Ir al contenido

Actualización de Garras de Dragón Articulado 2.0.

Descripción del modelo 3D

Garras de Dragón completamente articuladas 2.0 actualizadas para un mejor ajuste, ¡¡¡nuevo look!!! El dedo 2.0 de 3 nudillos y el pulgar 2.0 de nuevo... deberían caber en los dedos de la mayoría de la gente. Pero no hay garantías.

También puedes usar espuma pegajosa en el interior para reducir el diámetro del agujero. O pegar un guante en el interior para sostenerlo mejor en la mano.

En cuanto al montaje, yo proveí. Unas cuantas fotos para ayudar a guiarte. Este modelo puede ser ensamblado con alfileres impresos en 3D.

Parámetros de impresión 3D

Los modelos se dividen por la mitad. Y listo para ser impreso. Necesitarás apoyo. Y al menos un 20% de relleno. Recomiendo la triple pared. Para tener fuerza, pero no es necesario.

  • Formato de archivo 3D : STL

Palabras-clave

Creador

Designs 60
Descargadas 6386
Seguidores

Boring 9 to 5 job by day. Self-taught3D artist by night. I love to create fun and challenging( for me) 3D models In my free time to share with the world.
If you happen to download one of my models, please share a picture of make with me.

Copyright

©

Página traducida por traducción automática. Ver la versión original.


Los más vendidos de la categoría Variado


Añadir un comentario

27 comentarios

Hello Alisea969
A good place to start is to figure out which style you like to print out. I have the different styles labeled in the picture above the original is just labeled fingers because that is the first one I designed. The 2.0 labeled ones have textured skins. From there and move on to the fact that if you have the ability to print a full plate I would strongly suggest you do this. The full plates are set up the correct orientation along with the fact if you need to scale for your fingers which I recommend. I would probably scale them down to 80% for a good starting position I have very large fingers and they were made for me. I would also add supports and a Brim. As far as how to assemble them they are basically the same parts that I used in my bone fingers which you can find an assembly video on my Instagram which will guide you in assembling them. If you need further help please don't hesitate to email me directly. Littletupp@gmail.com

hello; I have buied this stl, but don't understand what should I print and the build after printing, can you help me plz ? thanks

Yes it's steampunk versions in the works.

Hello, this is awesome, I printed it, scaling it to feet my finger, it look so cool.

Do you think you can make a bio-meca/steampunk version with some gears, pipe... ?

ALZORL Please see the third picture below the main picture to see the different styles .The originals fingers are labeled just finger or thumb because they were the first files uploaded. sorry for the confusion . But the rest should be labeled according to the picture. hope this helps.

Looking at the files, it's very confusing on which fingers are which. None of them are labeled which finger they are except for the thumb. So how do I know which files to print for which fingers, assuming I don't want to do the 2.0 versions?

I just bought this looks amazing but what files are just for the original files

Hi SKAMPP thanks for downloading. To help you out with assembling. They assemble the same way as the bone fingers you can check out the numbered step diagram under bone fingers and just apply to the dragon fingers. I hope that helps also when printing the finer Parts I find it's always better to use a Brim accompanied by supports helps hold the finer stuff in position on a delegate printing I usually use a 4 millimeter Brim with concentric or zigzag supports. Hopefully that will cut down on the failure rate. Happy printing

These are very cool! For under $7 I got an amazing design and a logic puzzle too! A little puzzling to start with on figuring how to put them together. Also the finger and thumb split base is the single most difficult thing I've ever tried to print, honestly, I get one good print out of three attempts. BUT IT'S WORTH IT!!! Thanks LittleTup!

Downloaded the file, it is damaged,can you send a working file?

Just finished printing a 2.0 thumb, cant wait, gonna be a lot of printing for 2 hands worth!

also another idea you should edit it and put a variety of sizes from kids to literally big handed adults

just a idea this would be a great start to working on assistive prosthetics , though i do not have a medical license because i spend my recreation in 3dprinting and shooting targets as a way to relax in peace without bothering anyone

I recommend printing a full plate setups they have all the parts you need for each finger. Also there's diagram pictures of assembly under my bone fingers you could use for reference. Any further difficulties please email me directly so I can help.

hi there !! First off i want to Thank you For what looks to be an awesome accessory to my cosplay hobby but i have one slight quibble,
In the description it states ....." As for assembly I provided. A few pictures to help guide you."..... could you please tell me how to make them visible as i cant see jack !! and im lost as F.....! without any instructions....
ive just paid 7 quid for a lot of stls which looks like one hell of a jigsaw puzzle!! and ta try put this togetha without any instructions is a bit of a bummer dude :( could you put up some pics to help ...:: ALSO FOLLOWING!! ;)

Sorry they're meant to be one size only. You could try scaling them down but remember the arms and pins would have to be scaled down to and I'm sure there's only a certain amount you can go before failure of the mechanical parts. That's why I suggested downsizing the holes to fit your fingers with a sticky foam in layers on the inside please check the pictures above.

how do i scale them for my hand? is there any instructions?

Check out my bone fingers it has a full diagram. same rules apply.

an assembly diagram would be super helpful or an exploded view so there is a tad more detail to put it together.

The longest print piece are 111mm x43 mm x 36mm . All the pre-configured full bed plates files are made to fit on a 220 mm x 220mm bed with a little room to spare. I hope that helps CAPTAINSTEAMFOX

How wide are the prints? I don't want to buy this super cool looking print and find out that my printer is too small to make it.

I designed The first one the three knuckle finger with . 2 mm in mind for a faster print. Seeing how people are going to print out. Five or ten of these . Also the dragon skin update 2 knuckle. Looks cleaner at .1mm.

What layer height resolution did you design this for? .1mm, .2mm? curious

It's there in the download; you may have to download it again to get the most up-to-date zip file, but in the one I grabbed there's "Dragon Skin Full Plate a.stl"
Print it five times and you've got a dragon hand :D

Also, it says Dragon Skin update, but there is no Dragon Skin version in the download.

I just bought this. Looks great, but I noticed only split versions of the files are included. I would like to print it on a resin printer for better detail and flexibility. Any chance of getting the uncut versions of the pieces?


¿Te gustaría apoyar Cults?

¿Te gustan Cults y quieres ayudarnos a continuar la aventura de forma independiente? Tenga en cuenta que somos un equipo pequeño de 3 personas, por lo que es muy sencillo apoyarnos para mantener la actividad y crear futuros desarrollos. Aquí hay 4 soluciones accesibles para todos:

  • PUBLICIDAD: Deshabilite su bloque de anuncios AdBlock y haga clic en nuestros banners.

  • AFILIACIÓN: Haga sus compras en línea haciendo clic en nuestros enlaces de afiliados aquí Amazon, Gearbest, Banggood, Aliexpress o Ebay.

  • DONACIÓN: Si lo desea, puede hacer una donación a través de PayPal aquí.

  • PALABRA DE BOCA: Invita a tus amigos a venir, descubre la plataforma y los magníficos archivos 3D compartidos por la comunidad!