/https://fbi.cults3d.com/uploads/user/avatar/13492133/fotoperfilharu.jpg "Motion_0112")
Hello Motion_0112,
thanks a lot, it is quite helpful. One further question, on wich side is pin 1? at the side with the M2 screw or opposit at the side with the plasic cube?
- 0 likes
👋 Hallo zusammen! Dieser Thread ist öffentlich, also lasst es uns nett und respektvoll halten. Keine Werbung, kein Spam oder unangenehme Dinge!
🇪🇸 Benutzerland: Spanien
🌐 Bevorzugte Sprache des Mitglieds: Spanisch. Sie können online über DeepL übersetzen.
💡 Beziehen Sie sich auf ein bestimmtes Modell? Fügen Sie den Link, den Titel oder die Modellnummer hinzu.
🖼️ Möchten Sie Fotos einstellen? Verwenden Sie einen kostenlosen Host wie ImgBB und fügen Sie die Links in die Nachricht ein.
✍️ Schreibtipps: Verwenden Sie das Markdown-Format, um Ihre Texte zu strukturieren und lesbarer zu machen.
Schreibe deine Nachricht:
5 Kommentare
The screw side
- 0 likes
Hello Motion_0112,
I am quite iterested in your UleFone usmart to USB-C connector! Do you have a link or a spec. for the pogo pins and for the USB-C connector? Do you need on each pin (5 and 6) a resistor or only one at GND?
Many Thanks for support!
- 0 likes
You need two resistors, one connected to between 5 and GND and another connected between 6 and GND.
The pins I used are this ones: https://es.aliexpress.com/item/1005003789336445.html?spm=a2g0o.order_list.order_list_main.230.7eb6194dvfLRTf&gatewayAdapt=glo2esp
You need to choose the "H 5.5" option.
The usb C I used is this one: https://es.aliexpress.com/item/1005005373593406.html?spm=a2g0o.order_list.order_list_main.225.7eb6194dvfLRTf&gatewayAdapt=glo2esp
- 0 likes
Hola, me podria contactar por que me gustaria comprar una licencia del producto ¨MOUNTAIN BIKE DERAILLEUR GUARD¨ para un uso comercial
- 0 likes
Lo siento, no está a la venta
- 0 likes
Para aclarar más la razón, este modelo lo he diseñado con una licencia de uso personal de Fusion 360, por lo que el uso comercial de este modelo esta completamente prohibido.
- 0 likes
Entonces no lo puedo imprimir para comercializarlo?
- 0 likes
Así es, como bien dice la licencia del modelo, es un modelo para uso personal NO comercial. Está prohibida su venta o comercialización de cualquier tipo.
- 0 likes
/https://fbi.cults3d.com/uploads/user/avatar/15321191/J_LDesign_Logo.jpg "JLDesigns3D"){kind=logo}
The main differences are in how it attaches and how well it performs. The v2 dragon has a more refined duct opening and cross-section. Sorry for the delay, I just realized ppl can message us on here.
Does that answer your question?
Best,
Jake
- 0 likes
Hi, I didn't use any paint. My printer is a bambu labs X1 carbon and I did a multicolor print for it to look like that.