👋 Hallo zusammen! Dieser Thread ist öffentlich, also lasst es uns nett und respektvoll halten. Keine Werbung, kein Spam oder unangenehme Dinge!
🇦🇷 Benutzerland: Argentinien
🌐 Bevorzugte Sprache des Mitglieds: Englisch. Sie können online über DeepL übersetzen.
💡 Beziehen Sie sich auf ein bestimmtes Modell? Fügen Sie den Link, den Titel oder die Modellnummer hinzu.
🖼️ Möchten Sie Fotos einstellen? Verwenden Sie einen kostenlosen Host wie ImgBB und fügen Sie die Links in die Nachricht ein.
✍️ Schreibtipps: Verwenden Sie das Markdown-Format, um Ihre Texte zu strukturieren und lesbarer zu machen.
You wouldn't happen to have the original playset of Grey Skull do you? I just bought a lot of MOTU REVELATIONS figs for photography, and need to put together scenery. I am not paying 150 for Adam... so I need to hunt him down too as an stl. Lol!
Nop, I haven't... Figures are getting more and more expensive; it's just a matter of continuing to look for new 3D models 😉
Have you put any thought into a 3rd wall for snake mountain? Maybe the actual peak with the snake like in the filmation series. Would definitely be interested in buying. Thanks for your time.
I thought sometimes about Filmation mountain. I could work on that 😉
bonjour de combien de fichiers votre château grayskull est il composer? je voudrai l agrandir pour des jouets de 17 cm de la gamme new eternia . est ce possible de le faire avec une creality hi ou k1 max?
et le prix inclus le château et les décor?
Hi there! I didn't design the castle itself, but rather certain parts to complement the toyline. Most of these models are available in vintage and classic scales. Check this section https://cults3d.com/en/design-collections/ameroni/castle-grayskull
Hi, I am interested in printing out for the classics Around the Abyss the Base, the Barbican and also Third Wall, and the back roof. Could you tell me approximately how many rolls of filament that would be for the classics Grayskull? Thanks.
Hi there! I do not print items, just design them. But I know you'll need a lot of them!
For the Crystal castle, my P1S isn't capable of printing the bigger pieces due to size. Are you able to print the compressed files and glue them? Thanks!
Hey there. I do not print items, sorry. Do you need help slicing pieces? Let me know
No, I meant for the compressed files, can I myself, print the pieces and glue together? For example, I'm printing the main wall 1-4 instead of the entire main wall file because it is too large.
Sliced files I mean, sorry
Oh sure! That was the idea 😉👍
Can you make a floor to go with the castle that will fit once the 3rd wall is in place, to complete the castle look?
I could do that! I'll add it to my list...
I've downloaded the zip and unpacked it. When I click on an STL file, all it does is open a picture of it instead of importing into Bambu Labs.
That's weird. Try importing the files from within the program instead of clicking on them; perhaps it's a configuration issue.
It looks like it's a Bambu issue maybe. I guess other have had trouble with files outside of Maker World. I'm trying other options. Can you upload the file to Maker World?
Try downloading the zip file again and extract it into a safe folder. If you can't open from the bambulab soft try opening the STL file in another program (such as Microsoft 3D Builder or OrcaSlicer), save it as .3mf, and try importing it again.
Design number 3083472, but i want to customize the front
I will add it to my list... But not for a near future
Hello! I read the description of the file. I just wanted to make sure the third wall is in scale with original vintage castle grayskull. Thank you so so much🙏
Hi! That's right, it comes in vintage/origins size and also files for Classics one. Check pics from makers here https://cults3d.com/en/3d-model/game/the-third-wall/makes
Thank you so much for answering and responding. I really appreciate it. Thanks again! Buying the abyss, the third wall, etc for a full build to seat my vintage grayskull.
Thanks for your support! Enjoy!
Have you seen that MOTU3DPRints is selling your digital files (and others like hex3d) on cults too? Like Modulok Connector, Moaty etc. hes not even changing pics. https://cults3d.com/de/modell-3d/spiel/moaty-motu-3d-prints
Wow! I didn´t know that. I will take actions immediately. Thank you!!
GRAYSKULL STYGIAN MOAT - will the Origins Castle Grayskull fit on this correctly?
It should be. It was designed for vintage one but they re almost same size. Check 3rd picture to see top sight
I need a battery cover is this one a separate cover or 1 whole piece
Are you talking about dragonwalker's? That's 1 whole piece. Includes a size variant
I saw a review on your MOTU Origins custom HAVOK Tower. It's really amazing. My question is what type of 3D printer do you recommend creating this? I'm looking to purchasing a 3D printer and would love to make this custom playset you've created. Thank you.
Hey, thank you! A resin printer has better details but expensive costs. A filament one like Pla it will be cheaper, lighter and more plastic toy tupé. Good luck!
Hi, could you tell me the diameter of the MOSQUITOR LASER handle? thanks
Hi, 4mm. Have a happy new year!
Could you provide me a couple of measurements from your Castle Grayskull floors? I would like to know what the floor space would be for each of the two red floors, at the original toy scale, without holes for the elevator and trap door. I'm thinking I could use that number to help estimate the castle's volume for my role-playing game adaptation of the franchise.
Hi, measurements are the same as vintage Castle, about 300mm x 200mm, but you can scale it before printing if you need. Have a happy new year!
Due to the curves involved, I don't have an accurate way of calculating the square centimeters of floor area. If it's not too much trouble, do you think you could open the model in your design program and test how much area is enclosed by the outer perimeter of each of the two floor pieces? That would be most helpful.
Good afternoon and Merry Christmas
Have you ever done a model for the wings of the fright fighter?
MERRY XMAS buddy! I' didn't but it can be done 😉
I would be very much interested in that if it ever came to fruition. How much do you think it would cost to create them?
I don't know yet, but if I publish it on Cults it'll be cheap as the rest of my stuff 😉
Hi, I have printed this bridge 3 times with no luck. I have tried petg & pla both. Any idea of what could be wrong?
Hey, did you try 100% infill? Or different print angle...
Yes I have tried both. The curved rails keep messing up. The straight ones don't seem to stay in the holes. Do you have to glue this all together? I am trying again with single objects on the plate.
Maybe you can try curving them with a little hot air of a hair dryer
I really want the King Grayskull Origins vest to make my custom figure.
Hey, I'll add it to my list!
Hi! I would like to know the difference between the versions of Webstor's armour. Which one fits the vintage figure better? Thanks
Hola! Las diferentes versiones las fui agregando a medida que me pedían para las distintas procedencias de la figura. Si el tuyo es TopToys recomiendo que empieces probando con la v2, ya que ese Webstor era más pequeño que los demás. Éxitos!
Sí, es Top Toys. Muchas gracias! Saludos!
TRAP JAW BELT AND WEAPONS RE GREAT DESIGN . FIT VERY WELL - DESERVED YOUR 5 STARS
Thanks buddy!
Thank you so much! You're awesome! I read several comments and how you respond to your customers in such a nice caring manner. I will be purchasing a lot more designs from you.
I do have a couple more questions / requests for you though. I just did the laser Cannon for the top of castle grayskull. I had the original floor and your gun fit perfect. I put a guy up there behind it and there's not really a place to stand. I was wondering if you could make another for for that extends further back in a curve that gives them a place to stand behind the gun? It would be cool if it had the straps for the feet as well.
My other request is for She-ra, my wife collects with me as well. I showed her the cartoon accurate crystal castle design you made. She thought it was cool, but she remembers the vintage playset she had more. So we are going to get that. We are going to do the bases for castle grayskull and snake mountain among many others for them. It would be cool if the vintage crystal castle playset had some cool accessories, a base, and some way to add the cartoon accurate castle as a topper. So it doesn't look left out next to our other playsets with all the cool designs. I found this image that illustrates something like it a cartoon tower on top of a vintage play set.
https://share.google/VJtTxDzDOXKadnfzN
Anyway, thanks again for the pins.
Let me know what you think about the ideas.
Thanks for all your feedback! Actually I designed the Crystal castle to fit the future vintage one as the picture you showed me. Just need more time to do it 😅 Keep in touch!
That's awesome! Well we aren't ready yet anyway, so no rush from us. We still gotta get the vintage one. I just hope it's not gonna be 36" tall on top of the vintage castle lol looking forward to seeing it when you get there. Thanks again!
😉👍
I purchased the current Crystal Castle design, but I would love a topper version as well! I would also like a base for the Crystal Castle playset. It would be great if the base could incorporate the Crystal Falls playset as well.
Thank you so much for all your great MOTU designs. I did the bridge for Snake Mountain and it came out great! I just need to process it a bit more before taking pics for makes. I'm doing the lava now. I noticed you have the holes for the pins, but it doesn't come with the pins. Could you maybe upload them as a separate free item or something. I noticed you had them with some of your other designs I plan on doing.
I'm just wondering what I should put each axis n when printing thanks
Hey! There are some pieces I don't know exactly; I just design it, sorry!
Anyway You can ask to one of the makers, like this expert: https://cults3d.com/en/3d-printing/crystal-castle
Let me know how it went!
Hi mate this looks fantastic, the size of the prints would i be able to do these on a creality ender 3 do you think or are they too big?
Thanks
Mike
Around the abyss is what i was asking about
Hi! I usually slice models around those limits (200mm) so you could print it. If you have any issue just let me know
Is this the proper buy to print your add ons? I want to build this. Toy photos and stop motion. https://www.ebay.com/itm/304784794197?_ul=US&mkevt=1&mkcid=1&mkrid=711-53200-19255-0&campid=5339114220&toolid=10001&customid=eb%3Ab%3Avms%3Aeb%3Ap%3A304784794197%3Be34a2a29311e18656ea5438a5a20ff01&loc_physical_ms=75272&loc_interest_ms=&msclkid=e34a2a29311e18656ea5438a5a20ff01
Indeed! My Grayskull models are designed for vintage/Origins and Classics scale