Panther Ausf. G - Towing Cables FM25-010

FM25-010 Panther Ausf. G - Towing Cables (Complete Set)
Scale : 1/35

High-quality digital scale model detail set.
3D fichiers STL imprimables pour imprimantes SLA.

BASED ON 3D SCANS AND ORIGINAL TECHNICAL REFERENCES

SHORT DESCRIPTION :

This set upgrades the Panther Ausf. G towing cable setup with true wire-rope texture
(strand-by-strand detail), correct end fittings, and heavy-duty towing hardware.
Includes two cable sizes (small + full-length), rear hull cable holders, towing C-hook,
standard shackles, and Panther heavy tank shackles (open/closed + pin).

Print-friendly spool layout for easy, reliable printing on virtually any common
desktop SLA printer.
The cable can be briefly warmed (hot water or gentle heat) to become super flexible
for natural routing around details, then firms up when cooled to hold its shape.

INCLUDED CONTENT :

► Supported Files (recommended)

G1 32mm / 8.2m Towing Cable Full (Spiral) - Supported
G2 14mm / 15m Small Towing Cable (Spiral) - Supported
G3 FM25-010 Panther Towing Cable Accessories - Supported
G4 Bending Jig - Supported

► Unsupported Files (individual parts)

A - Small Tow Cable (14mm / 15m)
A1 14mm / 15m Small Towing Cable (Spiral)
A2 14mm / 15m Small Towing Cable Loop

B - Main Tow Cables (32mm / 8.2m)
B1 32mm / 8.2m Towing Cable Full (Spiral)
B2 32mm / 8.2m Towing Cable End Loop
B3 32mm / 8.2m Towing Cable Open End
B4 32mm / 8.2m Towing Cable Full (Straight)
B5 Rear Hull Towing Cable Holder (2x)

C - Towing Hardware
C1 Closed Shackle
C2 Open Shackle
C3 Shackle Pin
C4 Towing C-Hook
C5 Shackle with C-Hook

D - Panther Heavy Shackles + Tooling
D1 Bending Jig
D2 Panther Shackle Closed
D3 Panther Shackle Open
D3 Panther Shackle Pin

(Tous les fichiers sont organisés dans des dossiers clairement étiquetés : supported / unsupported.)

COMPATIBILITY :

Fits all common Panther Ausf. G kits, including :
- Das Werk
- Takom
- Border Model
- Other compatible Panther Ausf. G kits

Minor adaptation may be required depending on manufacturer tolerances.

LICENSE INFORMATION :

These files are licensed for personal, non-commercial use only.

NOT PERMITTED :
- Sharing or redistribution of the files
- Reselling or gifting of digital files
- Selling physical prints
- Resin casting or any form of reproduction

These files may be used for personal, non-commercial projects only.
Le partage, la distribution ou la revente des fichiers sous quelque forme que ce soit (numérique ou physique) est interdit.
Ceci inclut également la distribution/vente d'impressions 3D et toute méthode de reproduction telle que le moulage en résine.

Pour les options de licence commerciale, veuillez me contacter.

Copyright Faustus Models
by Tom Theunissen
© Faustus Models 2026

Copyright © Faustus Models 2026
by Tom Theunissen
Tous droits réservés

3D PRINT INFORMATION :

► Baseline Printing Specs (reference values)

Layer Height : 0.02-0.04 mm
Normal Exposure : ~2.2-2.8 s
Bottom Exposure : ~30-40 s
Anti-Aliasing : Off
Resin : Standard grey or similar opaque resin recommended

(Reference printer : MSLA class - results may vary depending on printer, resin,
and calibration)

► Important Printing Notes

• SLA printing is not plug-and-play.
• Dimensional accuracy heavily on :
  • Printer calibration
  • Resin shrinkage
  • Exposure tuning
• Transparent / clear resins require significantly lower exposure times. Using standard exposure settings with clear resin may cause :
  • Closed pin holes
  • Oversized snap features
  • Loss of functional tolerances

Unsupported files are recommended for advanced users who want full control over
orientation and supports.

POST-PROCESSING & HANDLING :

• Retirer les supports avec précaution à l'aide de cutters ou d'un couteau de bricolage tranchant
• Chauffer les supports si nécessaire (eau chaude ou sèche-cheveux - faible chaleur)
• Nettoyer soigneusement les pièces et les post-traiter correctement
• Un léger sablage ou un léger nettoyage peut être nécessaire
• Appliquer une couche de fond standard avant de peindre.