Diseñador español.
Me gusta el anime y los vídeojuegos y disfruto creando las armas de los personajes.
Si quieres algún prop de alguna serie, película o vídeojuego no dudes en pedirlo.
Sígueme en mis redes sociales.
👋 Hallo zusammen! Dieser Thread ist öffentlich, also lasst es uns nett und respektvoll halten. Keine Werbung, kein Spam oder unangenehme Dinge!
🇪🇸 Benutzerland: Spanien
🌐 Bevorzugte Sprache des Mitglieds: Spanisch. Sie können online über DeepL übersetzen.
💡 Beziehen Sie sich auf ein bestimmtes Modell? Fügen Sie den Link, den Titel oder die Modellnummer hinzu.
🖼️ Möchten Sie Fotos einstellen? Verwenden Sie einen kostenlosen Host wie ImgBB und fügen Sie die Links in die Nachricht ein.
✍️ Schreibtipps: Verwenden Sie das Markdown-Format, um Ihre Texte zu strukturieren und lesbarer zu machen.
Does the hylian shield from twilight princess come with an uncut version of the shield? So that it can be modified slightly?
At the end of the images you can see a 360° view of each model that makes up the bust
I have a question if the kokushibo sword has like the V2 version of it being able to sprout out the little blades like in the manga?
Hi what's the smallest printer that can print the she-ra sword?
The tallest pieces measure 20cm
would wooden dowels work for the demon slayer katana's?
The model is designed for a 4mm rod, if you create 4mm wooden rods it should work.
I was hoping you would be willing to make a Mega-armed Tokisada from No Guns Life mask and hand revolver. Please let me know how much this would be to make
If you want me to create a specific model, let me know on Instagram and I'll see about it. Greetings.
What is your Instagram name?
The link to the Instagram logo should be in my profile description.
Question, do the demon slayer katana's have like built in connectors? to assemble? or are the two prepared cylinders can be used to assemble the blades? or just used to keep thr katana in the base
I designed the katanas to fit a 4mm diameter rod. I explain the type of attachment in the description of each one; Obanai Iguro's is the only one that's different.
Will u ever make Michikatsu's katana? Kokushibo's when he was still Human its a purple blade basically like yoriichi's
Hi,
I have purchased your design because in pictures there are inscriptions on the sword, but in reality there is non. This design was free everywherei but i have purchased yours because you are showing incription on Obanai katana, can you please reimburse my money?
If you turn the 3D model over you might be able to see the engravings.
Hi,
I have purchased your design because in pictures there are inscriptions on the sword, but in reality there is non. This design was free everywherei but i have purchased yours because you are showing incription on Obanai katana, can you please reimburse my money?
Dale la vuelta al filo, quizás eso te ayude a verlo.
(MASK NIGHTWING REBIRTH 1.0)
Hello dear Creator, how are you?, I hope you are well!
I would like some information if you could let me know, I would be grateful.
What are the dimensions of the file and how much material is used in printing?
This is the design number(80790)
İ likes your design and wanna make cosplay from it. Can you help me to make the right size for my head?
Hola buenas. Me gustaría comprar el diseño de estrella fugaz de kingdom hearts 3, la llave espada. Podría ver como queda impresa porfavor? Es que me parece preciosa y se la quiero hacer a mi mujer, ya que es su llave espada favorita pero no me acabo de hacer a la idea como queda una vez impresa. Muchas gracias y gran trabajo.
Hola, ponte en contacto conmigo por Instagram si puedes.
Hey, I would reeeally need the mirror of twilight from the midna 3D set for a cosplay. Is it somehow possible to just purchase the mirror? Maybe for half of the price?😭🙏🏻
Hello, sorry in advance for asking in English. This is just a curious question, not intended to offend you. I'm interested in buying the Nakigitsune Mask (97687) file but I noticed that it's more expensive than the other file that you uploaded.
1) Is it more expensive because someone requested that you make it?
2) Because it is requested by someone, is it okay for me to buy the file? Is it only intended for the requester or other people can buy it?
and another weird question:
3) Is it more expensive because it's difficult to print?
Sorry for all the weird questions. I'm new to 3D printing for props. I love all your works!
The price is due to the difficulty of the model, and that model was made to order and allowed to upload to cults in order to make it profitable and make it cheaper than the exclusive design price.
Hello , a question regarding the KATANA OF SATSUKI KIRYŪIN FROM KILL LA KILL , I can see there is a hole in the katana , can I please know what can I put inside the katana hole to make it sturdy? preferably something which can be 3d printed :)
The model is designed to insert a 4mm diameter rod, even so I have added a rod model so that it can generate the 3D printing couplings.
Can you please make the inserted 4mm diameter rod printed specifically for this project ? I'm very new to 3d printing and I struggle to understand where can I find one :)
Yes, I have added some small rods so you can use them as hooks
Hey it looks like your scythe files don't have the individual .stl file included for the tip of the bottom. Can you possibly send this as an individual file? It appears with all the other pieces in the "Punta" file, but I need it by itself like the other pieces.
Buenas! Me gustaría realizar un par de figuras y quisiera saber si aceptas encargos y de ser asín tendrías algún correo al que pueda contactar? Un Saludo y 🙂 gracias!!
Hey I was needing a sword made
If you want to propose a project to make the stl, contact me by private message on Instagram.
Hola, descargué su modelo y me gustaría saber como unir el filo. Solamente tengo que imprimir una varilla para unir los filos en cada parte?
hola, en la descripción pone que "el filo se une a partir de 5 tacos de 3 cm X 6mm" esto se debe a que la fuerza del taco será mejor y evitara la rotura mejor que una impresión 3d, puedes encontrar los tacos en cualquier ferretería, por si acaso te dejo un enlace a aliexpress.
https://es.aliexpress.com/item/1005005042518642.html?src=google&src=google&albch=shopping&acnt=439-079-4345&slnk=&plac=&mtctp=&albbt=Google_7_shopping&gclsrc=aw.ds&albagn=888888&isSmbAutoCall=false&needSmbHouyi=false&src=google&albch=shopping&acnt=439-079-4345&slnk=&plac=&mtctp=&albbt=Google_7_shopping&gclsrc=aw.ds&albagn=888888&ds_e_adid=&ds_e_matchtype=&ds_e_device=c&ds_e_network=x&ds_e_product_group_id=&ds_e_product_id=es1005005042518642&ds_e_product_merchant_id=538549939&ds_e_product_country=ES&ds_e_product_language=es&ds_e_product_channel=online&ds_e_product_store_id=&ds_url_v=2&albcp=20280463591&albag=&isSmbAutoCall=false&needSmbHouyi=false&gad_source=1&gclid=CjwKCAjwjqWzBhAqEiwAQmtgT4XAeFveUBk8YzAmZ1HLJ2eHiM-L4XRG2pF4kT8wUc7jyKCTIQkRTBoCpGQQAvD_BwE&aff_fcid=c2928d3579d54a0fa642a1118b6c5635-1718258467381-00476-UneMJZVf&aff_fsk=UneMJZVf&aff_platform=aaf&sk=UneMJZVf&aff_trace_key=c2928d3579d54a0fa642a1118b6c5635-1718258467381-00476-UneMJZVf&terminal_id=f62aab538fc24de9add63c71faafc842&afSmartRedirect=y
Hola, descargué su modelo y me gustaría saber como unir el filo. Solamente tengo que imprimir una varilla para unir los filos en cada parte?
Hello! I was printing the scabbard portion of the Sakabato from Rurouni Kenshin 2023, but noticed the middle section is solid and does not have a cut out for the blade to go into.
I just updated the model, sorry for the inconvenience
Perfect! Thank you! I will be printing the middle portion tomorrow. Currently printing the other two portions
hola, como estas? tendrias los parametros de impresion? la estoy imprimendo en una ender 3 neo uso Cura. Va bien pero cada pieza me tarda 14 hs aprox con la configuracion que tengo. Hay forma de hacerlo mas rapido? desde ya muchas gracias. si necesitas te lo consulto en ingles. Un abrazo grande.
Hola, una opción que puedes probar es a utilizar una boquilla de 0.6 si la consigues eso reducirá mucho los tiempos. Otra opción, si utilizas cura es usar el relleno "rayos" con un grosor de pared de 3 líneas. las 3 líneas provocaran que el modelo sea resistente y el relleno en rayo provocara que se genere el relleno como soportes. De esta manera ahorraras en material y en tiempo. Estas dos opciones yo las suelo utilizar mucho para ganar tiempo de impresión.
Hi, i dl the Juzo Inui head, When I looked at the CAD file, I noticed that the proportions weren't right, the holes were oval,not round.
Yes, the ovals are not noticeable, even so I just updated the format in case you don't agree with me, I have also updated the model with a head so that it is easier for you to scale the model to yours. Sorry for the disturbances.
Hello. I am currently working on the Yoriichi Katana. One of the holes for connecting blade to the handle has the rod going through. I can't use the regular plugs "pasador" for that hole. Would you be able to make a plug for that hole?
Sorry for the delay, I have already prepared that split piece so that it fits well into the interior.
Love the models and I'm wondering if you take commissions! I've been looking for Cinnamon from Nekopara all over but it seems nobody likes her enough.. ::sadpanda::
I could propose the project; if you can, send me a private message on Instagram and I'll see about making it happen :)