Zum Inhalt gehen

Achtung, liebe Freunde, es handelt sich nicht um einen privaten Nachrichtendienst, sondern um einen öffentlichen Diskussionsthread. Dies ist ein Ort des Austausches. Bitte bleibt höflich und respektvoll. Jegliche kommerziellen oder gehässigen Beiträge werden gelöscht. Wenn Sie ein bestimmtes Design erwähnen, fügen Sie bitte den Link oder den Titel des Designs in Ihrer Nachricht hinzu, damit die Konversation richtig geleitet werden kann. Wenn Sie Ihrem Beitrag Fotos beifügen möchten, können Sie Ihre Bilder bei einem kostenlosen Online-Bilder-Hosting-Dienst wie Imgbb hochladen und die Links zu den Bildern in Ihren Kommentar kopieren/einfügen. Viel Spaß beim Diskutieren!

Schreibe deine Nachricht:

37 Kommentare

Hey - I bought your anubis sculpture to print and I dont think it is set up well for printing. The scarab in the base is extruded all the way through from the bottom to the top and it has walls it does not need. The model itself has a few issues like this all around where things should be filled in so that they will have "infill" when printing vs bring printed as shells. I have yet to get a good print out of this file despite having my printer fully calibrated and being able to print many other things. For reference, Im using a delta printer

I'm typing mono X. and there have never been any problems with printing.

photopolymer printers print this model in the specified size of 130 mm without any problems

Yea, it sounds like you are using a resin printer which is very different than a Delta or Cartisian printer - I dont think this will work with a delta or cartisian without some work on the model. You should probably specify this on the model so that others dont make the same mistake I did.

The figure itself is beautiful, this is not a critique on your art, it just doesnt work for a non-photopolymer printer.

if there are questions, they are asked before buying!)))))))))

I will always answer

the listing says "ready for 3d printing" so the assumption would be that it is ready to print - if you are using a specific method you should list that it should not be on the customer to know that its NOT for a certain type of printer. Can you refund this order please?

there are many varieties of printers . the print quality directly depends on the quality of your printer . specify the problem in the model?

To get a refund, you need to contact support. your payment was not transferred to me! for all the time that I am on this site. You are the first one who cannot print my model. as I said, print quality directly depends on the quality of the printer. this model is tricky and old printers printed on plastic might not be up to the task..

Hey hey no worries I can do that. Thanks for the quick responses. I thing listing this is not made for FSD printers and that you are using an SLA would go a long way to help future people that print. This isnt a question of printer or plastic quality it is that a lot of the forms are just "shells" so there is no "infill" which for FDM printers use. For reference Im using the one of the most popular FDM delta printers on the market made by FLSUN , its just a different process than your SLA resin printer uses

I print models both full and empty. how to set up my slicer.

The STL does not contain the data for these to be full , or at least the way an FDM slicer works vs. an SLA - Again I think that is where the differences are https://formlabs.com/blog/fdm-vs-sla-compare-types-of-3d-printers/

how long have you been printing on the printer? experience

Im trying to help here, and I've done a decent job of explaining why the model doesnt translate well to FDM. Take it or leave it. :D have a wonderful day !

Hello,

For the BODY BUILDER model. What settings would you recommend to print it successfully?

Thank You

I print with a photopolymer. the settings are optimal for your printer

Bonjour je viens d'acheter le fichier d'un bodybuilder avec une chaine, le fichier ne s'ouvre sous aucun logiciel que faire

Okay I'll check it out now

do you have this model without the number so i can add different numbers my self?

which model?

Hey do you think it would be possible to print the mcgregor bust bigger than 160mm while preserving the quality?

200мм yes

Hey Man on that Jax Statue I didn't get the Combined Figuring file. I just got the individual parts.

  • 1 Like

I'll check the files now

hi i Purchased your gorilla power lifter and was curious what slicing settings you recommend for it and do i print it the way it shows when loaded in cura or do i need to rotate them to any specific degree?

hello. I print with photopolymer photon mono X. each model should be positioned according to their experience in printing!... the file is ready to print immediately. I have a lot of experience in 3d models for printing!))

Hola! Al comprar uno de tus modelos, podría utilizar la impresión para uso comercial?

el modelo de shao kahn busto , en que medida se puedo agrandar ?

Larisa
write me on instagram

Hi i'm Larisa ( La-reese-a) I am in the 8th grade and wanted to use this design for a school project and i can't buy it because the computers belong to the school, so we can only use our e-mails given to us by the school. so really is there a way that i could get the design as a STL or CAD. thank you for reading my message. It is perfectly fine if you don't want to help out with this project. Thank you for your time and enjoy the rest of your day.

  • 1 Like

Hi i'm Larisa ( La-reese-a) I am in the 8th grade and wanted to use this design for a school project and i can't buy it because the computers belong to the school, so we can only use our e-mails given to us by the school. so really is there a way that i could get the design as a STL or CAD. thank you for reading my message. It is perfectly fine if you don't want to help out with this project. Thank you for your time and enjoy the rest of your day.

hi just downloaded the voilator clown file and there is no model in the file. any help would be helpful thanks.alan

hello.from a figurine?

hi my friend, i would like to buy the STL file, FROM THE HEAD OF JON JONES. YOU SELL? WHAT VALUE?

perhaps in the future

first of all congratulate him for being an artist, his models have me crazy, I have all of the ufc and my question is regarding that: will he take more mini models of fighters ?? I cross my fingers to see on your page Francis N'gannou, Adesanya, Daniel Cormier, Yoel Romero and a long etc. a greeting and take care

strange! I'll figure it out now!

i purchased hulk teacher 3d file from you and theres nothing on the file

HOLA BUENAS TARDES AYER LE COMPRE EL DISEÑO PERO UNO DE ELLOS ESTABA ROTO PODRIA PASARME DE NUEVO EL DISEÑO DEL MUÑECO CON EL CINTURON POR FAVOR QUE ME SALE COMO K ESTA ROTO Y NO ME DEJA ABRIRLO

HOLA BUENAS TARDES AYER LE COMPRE EL DISEÑO DE MCGREGOR Y UNO DE LOS DISEÑOS ESTA ROTO NO ME DEJA ABRIRLO NECESITO EL DISEÑO QUE TIENE EL CINTO ME PODRIAS PASAR EL DISEÑO DE EL CON EL CINTURON

Bonjour
Merci pour le suivi
Cordialement

hi. zbrush