thanks and good new yaer
- 0 likes
👋 Hallo zusammen! Dieser Thread ist öffentlich, also lasst es uns nett und respektvoll halten. Keine Werbung, kein Spam oder unangenehme Dinge!
🇰🇿 Benutzerland: Kasachstan
🌐 Bevorzugte Sprache des Mitglieds: Englisch. Sie können online über DeepL übersetzen.
💡 Beziehen Sie sich auf ein bestimmtes Modell? Fügen Sie den Link, den Titel oder die Modellnummer hinzu.
🖼️ Möchten Sie Fotos einstellen? Verwenden Sie einen kostenlosen Host wie ImgBB und fügen Sie die Links in die Nachricht ein.
✍️ Schreibtipps: Verwenden Sie das Markdown-Format, um Ihre Texte zu strukturieren und lesbarer zu machen.
Schreibe deine Nachricht:
6 Kommentare
I purchased your mara jade blaster. While the parts seem correct, I want to print the full blaster but the handle is smooth on one side instead of having the lines on both sides like the parts. Can you please fix it and make the full blaster available?
- 0 likes
Yes, sorry. We have re-uploaded the corrected model.
- 0 likes
Thanks, but my resin printer is not happy with the hollow cavities...is there a solid version available?
- 0 likes
Added 3 solid files
- 0 likes
Hola,
por casualidad dispone de alguna imagen de ensamblaje de la pistola del joker? tengo algunas dudas de donde van montadas algunas piezas.
muchas gracias
saludos
- 0 likes
Hi! This should help -https://myhub.autodesk360.com/ue28ab9d8/g/shares/SH286ddQT78850c0d8a4d841b3e46e72dd1e There is "explode" button at the bottom which will help to see where each part goes.
- 0 likes
I was looking for the same thing and that link doesn't work anymore... Any help would be appreciated. Thank you
- 0 likes
Hi, here is the fresh link - https://a360.co/3HIBJxc
- 0 likes
а вопрос можно кинжал темного вместе с подставкой идет в комплекте или нет
- 0 likes
Hello! I purchased your file for Jyn Erso's tonfa and most of the printing went ok, but on the two main pieces, the 3 outermost columns of studs shifted up and over a few millimeters. The shift was in exactly the same place for both halves! I cleaned, tightened, and leveled my machine, and double checked the slice file to make sure I didn't see any glaring errors and I am coming up short. Have you had any feedback like this on this file? Any suggestions on how I might resolve this error?
- 0 likes
Hi! There is a high overhang angle and there is a high probability that layers closer to the top start to warp and nozzle can smash it and it will lead to layer shift. There is several solutions, each one or all together can help: you need to get rid of warping, so lowering temperature and speed + maximum layer cooling should help. Also i used supports from 45 deg. and set distance between supports and model to 0.3 mm, it helped to reduce warping on overhangs too.
- 1 like
I will tinker with these settings, thank you so much for the help!!
- 0 likes
Hi! i bought and print Zero's gun, but the model appear missing few filaments and the project too say the file have missing part, I have the screen where it say were they are. On bambulab it say nothing but as soon as i open cura it show them (i tried two time to print anche the problem is the same!), i can sen you the screen just in case, but can you please fix it so i cane print the correct one? i'm using the already assembled one (and anyway it's a really beautiful work! loving it!!)
Hi, please, send the screen to antsht@gmail.com to see what parts are broken. Btw, I use Orca slicer and it shows no errors, all parts are ok.