13 Kommentare

Hola, siéntete libre amigo, la única prohibición es la venta del archivo digital, de resto puedes hacer lo que quieras. :)

vale, muchas gracias! Quieres que te enseñe foto de como lo he pintado? donde puedo ponerla?

Me encantaría verlo!! Etiquétame en Instagram: @LA3Design_X

ya te etiqueté. Tengo un diseño que me gustaria hacer. Luego te pregunto por instagram a ver si seria viable

Hello!! I'll take a look at the model and see where I can make more cuts on this cape :) what is your printer?

thanks!!! It's Elegoo Saturn 3 Ultra

I made the new cuts, tested them here in Lychee, and everything fits perfectly on the Saturn 3. It ended up with 4 cuts. The file is separated in the download files and is called “NewCapeCuts.”

Salut !! Désolé pour le retard, c'était un peu la course ici. J'ai ajouté aux fichiers de téléchargement du modèle un fichier nommé 'Snake Diagram' (il fait moins de 1 Mo). À l'intérieur, il y a une image avec chaque serpent d'une couleur différente, montrant également où chaque serpent doit s'insérer dans le bloc.

Hello, merci beaucoup au top !!!!

Hello!! The 50% discount works on all models on Cults3D. Just grab the code on the welcome page and apply it to your purchase here :)

https://baalite3d.com/drolta-tzuentes/?srsltid=AfmBOopE50RiVwhWVKbZ9VsD3FZEiNGddqUex3ikxIuzJDKisFZKoV5K is this site not connected with your Patreon discount I was looking to buy the figurine model if the discount was available

The discount is only for my models. The one in the link is by Peachfigures, so it won't work.

Hello! I’m not at home at the moment, but the total size of the piece is close to 33 cm. At a 1:6 scale, it would be 33 cm if it were standing upright, so I believe it’s a bit less than 33 cm in the way it is now. If you want the exact size, I can get back to you later when I have access to the computer.

No problem! Thank you so much

Hello!! I’m really happy you liked it :D, right now I’m working on Invisigal, you can follow the progress on my Instagram, I keep posting parts of her there (@LA3Design_X), for now I don’t have plans for the next character yet, I was thinking of doing a poll among my followers, but we could also think about a double sculpture of them :)

If you do make a double statue of them, I would gladly pay for the price of two maybe even three of your statues. It would be amazing, i know it would look just as good as all of your other pieces!

Thank you so much!! I'll finish Invisigal first and then check properly, but it should work out :) really appreciate the love!

Just saw your invisigal and it looks incredible! Definitely my next 3d print project! Did you happen to figure out what your plans are for your next one? Thanks for all your hard work!!!

Thank you so much for the kindness! I’m waiting for the people on Patreon and Instagram to choose, but it’s between Sonar and Malevola :) btw I love Sonar haha

Hello! I checked the file using Lychee, and all the parts are okay. The names are indeed a bit messy, and I apologize for that, but all the parts are included in the file (just ignore the names). As for the size, it depends on the printer you use—you can cut it directly in the software you use for printing when needed to adjust it. However, I’ve already made the cuts for you. I’ve uploaded a new version (V2) with the name corrections and additional cuts to make it printable on a Saturn 2. It has dimensions quite similar to what you mentioned, and I believe it should fit your printer now.

Hello! Did you print it at the original file scale or did you make any reduction? I’m in the middle of a project, but I’ll try to do something to help you—just let me know what size you printed, and I’ll try to adjust it to make the parts thicker.

im using resin elegoo saturn 4 16k i printed at 100% just as the file comes. the chains the cape and those parts are very very thin. thats basically it if you can thicken the body parts it would be prefect. even the crown mask thing the pointy ends break off very easy. i ry many times and was extremely careful but no matter what it would break off when removing the supports

Got it! I don’t know if you saw, but I’ve already released a new version where I thickened all the clothes, chains, and wings. I also combined and changed the shape of the cape and the upper part of the cape; now it’s a single piece. The only part I didn’t change was the crown—I didn’t think it was breaking. I have it printed, so I thought that part was fine, but I’ll soon upload an additional crown file to Cults as well.

Added the crowns as a additional file to cults, now we have the V3 version and the additional crown file added.

nice thank you so much. i truly appreciate it i will be buying a few more model from you as well. arcane ones

Hi! Which model are you asking about? Just so you know, all Fan Art models are cut to make printing easier. :)

the devil may cru ones, specially white rabbit

Yes, everything its cutted :)

Hi! Yes, I can sell Viktor separately. Would it be Viktor and the Staff only? You can print just Viktor from that same file here. Anyway, if you could tell me more about what you want, I'll figure it out. This way, I avoid doing something wrong. :)

Oh, I see, thanks. Honestly I'm beginner so I'm just figuring out everything. I will just buy this file and print Viktor separately then(I don't have enough space for the staff on my shelf). Is there any chance you will have Jayce or maybe something with both of them in future?😊

Stuff* background I meant.

You can resize the parts when you print by selecting all parts together and resizing everything. If you have any trouble, just message me :) Yes, I will create Jayce in the future. The next release will be Katarina.

Thank you so much, I'll probably wait for Jayce and buy them together later:)
I really love your version of Viktor

Hello, yes, I can do that. I will upload the file of the stick in the next few minutes. I have cut it into 10 parts to make it more affordable to print. The size I used for the cosplay is 1740mm, which is Viktor's height. You may need to cut it into more than 10 parts to print at this size. I will upload it here soon.

Thank you, the total length I need is 2000mm +/- so I'll make the distance bigger and cut it.

Hello MHDesigns, I think you can do that without any problens, the dice that comes with the model have been made with the real size so reducing to 85% I can pass this dice without any stucks, I thinks its ok to reduce, I not tested this after print but in 3D the mensuring its ok. thanks for your purshase, have a good day :)