1:200 Gloster Meteor biplace

The Meteor also operated as a trainer and radar-equipped night fighter; the most common two-seater variants were the T-7 trainer and the NF-11, NF-12 and NF-14 night fighter variants (the NF-13 was virtually identical to the NF-11 differing only in its tropical equipment).

Variants: T7, NF11, NF12 and NF14.

200_Meteor_T7_00 clean
200_Meteor_T7_01 with ventral fuel tank
200_Meteor_T7_02 with ventral fuel tank + 2x100 gal. fuel tanks

200_Meteor_NF11_00 clean
200_Meteor_NF11_01 with ventral fuel tank
200_Meteor_NF11_02 with ventral fuel tank + 2x100 gal. fuel tanks

200_Meteor_NF12_00 clean
200_Meteor_NF12_01 with ventral fuel tank
200_Meteor_NF12_02 with ventral fuel tank + 2x100 gal. fuel tanks

200_Meteor_NF14_00 clean
200_Meteor_NF14_01 with ventral fuel tank
200_Meteor_NF14_02 with ventral fuel tank + 2x100 gal. fuel tanks

Models scale 1:200 made to be printed with a FDM with 0.2 nozzle at this scale.
For other scales use the following values into your slicer:

for 1:100 use 200%
for 1:144 use 139%
for 1:200 leave 100%
for 1:285 use 70%
for 1:300 use 66%

At 1:100 it can be used a FDM printer with a 0.4mm nozzle.
Under 1:200 is almost mandatory a resin printer.

print test 1:200 made with a FDM with 0.2mm extruder.

This creation is reserved exclusively for private and personal use; redistribution of these files, as they are or modified, is not permitted. For further details read the related section of Cults site by clicking on the (C) symbol below.

ciao

Enrico