/https://fbi.cults3d.com/uploads/user/avatar/28008800/Weltende.png "Weltende")
I'm not only passionate about board games, but also about creating inserts for them. I often spend more time on this than actually playing the games, but I enjoy it. I notice myself improving with each design.
My philosophy with the inserts isn't about saving filament, but about creating a visually appealing insert that allows for quick and easy setup.
👋 Hallo zusammen! Dieser Thread ist öffentlich, also lasst es uns nett und respektvoll halten. Keine Werbung, kein Spam oder unangenehme Dinge!
🇩🇪 Benutzerland: Deutschland
🌐 Bevorzugte Sprache des Mitglieds: Englisch. Sie können online über DeepL übersetzen.
💡 Beziehen Sie sich auf ein bestimmtes Modell? Fügen Sie den Link, den Titel oder die Modellnummer hinzu.
🖼️ Möchten Sie Fotos einstellen? Verwenden Sie einen kostenlosen Host wie ImgBB und fügen Sie die Links in die Nachricht ein.
✍️ Schreibtipps: Verwenden Sie das Markdown-Format, um Ihre Texte zu strukturieren und lesbarer zu machen.
Hello! I plan to donate either way, but would you also be willing to make a one piece box that’s 340mm x 340mm by 20cm high? This is large enough to fit in my large print bed and it would be cool to have a one piece box for all my crazy board games that need extra boxes. Same lid design.
Would be willing to pay for the work. Thank you!
Which printer do you have? With bamboo printers, for example, the width is limited because the two nozzles prevent printing on either the left or right side. And 340cm would be a bit much for a Kallax shelf. Are you sure you need and can print those exact dimensions? But generally, I could make a box in one piece. I wanted to experiment to see how big I could get it on my printer.
I have a Creality K2 Plus. And I apologize I mixed my mm and cm measurements in the message. It's effectively 340mm x 340mm by 200mm high. Or 34cm x 34cm by 20cm high. The print dimensions of the K2 Plus is 350x350x350, and I've print stuff all the way to the edge of the bed, but that's cutting it close for where the nozzle can get, so I clipped it at 340.
that was my bad with the cm - i understanded your measures^^ Here is the Box: https://we.tl/t-tN5Fbb2cRwTi2Chv it is 20cm high with Lid including. You can write me @ weltende@live.de if you need any changes.
First of all, thank you SO much for this insert. As an all-in backer of most Teburu games, this is the sweetest thing ever.
I was curious if there was a way to get the English/US spellings of the zodiacs on the sheet? Taurus vs Taures on the print. Not a huge deal overall, more curious about different spelling availabilities!
Hey, sure, i can do it. Can you give me all the spellings wich are different, or is it only Taurus?
Just that one! I checked them all this week.
Hi Herbert - Seems it was my fault. Have researched again and it´s calles Taurus everywhere. So it was just a right sounding typo :D I corrected it and updated the files. Thank you so much for the correction info.
Hello Weltende,
I am referring to the "The Bad Karmas All-in insert" 3D design, which I purchased. The insert is generally excellent, as it makes very good use of the available space in the game boxes. However, there is a small error in the 3mf and STL files.
With the "Black Karmas Minis Holder Black and White" model, the dimensions do not match the box the holder is supposed to slide into. It is simply too large; when you slide it into the box, the figure holder protrudes beyond the box's edge. I assume this isn't intended. The problem is that this prevents all the game boards from fitting into the box.
Is it possible for you to correct this error, or am I perhaps doing something wrong during printing?
I would appreciate a quick reply.
Best regards,
Herbert
Hey, i will Look Into this:)
You right. A added the old File. It is now corrected. Thank you!
Hi There, the old / Wrong file is still in the 3mf file. Still love your Insert
Hey, i will Check it out and Update the Files when i,am Back at Home today.
Thanks for the Info. Seems i missed uploaded the 3mf and only updated the single File. Now all shoud fit. Thanks for your support!
Excellent design and well worth the price! I design and sell inserts myself, and with the US retail launch picking up steam, you could easily charge more for this quality — could you send me a direct message or share how I can reach you privately to discuss additional feedback?
Thanks for sharing!
Jay
Hey Jay, thanks a lot. You can write.me at weltende@live.de
Hi,
Thanks for the insert for Street Masters, it's great.
I have a quick question about the storage for the Stages, specifically regarding the compartment for the Out Of Time and Rude Awakening tokens.
Is there a version of the compartment that closes?
Because right now, if I put the tokens inside, they fall right through. ^^
Thanks again anyway. I rarely see inserts of such high quality, both for the space-saving and for the faster setup.
I had to think about what you meant for a moment, but sure – I'm surprised no one had mentioned that before. There should actually be a box without a cutout included. I've updated the offer, but here's the tray as a direct download for you :) https://we.tl/t-AdLfm0LrO7ZdUU1Z
Great. Thanks.
I just received the complete set of the game (SFG), and I thought I’d missed a detail, but it turns out those are indeed the tokens that go there. 😄
Thanks again for the great work.
I thank you! Hope you will have a great time with this great Game:)
Hello, I would like to know if the insert for the critter Kitchen has any lid lift. Thank you
Hi, about 2mm Lid lift
Moin, ich habe mir heute das Insert für Scarface 1920 inkl. allen Erweiterung von dir geladen. Sehr gute Arbeit. Vielen Dank für deine Zeit.
Ich vermisse aber die kleinen Einsätze für die Hauptquartiere, Fahrzeuge etc. (die die du in den Spielerfarben gedruckt hast). Vielleicht bin ich auch zu schlecht im finden. Kannst du mir die Bezeichnung der Datei nennen? Ich nutze die .stl Dateien. Ich finde nichts in den deutschen und auch nichts in den englischen Dateien. Danke.
Hi. I purchased the DINO DYNASTY BOARD GAME + EXPANSION INSERTand it doesn’t seem to contain the container for the 16 event tiles. Did I just miss them, or are they named something else? Thanks.
Hey:) As described in the PDF, the 16 Event Tiles are mixed together with the 80 Territory Tiles and placed in the large boxes. No extra box is needed for them, as they will be mixed in with the other tiles anyway. The Expanding Event Tiles, however, have their own tray.
Sorry I missed that detail. Thanks! The organizer is great!
Thanks for your support :)
Hi Weltende,
Thanks for your previous answer about the multicolor! I’ve buied and started to setup a project for the insert, but I’ve run into a technical inconsistency between the files.While some files (like the Player Tray and Coin Tray lids) have the 0.1 mm offset you mentioned, allowing me to perform a manual filament change easily, many others (specifically Adas Dream - I+II Card Tray lid.stl and several more) appear completely flat.
Without that physical thickness for the details, I cannot use the 'color change at layer' technique in PrusaSlicer.I tried opening the .3mf file in PrusaSlicer to see if the data was there, but since it was likely created in Bambu Studio, the color information doesn't translate correctly to my setup.
Could you please check if the remaining lids can be updated with that $0.1 mm offset for the logos/text?
Also, as a small suggestion for the project: it would be incredibly helpful if the PDF instructions included a list matching the filenames to the physical components shown in the photos, along with your recommended colors for each part.Looking forward to your help so I can finish this beautiful insert!
Best regards
Hi, the problem with these files is that they're printed with the image side facing down. Therefore, the text can't be extruded further without causing printing issues. I tried it the other way around and cut out the pattern. The test file is availible for 3 days with this link: https://we.tl/t-fN4mxa2GIK maybe that will work. Just let me know, and I'll adjust the others for you as well.
Unfortunately, I'm a bit too focused on this, as I only work with Bambu and tend to overlook everything else. Bambu displays the recommended colors directly. However, apart from the parts that are important for the game, I don't really want to specify colors. :) I'd like to include that in the PDF in the next few days.
Hi Weltende,
Thanks for sending the test file so quickly! I gave it a try, but unfortunately, the 'carved' method (printing the lid face down and filling the gaps later) doesn't produce a clean result with a single extruder. The manual color change at that height leaves visible gaps and the finish isn't professional.
I’ve discussed this with some expert printers, and the best way to support single-extruder users (like Prusa owners) is the 'Inlay Technique'. This provides a flawless, flush surface.
To make this work, I would need the files designed as follows:
The Lid: A flat lid with the logo/text recessed (carved) by 0.2 mm.
The Inlay: A separate solid of the logo/text with a thickness of 0.25 mm.
Crucial Point - Alignment:
It is very important that the two parts (Lid and Inlay) are exported with the same 3D origin point (coordinates). You can do this by exporting them as a Multi-Body STL, a STEP file, or as two separate STLs that share the same workspace coordinates. This allows me to import them into PrusaSlicer as a single multi-part object, ensuring they are perfectly aligned automatically.
The Technical Reason:
By having the logo as a separate part that is slightly thicker (0.25 mm) than the recess (0.2 mm), I can offset it by -0.05 mm in PrusaSlicer. This allows me to print the logo first on the bed (at Layer 1), then the printer will trigger a filament change, and I can print the lid 'around' it on the same Layer 1. This creates a perfectly smooth, multi-color surface.
Could you provide these updated files for the lids as test? This approach would make your amazing design accessible and 'pro-looking' even for those of us without an AMS.
Thanks again for your patience and help!
Unfortunately, Tinkercad can't export STEP files. It can, however, export OBJ files, which are also treated as two separate objects. Perhaps that will work. I've attached the OBJ file here, along with the recessed lid with the 0.25mm ornament. Since I can't choose the coordinates, you might have to manually slide it into the holes. But it should still work. Strictly speaking, it should also work if you only have the ornament and a smooth lid, right? Then you just move the ornament to where you want it and color it? I've included a smooth lid for that scenario as well. I hope one of these options works.
Hi Weltende,
Good news! I’ve completed the tests with the files you sent, and the 'Inlay Technique' works perfectly!
The combination of the 0.25 mm ornament and the 0.2 mm recessed lid is definitely the best solution. By setting the ornament at -0.05 mm in the slicer and using a 0.2 mm first layer height, I can print the logo first, then change the filament and print the lid around it. The result is a smooth, professional-looking flush surface.
Since Tinkercad doesn't preserve coordinates, I can manually align the two parts in PrusaSlicer without much trouble, so don't worry about the origin points.
Could you please provide the remaining 'flat' lids in this format? For each lid where the logo is currently flush, I would need:
This setup is the most reliable way to prevent the nozzle from hitting the print while ensuring a great multi-color finish for single-extruder users.
Thank you so much for your patience and for adapting these files for me!
Cool that it works. I Work in the Rest at the Weekend and Upload them:)
Here it is – it took quite a while. I hope it works with all the files: https://we.tl/t-Sn3KNn2fLd Unfortunately, I couldn't do it with the Assignement card lid. But all the other covers should be in the archive.
Hello Weltende,
thanks for your answer! I download the file and I already star printing!! Meanwhile I find a little error. On the files you provided me:
- Adas Dream - Exhibition Deck lid rescess and
- Adas Dream - Exhibition Deck lid rescessed
Are exatly the same, can you check and send me the one missing? Just for curiosity why you cant' do it with Assignement card lid? It's fine but just to know.
Also I strongly suggest you (after my test print) to put all of this file in the general file so you can sell this fantastic insert also to everyone has a single extruder and obiouvsly if you put the name file on the pdf put also the one of single extruder.
Just my 2 cents
Sorry for the double file. Here is the right one: https://we.tl/t-uSquAT6EWu In the meantime i worked on the assignement card lid. Did not had the graphic anymore and extract it from the file did not work. But now its done:) The files are in the archive too.
Once the tests are finished, I'll include them in the offer. :) I would also add instructions on how to do that in the slicer, but I probably won't be able to manage that.
great print so far but the multiplication gear holder is a bit too tight. Anyway you can increase the internal diameter a bit?
I add a new Version with a wider Version of it. I cannot test it, so woud be cool, of you can tell me if it fits better now, after you print it.
Hello,
I started printing this and noticed that the sliding lid for the "PENITENT ONE" Is not present. Its only there in polish and another language.
Hey, you are printing the sliding Lid variant? I updated the Files with the Penitent One. Please redownload them.
Hey, thanks for the updated files. Yes I am printing the sliding lid variant. Just about done with only a few hiccups. Another question, There are 2 containers in the Jarl box that are designed to have a sliding lid but there is no lid file present.
do you mean the obstacle container? There are 2 Obstacle lid files (marked with Optional). The trays do not need lids, but you can print them anyway für vertical storage.
Thank you, found the files. Much appreciated
Hello the design for Ada's dream is possible to print with A Prusa Core One? I don't have multicolor (yet) so you use the technicque of change layer or a colored printer is necessary?
Hi, a multi color printer/AMS ist needed for this. Layer change techique ist not integrated, but should be possible to so it youself in your Slicer. Since I've never needed it, I've never experimented with it. Sorry.
Thanks for answer. I can put on my slicer without a problem but the part in multicolor has for the secondary color one or two layers upper respect of the main colors?
I'm not entirely sure what you mean. But if I understand correctly, it's like this: The parts with a different color are 0.1mm higher than the lid. So, essentially one layer higher.
Crossing my fingers to get it working again. Thanks again!
Sorry I sent to two areas. I wasn't sure if you'd answer. Thank you very much.
I'm in the s l o w process of having Bambu help me with an AMS issue. If that goes well, I will definitely grab this. It is very impressive, well done!
Hopefully just 1 more question. Did I understand correctly that the files are ready to print (with different colors) or will I have to colorize things to what I want/need? I'm a very lame 3d guy. I have changed a couple colors on the tops (using depth I think it's called) of some prints, but that's about it and my AMS no longer recognizes which Bambu filament I have inserted even though it's supposed to send the information via the little chip).
Hi, no problem. It contains a 3MF file that pre-colors all the parts in English or German. So basically, you just need to insert the matching colors. If your AMS no longer recognizes this automatically, you'll have to be careful which color you assign to which part.
Hello.
Can your Scarface 1920 insert also fit Eliot Ness? I ask because I see the Paper Boy, but not his name. Thank you.
Of course both Eliots will fit. the normal and the angry one.
Hallo Weltende,
Ich habe versehentlich die Einlage „Ada's Dream“ zweimal bestellt (Bestellnummer 147779855 und Bestellnummer 148070112). Könnten Sie mir bitte die Bestellung mit der Nummer 148070112 erstatten?
Übrigens, es gefällt mir wirklich sehr. Vielen Dank für deine harte Arbeit!
Tausend Dank!
No problem - Refund is on it´s way :)
Thank you so much!
Hallo Weltende, beste Grüße,
ich habe die Blacklist Game-Version von Street Masters All-In und möchte gerne ausdrucken, was Sie erstellt haben. Ich habe ein paar Fragen zu der Datei.
Ich habe vor, eine A1-Kombination zu kaufen. Wird das ausreichen?
Können Sie mir sagen, wie viel von jeder Farbe ich von den benötigten 7 kg PLA benötigen werde?
Vielen Dank.
Hey Shurato, also wenn es nicht der A1 Mini, sondern der normale ist, kein Problem. Die vorgefertigte Druckdatei ist für 256x256 mm ausgelegt.
Von den Farben Rot, Orange, Grün und Holz brauchst du unter 100g, aber kommst da natürlich trotzdem nicht an einer ganzen Rolle vorbei. Hier die Anzahl an Rollen für die von mir gewählten Farben. Du kannst natürlich z.B. auch alle Trays in Schwarz drucken. Das ist dir frei überlassen. Hier die Aufteilung so wie ich es eingefärbt habe:
Schwarz 4 Rollen
Weiß: 3 Rollen
Grau: 1 Rolle
Rot: 1 Rolle
Orange: 1 Rolle
Grün: 1 Rolle
Holz oder Holzfarbend: 1 Rolle
Für die ganzen Teile mit den Namen drauf, empfehle ich übrigens eine 0,2er Nozzle zu benutzten. Geht auch so, aber gehen einige der Details an der Schrift verloren.
Hallo, ich habe angefangen, Box 1 Fighters zu drucken, musste den Druckvorgang jedoch unterbrechen, da es für die Türen der Figuren in Ihrem Profil keine Halterung gibt und der Druck ins Leere ging. Wie kann ich das beheben?
Hi Shurato, that's strange, the supports are actually already set. I've updated and uploaded the file again. Try that, hope it helps. If not, just check the box for support and set it to the standard tree.
Die Medien sind auf „Klassisch“ (manuell) eingestellt.
OK, Set it to tree (Auto)
Danke.
Hi Weltende, I would like to know if I need to print a special insert for the Hanzo ally?
Hi Shurato, the Ally miniatures go into the compartments of the bottom insert, as shown in the PDF.
Hallo Weltende
Ich habe dein Inlay von Adas Dream gedruckt. Ersteinmal riesen Kompliment es sieht mega aus, und mit so viel tollen kleinen Details. Wow
Nur eins, ich finde die Box nicht für die einer Münzen.
Ich würde mich sehr freuen über Antwort
Ganz liebe Grüsse
Doro
Hi Doro, vielen dank für das Lob:) Die Box für die einser Münzen heißt bei den einzelnen Dateien 1 coin Tray und falls du über die Bambu Datei drucks, ist die auf einer eigenen Platte mit dem Titel 1 Coin Tray.
About the Recall insert(s)
What is the maximum/minimum bed size required to print this insert? I am running a PrusaMini with ~18cm² bed.
Need to know before I buy :-)
Many thanks
P96
not 18cm² ... 18x18cm.
Hey, you remind me of state the minimum printing size on each product :) Unfortunately, one section (where the HexTiles go) is 185mm long. Theoretically, I could shorten it by 5mm for you. That wouldn't be a problem; there would just be 5mm of space in the box then.
I'm using Prusa Slicer. It offers a split-part option (I guess most do today). If you see an option that I can split that part in two w/o compromising anything I would be fine.
Thank you for the offer to modify the part in question but if you could say if above is doable that would be of great help.
Noticed small errors Recall Insert, specifically the 3mf. Also, some of the Ada's Dream insert seem to be included in the Recall Insert download files.
- The crates tray seems to be missing
- The token bag tray has one black line not painted in (plate 5)
- The dot on the i in Pig Farm is not painted in (plate 17)
Hiya, I am wondering about Runar insert, I have printed it already with regular lids and its tricky to get them out of the box so I think I will print again with sliding lids, but I have noticed there is no sliding version for the "Player Material Boxes", am I missing something? Or is there any possibility to request those? Great job anyway!
Also. could you provide a font name used for lids? I would like to add translation for Petent One ("Pokutnik" in polish)
Hey:) I added the Pokutnik lid (sliding/Cover) to the Game Box I.zip. Unfortunally i cannot offer a sliding lid Version of the Player Material Boxes and i do not think it woud be much easier to pull them put. If you stuck, try to take off the cover and pull out the tray then.
Hi, i want to purchase the project but i have some questions.
- Is it possible to print all the parts with an A1 Combo?
- Is it expected that all the cards to be inserted into the compartments will have sleeves?
- Is there a way to reduce the total weight of plastic used? (3.3 kg in total is quite heavy)
Thanks :)
Hey, wich one do you mean exaxtly?
Ah sorry, RUNAR ALL-IN (i've the complete gamefound game)
hey, it fits sleeved cards. (I sleeve with Gamegenic) It´s fully printable on the A1 Combo. It´s a lot filament, since everything has its own box and it´s for 2 Game Boxes, so it´s naturally more filament. Sure it woud be possible to make some Honeycomb boxes, but that won´t do it for me.
Hi, perfect thank you! I'm also looking for Black Rose Wars Rebirth (ROTAS Edition), but i don't found anuthing :(
If you want a one Box solution try this: https://www.thingiverse.com/thing:6453928 there are some other inserts for BRW:Rebirth there too.
Hi Cooles insert für Adas Dream allerdings fehlt das Tray für die Gelben Zahnräder in der Datei oder ?
Hey =)
You made a really nice insert for Runar !
Unfirtunately, I dont have the allin, just corebox+SGs+Troll. Do you think I can put all this into the corebox with your insert (or with a bit of modifications) ?
Thanks ;)
Tony
I do not think it woud work very well. Even if you woud slimmer the Playertrays (because no Jarl Mini) all the Nemesis Boxes, Cards, Characters, PlayerMats and Token woud not fit into one Box without massive Modifications. Sorry - But maybe you will add some more Expansions later ;)
Too bad but I ubderstand....
I dont know, there are lots of stuff in the basic pledge and expansions are quitte rare ^^ Until then I cannot store my game correctly as I dont have the Jarl other big box
I will think about it ;)
/https://fbi.cults3d.com/uploads/user/avatar/39276133/openart-image_1777260728713_2a6c8c0c_1777260728932_a476d481.png "eastempiretraders")
Hallo,
English:
i want to Print your Insert, but i am not sure which of the 4 3mf Files i have to print. I've got the Steamforge All In Box. Box 1 is mandatory but which of the 3 other Box 2 3mf Files do i have to print additionally?
Thanks in advance
Deutsch:
ich möchte das Insert drucken, bin mir aber nicht sicher welche der 4 3mf Files ich drucken soll. Ich habe das Steamforge All-In. Box 1 ist soweit klar, aber welche der 3 Box 2 3mf muss ich zusätzlich drucken?
Danke dir
Hi Christian, du brauchst die Street Masters Box II Steamforged Games und die Street Masters Box II Part 2. Bei der Kontrolle hab ich festgestellt das beim letzten Upload die Blacklist Version verschütt gegangen ist, daher vielleicht die Verwirrung :) Hab das mal korrigiert und neu hochgeladen.
Nice, thanks for the reupload and clarification