Automotive Culture
Design Studios
"All my designs are for personal use ONLY unless we reach an agreement"
👋 Hallo zusammen! Dieser Thread ist öffentlich, also lasst es uns nett und respektvoll halten. Keine Werbung, kein Spam oder unangenehme Dinge!
🇸🇰 Benutzerland: Slowakei
🌐 Bevorzugte Sprache des Mitglieds: Englisch. Sie können online über DeepL übersetzen.
💡 Beziehen Sie sich auf ein bestimmtes Modell? Fügen Sie den Link, den Titel oder die Modellnummer hinzu.
🖼️ Möchten Sie Fotos einstellen? Verwenden Sie einen kostenlosen Host wie ImgBB und fügen Sie die Links in die Nachricht ein.
✍️ Schreibtipps: Verwenden Sie das Markdown-Format, um Ihre Texte zu strukturieren und lesbarer zu machen.
Hey, i was googling things and i found an old link to m technic grill badge that you used make or have the file to. I see you still sell the file to the ashtray cover. Do you still sell the file for the grill badge? Also how is the back side? Are there nutserts for a stud to go in? Thanks Marc...
Hello, I have a question about the BMW E30 ASHTRAY COVER FRONT, is this a cover that comes over the original cover or does it replace the original part, which has many deflections/metal springs on the underside for the tilting mechanism? Kind regards.
Hi, ís the left E46 gauge still available? Thanks
Hey is the E46 mid gauge still available? If yes I would like to buy it
me too!
Hi looking to buy the file for your e60 boost gauge vent holder
Buenas tardes
Tras comprar e imprimir su artículo, el diámetro interior para el reloj no es de 52 mm, si no de 51, pudiendo variar arriba abajo además 0,25
Dear cutomer, inner the diameter was 51.5 mm so that the gauge fit and did not fall out. I added an update for you with a 52 mm. Check it out.
Hi, Where can I Found the update. Thanks
update is on my page where you downloaded model
Tienes más diseños para seat leon mk1
Dear customer, we have available three designs for Seat leon mk1. Please check them out on our main site.
If you have request for another one, please be more specific and we can take a look at it.
Me gustaría la parrilla central y las laterales de facia al igual que los neblineros de mk1 cupra
I will implement creating fog lights desing into future plans
hello, i want to buy the cupra logo but i wanted to ask u the dimensions of the base plz ?is it the same that the original ?TY
Dear customer, dimensions are just indicative. It is meant so that everyone adjusts the dimensions in CURA according to their own ideas, because it also depends on the type of assembly you choose (it is also possible to cover the existing logo with a new cupra emblem, for example). The black plate of the model have dimensions -> 85x95mm
Yes i know but the size of the logo part cant be too big xd. But this size is cool, I will buy it ! TY
Hey there, I realized that the BMW E30 - BMW M TECHNIC EMBLEM was larger than the original emblem, Will it be possible for you to make it smallr and shorter to match the original OEM part?
Dear customer, thank you for your feedback. This emblem is completely custom and was not suppose to be the same as "original".
I can scale the stl file according your needs, but i dont have the original emblem and its dimensions. You can tell me by what percentage I should reduce the model.
But what I suggest is that you adjust the size (%) yourself in your slicer and see what fits your car best.
Is the centre gauge pod for the E46 compatible with both LHD and RHD?
Dear customer, yes gauges are compatible for both versions.
The print file of E46 gauge pod is completely different from the photos, it looks terrible and amateurish. I do not recommend it!
Dear customer, thank you for your feedback. I don't understand how the product can be different, when a preview of the 3D model and real photos from the print are available. Please write me another message so that we can solve this problem.
BMW E30 ASHTRAY COVER FRONT
Does it fit on the original cover? Or do you just put this instead of the original?
Dear customer, thank you for your question. This model is based on the original piece, but only the top part (as you can see on preview). All joints and mechanisms are not modeled. This model can be used as decoration piece or ashtray delete cover.
The parte doesn't fit right on the gauge and the original rim.
Dear customer, thank you for your feedback. All the models I advertise have been tested by me and fit 100% (see attached photos). The problem with fiting can occur with other materials used (tension, shrinkage,...) and printers. Please adjust the settings of the printer and the material.
Hello, is this gauge pod angled towards the driver? I want to use 2x in Rhd car, but want to make sure it doesn't point into the wrong side.
No angle
Compre este diseño y no está muy bien echo. Al poner la pieza plateada en el filo, entra mal. Entra a presión y en mi caso la pieza cedió y se rompió. La idea está bien echa pero no está muy bien desarrollada
Hi friend .. wanna do a GaugePod vent for Ford Focus Mk1 to? 😁
hello you have a honda del sol cup holder?
See my designs
was but gone, can you share?
Oh, you're right. I don't know why it disappeared from there. I've already contacted cults support.
If you want the part now, contact me at pstros213@gmail.com and after transferring the money to paypal I will send you the model.
Hi, can you please prepare version of focus mk2 vent for 60mm gauge? Is it possible? Thank you for answear.
Yes, ofcourse. Text me on my email pstros213@gmail.com
Hello. I have a problem. I accedentally bought wrong gauge vent 3d print file, bmw e46 file, but i do not have any use for it, i dont event have that car, i thought it was for different car and secondly i wanted to try and put 52mm gauge in it and it does not fit, so a cant even modify it, it is possible to get refund for it ? It would be awesome.
Diameter of hole is 52 mm as you can see on my screenshot attached. Fix your printer please. (https://ibb.co/dcN7hym)
hi its placing the model upright in my slicer how do i lay it flat, i carnt edit it thanks
What slicer? I recommend cura
3d create and print, its a vector v3 printer, its actually not printed a small version to bad, could you also send me updated stl with exact 52mm thanks
Check the files again. There is 52 mm version
The size is not good ! Instead of 52mm 51.2
plan is also 51.2, bad
Text me on my email pstros213@gmail.com with your desired diameter and i will send you modified stl
Ok, thanks
Hola buenas, estaba buscando cosas en Google y encontré un enlace antiguo al soporte para manómetros de bmw e46 que solías crear o cuyo archivo tenías. Veo que aún vendes el archivo a la tapa del cenicero. ¿Aún vendes el archivo del soporte? Gracias y un saludo.