Hello, do you have license plate holder for ktm exc-f 350 2025 please. Thank u
- 0 likes
👋 Hallo zusammen! Dieser Thread ist öffentlich, also lasst es uns nett und respektvoll halten. Keine Werbung, kein Spam oder unangenehme Dinge!
🇸🇪 Benutzerland: Schweden
🌐 Bevorzugte Sprache des Mitglieds: Englisch. Sie können online über DeepL übersetzen.
💡 Beziehen Sie sich auf ein bestimmtes Modell? Fügen Sie den Link, den Titel oder die Modellnummer hinzu.
🖼️ Möchten Sie Fotos einstellen? Verwenden Sie einen kostenlosen Host wie ImgBB und fügen Sie die Links in die Nachricht ein.
✍️ Schreibtipps: Verwenden Sie das Markdown-Format, um Ihre Texte zu strukturieren und lesbarer zu machen.
Schreibe deine Nachricht:
12 Kommentare
Or could you make it if u dont have it please 😁
- 0 likes
Sadly I don't
- 0 likes
Is it possible to you to make one ? :(
- 0 likes
I can but I don't have the measurements.
- 0 likes
And is it possible if i somehow write u them i mean if u say wich and how the measurements u need exactly.
- 0 likes
Yes it's possible but i need measurements and an idea of what it should look like.
- 0 likes
Okay ill try my best and measure it with some pictures is it possible to send you email or something
- 0 likes
Ok i have the measurements where can i send them to you.
- 0 likes
You can send to max.anell@skola.botkyrka.se and some pictures and I can try to make one in a couple of days. I need distance and hole sizes and the measurements of the oem rear light.
- 0 likes
Ok i’ll do that🫡
- 0 likes
I did send u the pictures on your email if you can reply to me
- 0 likes
hey bro the data doesnt work
- 0 likes
What do you mean? Don't the stl file work?
- 0 likes
Hi, wondering what the dimensions are for the KTM 08-11 license plate holder, will it work to print in a flashforge finder? Maximum 150x150x150mm. Thanks
- 0 likes
It's about 180mm wide, If you put it diagonally it will probably work.
- 0 likes
Awesome, Will try!
- 0 likes
How much filament does this take?
- 0 likes
Can't see which model you have commented on. Can you specify which one?
- 0 likes
Do you have a plate holder for the 2024 fe 450 Husqvarna model?
- 0 likes
Sadly I don't have it.
- 0 likes
License plate holder does not say it requires supports. Bambulab will not print it..
- 0 likes
Just enable supports in bambulab studio. I recommend tree supports.
- 0 likes
Hello! I would like to know if in the husquvarna mirror cap and in the protectors of the heels it would be possible to replace the logo with the G of gasgas, thank you very much !!!
- 0 likes
hey brother is it possible to have the file for the husquarna 701 clutch lever cover.. thanks
- 0 likes
Hey Bro, you have plate holder for 2007 EXC525?
- 0 likes
Sadly I don't have it.
- 0 likes
Can you do it?
- 0 likes
I don't have any measurements and I can't test it so sadly no.
- 0 likes
I was just wondering if the Husqvarna 2017-2019 Plate holder also is compatible with the ktm exc 2017-2019 bike.
- 0 likes
Hi! No it doesn't fit. The husqvarna and ktm has diffrent subframes but I have a model which fits the ktm 2017 - 19 which i can put out but i don't have any photos.
- 0 likes
That would be really nice of you, i could send you photos after i put it on to you would like to.
- 1 like
I would like that! Now I have put out the model!
- 0 likes
Do you have discord or anywhere i could contact you?
- 0 likes
You can send a mail to max.anell@skola.botkyrka.se
- 0 likes
Hey ich hab gesehen das du bei dein 701 die Pfersen Schutz in Carbo gedruckt wie würde das funktionieren
- 0 likes
Hey! It's printed on a carbon fiber textured bed to get the carbon look. So it's not real carbon fiber but petg with a carbon texture. You can find these textured beds for your printer on aliexpress or amazon.
- 1 like
Hey @superMax3D the file does not fit. The spacing on the holes where the bracket mounts to the inner fender are too wide. The holes don't line up and the outer edge of the bracket it's too wide to fit between the subframe/fender. The rest of the holes, like for the taillight are correct so i know its not a scale issue. 23' FE 501
Weird, because I have tested it on a personal bike and it fits without a problem. Are you sure it has printed correctly and not had a layer shift during print?