Hey, I'm looking for the Shadow F sculpt. I've seen it for sale on Loot hoarder. Was hoping to print a couple myself, but can't seem to find it on here. Is it an exclusive?
- 0 likes
👋 Hallo zusammen! Dieser Thread ist öffentlich, also lasst es uns nett und respektvoll halten. Keine Werbung, kein Spam oder unangenehme Dinge!
🏴☠️ Benutzerland: Unknown
🌐 Bevorzugte Sprache des Mitglieds: Englisch. Sie können online über DeepL übersetzen.
💡 Beziehen Sie sich auf ein bestimmtes Modell? Fügen Sie den Link, den Titel oder die Modellnummer hinzu.
🖼️ Möchten Sie Fotos einstellen? Verwenden Sie einen kostenlosen Host wie ImgBB und fügen Sie die Links in die Nachricht ein.
✍️ Schreibtipps: Verwenden Sie das Markdown-Format, um Ihre Texte zu strukturieren und lesbarer zu machen.
Schreibe deine Nachricht:
101 Kommentare
Hi. I forgot about it. I'll post them today. If you mean mechas))
- 1 like
Yes, and yes please, thank you! =D
- 0 likes
I'm also trying to find a decent Cat-K2 sculpt. You definitely have one as I've seen people selling prints of it. Are the STLs hosted on Cult only a sample of your back catalogue? If so, where (if anywhere) are the other STLs hosted?
- 0 likes
You bloody hero - thanks.
- 0 likes
Hi, I purchased the ThunderB yesterday. I really like the sculpt but I've printed it and I note that both the body and arms are "cups" and so it's difficult to glue them together. Is there a separate ball-joint to place between them that's missing from the STL file or do the arms have a missing piece that locates into the body like the other STL I've purchased? I'm finding it difficult to think that the intent was for us to glue two cups together given the otherwise high quality of the sculpt.
- 0 likes
Hello. This model is designed for use with magnets. You can glue them together without magnets, but if you're having trouble, we'll fix the problem a bit.
- 0 likes
You should now have access to an additional new small archive in ThunderB.
- 0 likes
That's a bit embarrassing and now totally makes sense - thank you!
- 0 likes
Quick question. Do you intend to make a model for the Doloire mech? That is one I would like to see you make, especially if you can get it as close to the metal model as possible.
- 0 likes
hello. no
- 0 likes
Unfortunate for me, but there is no penalty in asking. I thank you for letting me know.
- 0 likes
So I'm looking to get some aerospace units and maybe some vtols added to my battletech collection, but I need to ask how your prints scale in comparison to CGL's plastic models? I've browsed etsy for 3d printed aerospace fighters and they were disappointingly smaller in scale. I also want to know the if the same scale applies to combat vehicles, should I want to get some tanks.
- 0 likes
When browsing products, you can see thumbnail photos. Models are printed at 100% resolution. They are placed on standard-sized hexagons. The beauty of 3D printing is that you can scale them as needed.
- 0 likes
So I'm looking to get some aerospace units and maybe some vtols added to my battletech collection, but I need to ask how your prints scale in comparison to CGL's plastic models? I've browsed etsy for 3d printed aerospace fighters and they were disappointingly smaller in scale. I also want to know the if the same scale applies to combat vehicles, should I want to get some tanks.
- 0 likes
Hi there. Still looking for the Donar. When might that be added to the shop?
- 0 likes
Hi. today.
- 0 likes
You do great detailed work. What is the Scyt based on?
- 0 likes
hello. thank you. https://www.sarna.net/wiki/Scytha
- 0 likes
I really liked your models and wanted to know if they're from any games. If I buy your models, do they come with any rules and how to play?
And if so, do they come with damage values and armor movement?
- 0 likes
Hello.
My models can be used for different games depending on the print size.
Not all of them have spreadsheets.
- 0 likes
Hey SMB! I hope you're having a great week. Just checking in -- any updates on the Brutus ModPPC2? I might have missed it, but last I saw of it was your WIP in July. Have a great weekend! :)
- 0 likes
Hello. I remember.
- 1 like
Hey SMB - you do great work and I have many prints of your sculpts, they are amazing! I know you probably get a lot of requests, but Im curious if the Iron Cheetah might be in your pipeline at all. Thanks!
- 0 likes
Hi. Thank you. Possibly.
- 0 likes
Well my question got answered lol, what timing...
- 0 likes
I have a question that I hope you can answer. Your Matras model, which battletech mech is that based off of?
- 0 likes
Also, any chance you'll ever do your own take of the Uziel?
- 0 likes
hello. inspired by https://www.sarna.net/wiki/Awesome
- 0 likes
Sweet! Thank you!!
- 0 likes
Hi there, where can I find the "donar" air unit?
- 0 likes
Hi, I think it will be relatively soon here.
- 0 likes
Hi the Sam Destroyer says it comes with a hover hex for it but I dont see that in the files that are from the purchase?
- 0 likes
Hello. Download the archives again.
- 0 likes
Thank you!
- 0 likes
Can you please refund the Karnov. I bought 2 by mistake. It was supposed to be a scarab. Not another Karnov. I added it to the cart, I'm not sure what happened.
Thank you
- 0 likes
Order number 130697270
- 0 likes
Hello. I sent a request to return the order number 130697269. I hope it is not important for you which of these two VTOLs to return the funds for)
- 1 like
nope, they were both the same exact VTOL. It never cleared my cart after buying it the first time then I added a mech and thought it was in my cart but it just processed the VTOL again. No worries we should be good! Thank you!
- 1 like
Happy printing.
- 1 like
Hi there, really like your sculpts. Do you have a sculpt thats based of the Zhukov Heavy Tank or Brutus Assault Tank from Battletech? I have looked through all the ground vehicles and I personally could not find one for either, so wanted to double check.
Thanks
- 0 likes
hello. no. and https://cults3d.com/en/3d-model/game/brutussc
- 0 likes
I can't find it on your cults3d, but on your Patreon, the standard Brutus is listed as "Brutusas" and posted on January 2.
The one you posted above -- "Brutussc" -- is a custom, fan-made Brutus variant.
- 0 likes
Patreon is Patreon. And Cults is Cults.
- 0 likes
The model was on Patreon. It is not available now.
- 0 likes
I am curious, will you be creating your own version of the Lament any time in the future?
- 0 likes
why not? maybe
- 0 likes
The lament is one of my favorites. It is so simple and straightforward in function, yet can be used in a surprisingly broad range of applications.
- 0 likes
I must also mention that a mech I hope to see you make is the Thor II
- 0 likes
Hi SirMortimerBombito. THe ThunderB arms don't have a ball joint for attaching to the torso. as well there are legs that are only posed for presupported. Are these intended?
- 0 likes
Hello. The model is designed for assembly with magnets. It can also be assembled with glue. Regarding the legs, the archive contains 2 poses and 2 ready-made pre-supported files for different leg poses. It happens that the archive may contain errors when downloading. Download the archive again.
- 0 likes
Hey SMB! Big fan of your sculpts -- I bought something like 10 in the last month! :)
I've become something of a Large Laser fiend of late, and the Brutus (PPC2) spec sheet caught my eye. Packing x2 Large Lasers and a PPC for less than 1000 BV is extremely unique!
I noticed you've got a default Brutus sculpt and an unofficial fan variant.
I'm sure you get this kind of question a lot -- but any chance you've got a PPC2 variant in the works that replaces the LRM20 with a PPC?
The turret you have for your default Brutus Sculpt is already one of the coolest ones you've cooked up, and I'm wondering how much cooler it would look with a PPC mounted asymmetrically where the LRM20 is. Almost like a Marauder but a tank!
If not, no worries! Have a great week! :)
- 0 likes
Hi. Why not.
- 1 like
!! I look forward to seeing what you come up with! :D You're the best, SMB!
- 0 likes
Hey hey! I hope I'm not pestering -- any update on the PPC2 Brutus?
- 0 likes
I didn't forget. Don't worry.
- 1 like
Love your BT tanks. Have you ever made a repair truck/MFB from MechComm2?
- 0 likes
thank you. no.
- 0 likes
Hey, super happy to see a Parash finally! I did wonder if there were any plans to create an alternate that has the Parash 1/2’s head, and if there was any possibility of my standard looking mech poses for it? Thanks for your time man, and keep up the incredible work!
- 0 likes
Hello. no
- 0 likes
Hi your models are great. I wanted to know how much a commission for a Japanese style Phoenix Hawk might be?
- 0 likes
Hello. Contact me via social networks.
- 0 likes
Is there a Warrior VTOL variant model that can be scaled up to 1/72 or 1/48?
- 0 likes
The beauty of 3D printing is that you can scale the model to the size and scale you need. My models are made for 6mm (1 to 260-285), many of them I printed in 12 and 15mm. But I haven't tried in larger ones yet.
- 0 likes
I love your stuff. Do you have a alpha wolf proxy sculpt for sale?
- 0 likes
thank you. No.
- 0 likes
When you load this into the Orca slicer. It has 1 leg. And not options for more legs. But the picture shows it with all legs. Somethings up.
The slicer is specified in the specifications.
To assemble the complete model, you need to copy and mirror the required leg elements.