Boeing 737 Glarewings - Edition STL uniquement

A simpler, more affordable option for builders who just want to download, print, and install.
This STL‑only version of the 737 glarewings brings the same smooth, flowing compound curves and full‑depth glareshield profile without the added cost of including CAD source files. Perfect for sim builders who simply want high‑quality, ready‑to‑print models.

What You Get

3D‑print‑ready STL files for the full v7 glarewing set
Eight hollow, sectioned parts per side for faster printing and reduced PLA usage
Integrated warning‑panel cutouts exactly where you need them
Designed for easy assembly with M4 × 14 mm countersunk screws (upper section intended to be glued)

Features
Smooth, flowing geometry
Beautiful compound curves add an instantly more realistic, polished aesthetic to your cockpit build.
Print‑efficient design
Each section is hollow to minimise both filament consumption and print time, making it ideal for larger printers like the Creality CR‑10.
Rigid final assembly
When fastened and bonded as intended, the completed glarewing is strong, sturdy, and flight‑deck ready.
Flexible mounting
The base features 8 mm bolt holes, providing multiple installation options for different cockpit frames.

Compatibility

Not compatible with earlier Dual Seat or Single Seat glarewing versions.
These v7 glarewings use the full‑depth glareshield profile and are not cross‑compatible with previous builds. These were designed for a Patreon using cockpitsimparts MIPs and their dimensions.

If you need to fit your older warning packs to the v7 glarewing design, use this mod:
https://www.737diysim.com/post/glareshield-warning-pack-mod

Ideal For

Home cockpit builders
Boeing 737 sim enthusiasts
Makers who prefer plug‑and‑print STL packs
Users who don’t require CAD editing or customisation

Printing Recommendations
For best results:

0.4 mm nozzle, 0.20 mm layer height (cleanest surface finish)
10% infill
PLA recommended

For faster, rougher prints:

0.8 mm nozzle (expect approx. 5 days per side and around 2 rolls of PLA per side)
Approx. 1.8 kg final weight per side