Ir al contenido

Dedo del Hueso Actualizado

Calidad de creación: 4,3/5 (49 votos)
Evaluación de los miembros: imprimibilidad, utilidad, detalles, etc.
  • 134,6k vista
  • 896 me gusta
  • 1,2k descargas

Descripción del modelo 3D

Actualizado con un nuevo dedo más largo de tres nudillos. También tiene paredes laterales más delgadas en la base. Así que cabe entre los dedos un poco mejor. Ahora puedes imprimir cuatro de estos dedos más largos. Y usar el original como pulgar. Sólo hay un tamaño de dedo para cada estilo de nudillo. Debes imprimir varias veces... Encuentro que usar espuma adhesiva en el interior para dimensionar los dedos ayuda. Los agujeros de los dedos están sobredimensionados. Por lo que debería encajar en la mayoría de la gente, pero no hay garantías. Lo siento ... Todos los modelos están divididos por la mitad para facilitar la impresión. Deben ser pegados juntos. Enlace al vídeo de montaje

Parámetros de impresión 3D

Imprimí en un punto 1. En un punto 2 de altura de la capa con un 25% de relleno. Utilizo el ala no necesaria dependiendo de lo bien que se adhiera a la cama. Pero sí recomiendo los soportes..

  • Formato de archivo 3D: STL
  • Última actualización: 2020/06/15 03:07
  • Fecha de publicación: 2020/02/10 05:09





Boring 9 to 5 job by day. Self-taught3D artist by night. I love to create fun and challenging( for me) 3D models In my free time to share with the world.
If you happen to download one of my models, please share a picture of make with me.

Página traducida por traducción automática. Ver la versión original.
¿Tienes algún defecto en este diseño? Advertir de una problema

Makes hechos por la comunidad

Los más vendidos de la categoría Artilugios

Añadir un comentario

35 comentarios

I'd like to try and print this in fewer parts on my resin printer. Can you add the half's as an unsplit piece? That way I can hollow it out and reduce the weight.

  • 1 me gusta

Some people have told me they used to used a large diameter weed wacker string to join the fingers together on resin models. I have not personally tried this, but in theory it sounds like it would work I hope this helps

Any suggestions for pin replacement on resin printer? Resin doesn't melt like filament, so you can't flatten out the ends with a lighter

I just purchased this and printed the first full finger. Great work!
I looked through some of the comments and saw that a while ago, people were inquiring about a back plate and you responded that you were working on something for it. Any chance you know when this will be available? Very interested in getting this to add more stability. Thanks!

Will you be adding the updated finger part to all you hand designs?

On most things I use an enamel primer first coat. That usually let's just about anything that I paint on after work stick

What paints work well on your prints? I'm finding that some don't adhere very well to the PLA... Any help is much appreciated. Your work is beautiful!

Can you provide in .gcode format?

Hi Mushee
This is the first time I've heard that someone was unable to print them properly. If you would like to email directly could help you troubleshoot if you like. Good bed adhesion is key that's why I prefer brims and supports also the full plate set up by provided are the best orientation where the parts to fit together correctly. I orientated the plates so if peoples printers are not calibrated they will fit together anyway. I hope some of these tips helped and if not Please email me and I'll help in any way I can thank you.

Bought these and never got them to print properly..

please make a video of assembly

If anyone is making these to sale hit me up I'm looking to get a set

These have been one of my favorite 3d printed thing. If the assembly is making you think twice - don't - it's actually really easy.

Do you ever make them to sale ?

I just purchased these and was wondering if I can get the original 2 knuckle design as it fits more with my costume design. Sent you a message about it. Thank you

Bought and printed, can't wait for the backplate to stabilize the base knuckles.

@Gerhard: There's a part list and instructional walkthrough in the images above.

aaaaand bought. :-D Can you explain me the part names? how many times do i need to print a part for a 3 knuckle finger? A part list would be nice or a number in the file name like "3 knuc bone mid1_3x-stl" or so.

I will try and get it out this weekend thanks guys appreciate it

ill wait for the backplate, too :-D Great Work

Standing by for the back plate. Love your work.

Is there a thumb V2 like with the dragon set?

I'm working on it currently I'm just printing the the back hand of the Dragon claw 2.0

Awesome print.
You wouldn't happen to have something for the back of the hand?

Printing the bars at 1.5mm thickness made the finger operate much more smoothly and easily.

Now to endure the long slog to print out the pieces for the other five.

Abumaia, I had the same problem, sanding the inside part of the fingers solved this. Also, the base part has to be tight on your fingers, if it's wobbly it makes extending the fingers much harder

I just successfully finished my first 3-knuckle finger. Flexing it is no problem, but I find it is rather tight and stiff when trying to re-extend it. I'm afraid my finger muscles are stronger in the gripping direction, not so much in the opening direction. I'm thinking of reprinting the two bars to be a little thinner, so they don't rub so much on the inside of the finger sections.

Hi Driagan
First thank you for downloading them I'm glad you like them. Yes I'll see what I can do about making a regular bone finger tip option in the future. As far as resizing the holes I found that the 1.75 filament is kind of the breaking point on the joints and raising the diameter a little bit along with printing them strengthen them up. And lastly as far as the holes on the bottom of the fingers the three knuckle updated version of the finger already has the holes. The two knuckle version does not have the holes maybe I will see what I can do about going in and slimming it down to better fit in between the fingers and adding a hole. I do also recommend using one-sided stick foam layered on the inside to better form to your fingers. I am so thankful to everyone in the community for downloading these and I hope you enjoy them as much as I have!

These look great, but I have three requests:
1. As someone else said, could the model use 1.75mm holes so that we can just use filament instead of having to print pins?
2. Could you also create human finger bone tips that could be used in place of the claw tips?
3. Could you add holes to the top back of the fingers that could be attached to a wristband with string or something to prevent the fingers from falling/sliding off?

Could you also upload the uncut files? Thanks

Any chance the model can be modified so the holes for the pins are 1.75mm so a section of filament can be used instead of printing pins?

can you post an assembly diagram or something?

Hey, thanks for making this!
I just downloaded the STLs, do you have a readme file that explains which parts to print?
For example when would I use mid1 vs mid2? What are all the parts I would need to make one 3 knuckle finger?

Hi blastin
It should . The longest piece is 111 millimeters. But I haven't tried it on my Photon yet due to the fact. The pins are set up to be made out of. PLA OR ABS. And have to be melted. To make like a riveting system to hold the finger together. You would have to come up with another solution. To put it together.

would the individual sections fit on an Ancubic Photon s Resin printer?

¿Te gustaría apoyar Cults?

¿Te gustan Cults y quieres ayudarnos a continuar la aventura de forma independiente? Tenga en cuenta que somos un equipo pequeño de 3 personas, por lo que es muy sencillo apoyarnos para mantener la actividad y crear futuros desarrollos. Aquí hay 4 soluciones accesibles para todos:

  • PUBLICIDAD: Deshabilite su bloque de anuncios AdBlock y haga clic en nuestros banners.

  • AFILIACIÓN: Haga sus compras en línea haciendo clic en nuestros enlaces de afiliados aquí Amazon o Aliexpress.

  • DONACIÓN: Si lo desea, puede hacer una donación a través de PayPal aquí.

  • PALABRA DE BOCA: Invita a tus amigos a venir, descubre la plataforma y los magníficos archivos 3D compartidos por la comunidad!