Can you tell me the printing settings for Peek material ?
👋 Hallo zusammen! Dieser Thread ist öffentlich, also lasst es uns nett und respektvoll halten. Keine Werbung, kein Spam oder unangenehme Dinge!
🇸🇮 Benutzerland: Slowenien
🌐 Bevorzugte Sprache des Mitglieds: Englisch. Sie können online über DeepL übersetzen.
💡 Beziehen Sie sich auf ein bestimmtes Modell? Fügen Sie den Link, den Titel oder die Modellnummer hinzu.
🖼️ Möchten Sie Fotos einstellen? Verwenden Sie einen kostenlosen Host wie ImgBB und fügen Sie die Links in die Nachricht ein.
✍️ Schreibtipps: Verwenden Sie das Markdown-Format, um Ihre Texte zu strukturieren und lesbarer zu machen.
Schreibe deine Nachricht:
18 Kommentare
Unfortunately, I can't print with PEEK on my 3D printer, so I don't have any personal experience with this material or specific recommended settings.
From what I have found, typical basic PEEK printing settings are approximately:
- Nozzle temperature: 380–400 °C
- Bed temperature: 140–160 °C
- Heated chamber: ideally 120–180 °C
- Cooling fan: usually off
However, these settings can vary depending on the PEEK filament manufacturer and the printer being used. I recommend checking the filament manufacturer's recommendations or searching Google for the specific PEEK material you are using.
- 0 likes
Hi BOFL I purchased the water device, nice work! I wanted to see if it'd be possible to get the step file? I wanted to tighten the tunnels so I can adapt to my very slow flowing RO system?
- 0 likes
Concerning the water imploder, does this fit 3/4 GHT? If not do you have a modified version? Thank you for your time and efforts!
- 0 likes
I have only 1/2
- 0 likes
Hello! Do you accept modified requests for your models?
- 0 likes
Thanks. I brought the 3D model to a company which is specialiized in 3D printing.
There are 2 water imploders inside the archive - big and small. They said that their software found many errors in the small one and they can try to fix them but there is no guarantee that this will work.
So I told them to make only the big one. They recommended to use SLS as material and I agreed.
Today I paid and received the water imploder but something is wrong - looks like channels are not passing all the way from inlet to outlet -
I tried to blow it by mouth and it looks like there is plug on the other side.
Kindly ask for your comments / suggestions.
- 0 likes
hello,
I have now saved the smaller water imploder as OBJ. Send me your email address and I will send you the download link.
I don't see any problems with the large imploder. They probably used supports during printing that blocked the holes. The supports should only be in the middle, one small hole, nothing else
- 0 likes
Thanks again! My email is rdhristov@gmail.com
- 0 likes
If you have option ABS, then use ABS
- 0 likes
I just want to ask what kind of material should be used for the water imploder? I found options for ABS and PLA. Which one is better?
- 0 likes
Pozdravljena
Ne morem plačati, ne prejmem potrditvenega SMS-a. Mogoče obstaja še kakšen način, s kriptovaluto, Binance?
Hello!
I can't pay, I don't receive a confirmation SMS. Maybe there is another way, cryptocurrency, Binance?
- 0 likes
what goes inside the ashtray to catch the ashes. There is no bottom? I see holes like there is something that should attach?
- 0 likes
Its printed and add metall sheet
- 0 likes
It's printed and add metal sheet
- 0 likes
What is the skull astray itself made out of or where to buy?
- 0 likes
That did it! Thanks!
- 0 likes
Try now. Let me know.
- 0 likes
Really appreciate your designs. I downloaded the raspberry pi camera mount for the CR-10s and it was missing the stl for piece 4. It's in the composite but not a separate file. Could I find it somewhere?
Thanks!
- 0 likes
hi,
try now. try hint enter on link more times.
let me know
- 0 likes
/https://fbi.cults3d.com/uploads/user/avatar/14190034/5043721C-5C23-4B25-AB6F-BD1A514EA651.jpg "danifdezpei")
Buenos días! Resulta que el enlace a la figura que tienes subida de San Florián no deja acceder. Podrías pasarme algún enlace en drive o como sea para descargarlo? Un saludo, gracias.
- 0 likes
Love your 3D models! I’m reaching out from Neural4D , an AI-powered 3D generation platform.
We are really impressed by your designs and were wondering if you’d be interested in collaborating with us.
If you are interested, please let us know your email address or best way to chat!
“Thanks! Could you please tell me what kind of collaboration you have in mind?”
We’ve recently launched a Creator Program for creators in the CAD/3D design community.
As part of the collaboration, we’ll provide you with one month of free Premium membership so you can explore our platform and use it to create your own projects.
If you’re interested, I’d be happy to send you the detailed collaboration information via email, where we can discuss everything in more detail. Could you please share your email address?