stl
- 2a_Body_Middle_GREY.stl
- 2b_Body_Back_BLUE.stl
- 2c_Body_FrontTop_BLUE.stl
- 2d_Body_FrontBottom_BLUE.stl
- 2e_Body_Chest_RED.stl
- 2f_Body_Abdomen_GREY.stl
- 2g_Body_ShoulderJoint_GREY.stl
- 2h_Body_Screw1_GREY.stl
- 3a_Waist_Main_BLUE.stl
- 3b_Waist_Bottom_GREY.stl
- 3c_Waist_Side_RED.stl
- 3d_Waist_Front_BLUE.stl
- 3e_Waist_BeltSide_WHITE.stl
- 3f_Waist_BeltCentre1_WHITE.stl
- 3g_Waist_BeltCentre2_YELLOW.stl
- 4a_Backpack1_BLUE.stl
- 4b_Backpack2_WHITE.stl
- 4c_Backpack3_GREY.stl
- 5a_Shoulder_Top_WHITE.stl
- 5b_Shoulder_Middle_BLUE.stl
- 5c_Shoulder_Joint_GREY.stl
- 5d_Shoulder_Front1_WHITE.stl
- 5e_Shoulder_Front2_GREY.stl
- 5f_Shoulder_Side_WHITE.stl
- 5g_Shoulder_Screw_GREY.stl
- 6a_Hand_Elbow1_WHITE.stl
- 6b_Hand_Elbow2_WHITE.stl
- 6c_Hand_ElbowScrew_WHITE.stl
- 6d_Hand_Main_BLUE.stl
- 6e_Hand_Side2_WHITE.stl
- 6f_Hand_Bottom_WHITE.stl
- 6g_Hand_FistLeft_BLUE.stl
- 6g_Hand_FistRight_BLUE.stl
- 6h_Hand_FingerLeft_WHITE.stl
- 6h_Hand_FingerRight_WHITE.stl
- 7a_Thigh_Hip_GREY.stl
- 7b_Thigh_Outer_WHITE.stl
- 7c_Thigh_Front_GREY.stl
- 7d_Thigh_Inside_GREY.stl
- 7e_Thigh_KneeTop_GREY.stl
- 7f_Thigh_KneeTop_Screw_GREY.stl
- 7g_Thigh_KneeMid_GREY.stl
- 7h_Thigh_KneeBottom_GREY.stl
- 7i_Thigh_KneeBottom_Screw_GREY.stl
- 7j_Thight_HipScrew_GREY.stl
- 8a_Leg_MainLeft_BLUE.stl
- 8a_Leg_MainRight_BLUE.stl
- 8b_Leg_Front1_WHITE.stl
- 8c_Leg_FrontTop_RED.stl
- 8d_Leg_Front1_GREY.stl
- 8e_Leg_FrontWing1_RED.stl
- 8f_Leg_FrontWing2_WHITE.stl
- 8g_Leg_SideStripe_GREY.stl
- 8h_Leg_AnkleBack_GREY.stl
- 8i_Leg_AnkleCover_BLUE.stl
- 8j_Leg_FrontBottom_RED.stl
- 8k_Leg_AnkleCannon1_GREY.stl
- 8l_Leg_AnkleCannon2_BLUE.stl
- 8m_Leg_AnkleSide_GREY.stl
- 8n_Leg_AnkleJoint_GREY.stl
- 9a_Foot_Main_BLUE.stl
- 9b_Foot_Toe1_BLUE.stl
- 9c_Foot_Toe2_WHITE.stl
- 9d_Foot_Thruster_GREY.stl
- 9e_Foot_SideWindow_GREY.stl
- 9f_Foot_Bottom_GREY.stl
- 9g_Foot_Screw_GREY .stl
- 9g_Foot_Screw_GREY.stl
- SpaceDefender_Instrution.zip
- TIPS_and_TRICKS.zip
- Dernière mise à jour : 2020-09-14 à 17h32
- Date de publication : 2019-10-04 à 19h26
Copyright
Mots-clefs
Créateur
Making toys for fun
https://www.toymakr3d.com/
Meilleures ventes de la catégorie Jeu
Vous souhaitez soutenir Cults ?
Vous aimez Cults et vous avez envie de nous aider à continuer l’aventure en toute indépendance ? Sachez que nous sommes une petite équipe de 3 personnes et qu’il est donc très simple de nous soutenir pour maintenir l’activité et créer les futurs développements. Voici 4 solutions accessibles à tous :
PUBLICITÉ : Désactivez votre bloqueur de publicité AdBlock et cliquez sur nos bannières publicitaires.
AFFILIATION : Réalisez vos achats en ligne en cliquant sur nos liens affiliés ici Amazon ou Aliexpress.
DON : Si vous voulez, vous avez la possibilité de nous faire un don via PayPal ici.
BOUCHE À OREILLE : Invitez vos amis à venir découvrir le site et les magnifiques fichiers 3D partagés par la communauté !
Ajouter un commentaire
4 commentaires