895 Kommentare

Hi! I can't believe no one noticed this in 6 years, not even myself 😂. I just fixed the file and improved the multicolor version. Thanks for the heads up 😉

Hey! Thanks for such a quick update. I don't think I noticed before because I was using a Kobra with manual levelling, and bambus are auto levelled.

Hi Martin! Not sure what you mean by "i have broken slices". Also, you didn't mention which design are you having the issue with. Please let me know and I'll try to help 😉

Hi I've just bought your Armadillo. I've first printed the normal version. In the first layers on the butt part there was only half the side printed. In the XXL version I have 2mm of the head and then a gap of 5mm. the rest is printed ok. Unfortunately I can't send a picture.
When I check the slices on my printer I see that there are parts missing in some of the slices.

You can send me the pictures to mcgybeer@gmail.com if you want. That will make easier to understand the issue

Hi! For Commercial Licensing please check the info on my website: https://www.mcgybeer.xyz/commercial-license

Hi! There are several files, including a version to be printed by parts (probably the one you used). Check the folders "Spiral" and "Straight", those have the assembled files 😉

Hi! For Commercial Licensing please check the info on my website: https://www.mcgybeer.xyz/commercial-license. For Russia, you can find a link to Boosty with everything already translated: https://boosty.to/corntoys

Thanks! Good luck with your projects!

Yes, it is. Thanks a lot for your concern, I just reported it 😉

Hi! Yes, it seems like something went wrong with the file or the slicer. I would try loading the STL again on a new project, that should work. If you bought the model then you can download the files as many times as you want 😉

Thanks! I tried it again with your 3mf file which I downloaded (didn't realize it was there the first time) and it did the same thing, but at a different stage. Do you have any other suggestions on how to make it work? Thank you so much!!!

Hi! I've been thinking about it, and the only time I've seen a similar issue was years ago. The SD card of my printer was malfunctioning, and the print randomly stopped. Is it happening with any other long prints?

Thanks for writing back! No I've never had it with any of my prints, even the 7 hour ones. It doesn't have an SD just sent through wi-fi. Thanks for brainstorming!

Hi do you have any other solutions? My son really wants to print it.

Could you check that there's not a pause in the file?

Hi! STL files can't contain pauses or other settings, it's just the mesh. I've checked the file, and it looks the same as always. And, if you added a pause by accident, it should be visible in the slicer preview. I still don't understand what could be happening. What slicer are you using? You can send me your 3MF and gcode files to mcgybeer@gmail.com and I will take a look 😉

Hi! Yes, no other concerns besides scaling. I don't recommend going too small, because there are tiny articulations that might break. No supports needed, just ignore the warning. Anyway, be sure to check the slicer preview to check everything looks fine. For Bambu Studio, basically what you see is what you get 😉

for some reason there is a pause on layer 25 on mine, is that supposed to be there?

No, I don't think so. I'll check the file just in case I accidentally added it (it won't be the first time). You can remove it

You were right, depending on the slicer there is a pause that shouldn't be there. I've just updated the file. Sorry for the inconvenience

Hi! Thanks for asking. Yes, if you subscribe to the commercial license on Boosty you will get an authorized seller badge and you will have permission to sell prints of my designs 😉

Even the lizard?

Yes, all my designs 😁

ok nice.

Hi! That version is still Patreon exclusive because it's an ongoing project: https://www.patreon.com/posts/modular-dragon-120528887

Hi! For Commercial Licensing please check the info on my website: https://www.mcgybeer.xyz/commercial-license
Have a nice day!

Hi! I'm sorry, I don't have time for commission designs 😅. Thanks for asking

Hi! Yes, the Commercial License is available on Boosty: https://boosty.to/corntoys

Thank you, I will buy in the future

Hi! Be sure you have logged in with the correct user. Many people have multiple accounts without knowing it 😂
If it still doesn't show up, please reach Cults3D staff

Thank you - You were my first download on this site - using different user :) Cat Dog & Ladybird - all excellent files - thank you

Hi! For Commercial Licensing please check the info on my website: https://www.mcgybeer.xyz/commercial-license

If I subscribe to the patreon, do I still need to buy it off of cult or is it part of the patreon page where I can download it?

Hi! Some are included, and some aren't. The latest releases are always available, and a bunch of additional stuff as well. Here you can see an updated list of designs included: https://www.patreon.com/posts/download-hall-106243248

Hi! I have no idea which file is "Requin_vX_A.stl". I think that's from another designer maybe?

I have the same issue with https://cults3d.com/en/3d-model/game/snake-and-rattlesnake

Hi! That never happened before, so if it failed twice in a row I think it should be a server issue. The download also fails for me. Let me contact the staff and hopefully they will solve the issue soon 😉

Hi! I tried deleting the cookies and the downloads now work for me! Can you try that?

Yes! Deleting cookies did the trick! It’s printing now. Thanks so much.