Duffman (Simpsons) MultiColor

Important: This model requires a multi-color printing setup to achieve the fine details. Included in this package are pre-colored, ready-to-print profiles for both Bambu and Snapmaker machines, making the printing process simple and straightforward.

I recommend the Snapmaker U1 3D printer as that is the printer I used for this model. If you are planning to purchase one you can get 5% off using my referral link. Make sure to click the link below and enter PLAY_CO during checkout so the discount is applied.

Purchase the Snapmaker U1 3D printer and save 5% click here!

https://us.snapmaker.com/?ref=play_co

Get ready to bring Springfield’s most over-the-top mascot to your collection with Duff Man! Bursting with energy, confidence, and plenty of "Oh Yeah!" attitude, this iconic party legend is ready to stand proudly on your shelf. Whether you're a longtime Simpsons fan or just love memorable cartoon characters, Duff Man is sure to add some fun and excitement to your display.

Dimensions:

At 100% scale, Duff Man stands approximately 9.25 inches (235mm). Scaling up should work fine, but scaling down may tighten tolerances and make the multi color parts less detailed.

Colors Used:

Bambu Basic: White, Black, Red
Bambu Matte: Sky Blue, Lemon Yellow
Bambu Silk+: Silver
Esun - ePLA Matte: Almond Yellow (For his hair)

Print Profile:
Two print profiles are included, one for Bambu printers and one for Snapmaker printers.

All multi-color parts shown in the photos were printed using the Snapmaker U1.

Below is a breakdown of the multi-color parts for a standard Bambu AMS system and the Snapmaker multi-tool changer.

Bambu P1S/P2S (AMS)

Head: 7Hr 36m. Filament used 126g

Chest: 8Hr 10m. Filament used 182g

Boots (L&R): 3Hr 34m. Filament used 103g

Hat: 3Hr 25m. Filament used used 70g

Keg: 7Hr 6m. Filament used 160g

Beers (5): 3Hr 41m. Filament used 73g

Snapmaker U1 (Tool Changer)

Head: 1Hr 57m. Filament used 35g

Chest: 2Hr 23m. Filament used 51g

Boots (L&R): 2Hr 5m. Filament used 59g

Hat: 54m. Filament used used 16g

Keg: 2Hr 16m. Filament used 53g

Beers (5): 1Hr 12m. Filament used 16g

Assembly Tips:
Attach the cape first before attaching the head.

Assembly Steps:
Attach the legs to the trunks.

Attach the chest to the trunks.

Attach the arms to the chest, followed by the hands.

Attach the cape to the body, then attach the head.

Attach the hat to the head, then place the sunglasses on.

Attach each beer clip to his belt (cut edge faces down), then snap on the beers. (Optional: Glue the beers to the clips for a fully secure fit, or leave them snapped in or remove to show them off.)

Add the keg top to the keg to complete the entire model.

You’ve brought the legendary, high-energy party hero to life! From his signature trunks and heroic cape to his cool sunglasses and detailed beer belt, he perfectly captures the unforgettable look of everyone’s favorite animated hype man. Ready to bring pure, unadulterated energy to your display, he is sure to stand out in any collection. Thank you for printing this model and for supporting Playco Fusion. We’d love to see your finished print, so be sure to share your photos!