I am a 3D sculptor. I mainly enjoy creating cartoon characters. If you want a specific character, get in touch. I might be able to help.
👋 Hallo zusammen! Dieser Thread ist öffentlich, also lasst es uns nett und respektvoll halten. Keine Werbung, kein Spam oder unangenehme Dinge!
🇧🇷 Benutzerland: Brasilien
🌐 Bevorzugte Sprache des Mitglieds: Englisch. Sie können online über DeepL übersetzen.
💡 Beziehen Sie sich auf ein bestimmtes Modell? Fügen Sie den Link, den Titel oder die Modellnummer hinzu.
🖼️ Möchten Sie Fotos einstellen? Verwenden Sie einen kostenlosen Host wie ImgBB und fügen Sie die Links in die Nachricht ein.
✍️ Schreibtipps: Verwenden Sie das Markdown-Format, um Ihre Texte zu strukturieren und lesbarer zu machen.
im trying to print the mickey donald and goofy figures, and see all the files except the sign. it has the file for the sign base, but no sign.
Hi, its in the "UMesh_PM3D_Cylinder3D1_1_SubTool7.stl" file.
Hi, i can´t download the mouse i bought. could you please provide it elsewhere?
Hi, it´s also avilable for download here. https://www.thingiverse.com/thing:7183636
Hello,
It is possible to have the printed size of this model.
thanks
wich one? Just remember that you can adjust the size of any model in the printer slice program
Hola te hago una consulta sos diseñador?
Hola, no. Solo hago algunos modelos como pasatiempo.
¿Quieres algún modelo en concreto?
Hola buenas noches, acabo de comprar el archivo y no me aparece, me vuelve a saltar que lo tengo que volver a pagar
Hi, wich file did you purchased? Are you also the user milioliveraaa? In my list apperas that milioliveraaa bought the silhouette 3d print.
Hello, did you post this doll? I preferred to make it in parts. I want to tell you that the head DOES NOT fit into the helmet. I had to apply a lot of heat and try to mold it... And cut one side. The torso also doesn't fit into the legs. But well, it was less difficult... And, I'm printing the legs for the third time. The sneakers don't come out.... The feet end up being too short. I'm letting you know so you can correct it. I don't know if your work has a "warranty," but well, it's not right.... Thank you very much.
Good afternoon, well a few questions, can you add bruce wayne and alfred from batman animated series, and What Will be the cost?
Hi.
Ok, I´ll keep them in mind for my next project. Probably 3 USD each.
Ok sir
Thx very much
Hi, Purchased this model but size at 100% is MASSIVE.... Even at 15% it wont print in Resin??
I bought Tinkerbell and periwinkle but tinkerbell doesn't want to work... 😫
Hi, What kind of error do you received?
Is it posibel to get permission to sell the models I print of your designs.. ?
Merry Xmas to you
hey bud, your reaper model is really broken, well on Prusa it is
Did you received the message the highlited areas indicates either missing or extraneous surfaces? You tried to slice anyway?
Well, I tried to make it more solid, try to download it again and see if it worked. Sometimes this error message appears but you still can print the model.Thx for the info..
Estoy usando Cura y daba error en una de las figuras. Me envías el archivo arreglado?
En el archivo de la postura de yoga de dos figuras, una de las figuras presenta un error de código. En la zona de la cabeza de la figura.
Martin Simpson por favor
Can't figure out the best way to support the head of Belle for printing
Hi. I usually print the head upside down, so the supports stay in the hair who have less detailes. after that I just polish where the aupports were
Hi,
Habe die Datei gestern gekauft, leider ist das Gesicht von periwinkle sehr schlecht verarbeitet, gibt es eine Möglichkeit, das etwas glatter und feiner zu machen?
Liebe Grüße Jenny
Hey, ich werde die Datei ändern und sie bis morgen hier ablegen, okay? Die Dateigröße wird etwas größer sein.
Ola, vou modificar o arquivo e posto aqui até amanhã, ok? O tamanho do arquivo ficara um pouco maior.
Hallo, ich habe die Charakterschnitte überarbeitet und die Menge an Details ein wenig erhöht. Grüße.
Hi, I redid the cut parts and increased the amount of detail a little bit. Greetings.
Good afternoon, well a few questions, can you make a 3D design from a picture, and What Will be the cost?
Hi, unfortunately I'm not good at making people likeness. Anyway, thanks for the message. Greetings.
bonjour, petite question
si je souhaite imprimer mickey fantasia complet en une fois, à quel pourcentage dois-je l'agrandir pour qu'il soit a la bonne taille pour les autres éléments tels que le support ou l'arc de lumière ? car sous cura mickey full s'ouvre en tout petit
Salut, j’ai renvoyé le fichier 3D. Je crois que le support et le rayon sont de la même taille que Mickey maintenant. Tout problème, faites-le moi savoir. Merci
Hi, I sent the 3d file again. I believe the support and the ray are the same size as Mickey now. Any problems, let me know. Thank you
merci pour votre retour, mais est-ce normal que lorsque j'augmente la taille des différentes pièces cura me signale que des surfaces manquent ou sont étrangères ? désolé je suis novice en impression 3d, j'apprends ...
Bonjour, y a-t-il une partie de la pièce qui n'est pas en dehors de la zone d'impression ?
Peut-être que si vous mettez chaque pièce séparément, cela fonctionnera. Impression d'une partie à la fois.
Je l'ai essayé sur Ultimate Cura 4.5.0 et cela a fonctionné.
Voyez si lorsque vous le mettez sur le remède, aucune zone ne devient rouge. Cela signifie qu'il se trouve en dehors de la zone imprimable.
Hello, is there any part of the print outside the print area?
Maybe if you put and slice each piece separately it will work. Printing one part at a time.
I tried it on Ultimate Cura 4.5.0 and it worked.
See if when you put it on the cure any area doesn't turn red. This means it is outside the printable area.
Ola, será que alguma parte da peça não esta fora da area de impressão?
Talvez se você colocar cada peça em separado funcione. Imprimindo uma peça por vez.
Eu tentei no Ultimate Cura 4.5.0 e funcionou.
Veja se quando voce coloca no cura alguma area não fica vermelha. Isso significa que está fora da área de impressão.
thanks mate
Bonjour
Merci pour le suivi
Cordialement
The model is far from suitable for printing. Needs a lot of work. A sheer disaster
thank you :)
Thanks :)
Bonjour
Merci pour le suivi
Cordialement
Do you have a woodpecker and jubileu in 3mf? I bought and its hard to put colors on bambustudio, because is in STL
Oi, acho que vc tabém é brasileiro, né? Eu vou tentar salvar nesse formato e coloco aqui. É um formato que eu nunca usei, não sei se funciona bem.
Sou sim, estou usando o bambu studio, já quero imprimir as peças nas cores, depois irei compartilhar aqui como ficou.
Eu enviei os arquivos em formato 3mf. Veja se deu certo. Nunca tentei salvar nesse formato. Abço.
Obrigado, irei testar.