I'm a Hard Surface 3D Modeler with a great love for Plastic Models Kits, Giant Robots and Tabletop Wargames. Follow me on my journey to create the most devastating warmachines the galaxy has ever seen!
👋 Hallo zusammen! Dieser Thread ist öffentlich, also lasst es uns nett und respektvoll halten. Keine Werbung, kein Spam oder unangenehme Dinge!
🇬🇷 Benutzerland: Griechenland
🌐 Bevorzugte Sprache des Mitglieds: Englisch. Sie können online über DeepL übersetzen.
💡 Beziehen Sie sich auf ein bestimmtes Modell? Fügen Sie den Link, den Titel oder die Modellnummer hinzu.
🖼️ Möchten Sie Fotos einstellen? Verwenden Sie einen kostenlosen Host wie ImgBB und fügen Sie die Links in die Nachricht ein.
✍️ Schreibtipps: Verwenden Sie das Markdown-Format, um Ihre Texte zu strukturieren und lesbarer zu machen.
Hello!
I am currently printing the DeamonSlayer-Knight MKII Multipart Kit.
Which hand should I use for the hammer? There is one for the sword, etc., but not for the hammer. The instructions don't mention anything about this either.
Do you have more information about this? I would like it to be exactly like in picture 1, with an extra weapon in the right hand (in addition to the hammer).
Thank you very much <3
Hello there and thank you for your support.
The swords and hammer all use the same hand/hilt so if you want to put the hammer in the right hand you'll have to use the "Hand_Sword_Hilt_R" part and if you want your hammer in the left hand you'll use the "Hand_Sword_Hilt_L" part.
Just keep in mind that Left(L) and Right(R) indicators on part filenames are assigned with the model facing you and not relative to the model.
Let me know if you have any more questions.
Im having a really bad time with the DeamonSlayer-Knight MKII Multipart Kit Presupports constantly failing on my saturn 4 ultra due to the bottom platform support, is there any way that you can make a bigger platform version or walk me through a successful print? Im using chitubox pro for reference
Hello and thank you for your support.
Have you tried increasing Exposure Time on your bottom layers? I'm not a printing expert but I use 15sec Bottom Exposure Time on my Photon Mono and have difficulty getting them of the plate.
If you don't want to play with your printer settings you can open the supported model in Chitubox, on the supports tab select "Heavy" to add a big Raft and then decrease "Z Lift Hight" to 0 to make the supported model to sit on the Raft.
Chitubox 2.x will require you to add at least one support to let you slice or save the model though.
I hope this helps. Let me know if you have any more questions.
I have purchased the set and in the Lyche Slicer I get errors in the files
DeamonSlayer LOWER_TORSO_v1.2.stl
DeamonSlayer_Blade.stl
DeamonSlayer WAIST_PLATES_v1.2.stl
DeamonSlayer_Hilt.stl
DeamonSlayer SHOULDER_PLATE_L_v2.1.stl
DeamonSlayer CHEST_PLATE_v3.0.stl
DeamonSlayer SHOULDER_PLATE_R_v1.2.stl
Can I please get these files error-free?
The repair worked partially, but not for all files. The rest is error-free, so I would like to have everything if possible.
Hello, thank you for your support.
If you load the files in Chitubox you'll see that they appear fine but you can support and print them in any slicer.
Lychee seems to be less tolerant to complex topology and multiple shells so the parts may appear to have errors but you can support and print them without having any problems.
All files in this set have been test printed multiple times by me, my clients and my licensed resellers, so I can guarantee they will print.
Please let me know how it goes or if you have any more questions.
Hi Antonis,
I've been looking at your "DeamonSlayer-Knight MKII Conversion Parts".
Is it possible to get the conversion kit to include the different helmet options or would i need to get the full pack (would that work or are the files different)?
Hello, the "Conversion Parts" only contain the more popular head option from the 2 of the "Full Pack" to keep the cost of the "Conversion Parts" as low as possible. If it's only the head you're looking for send me an email at antonis.bouras@gmail.com and maybe we can work something out.
Hi, to be honest there are alot of cool elements in the full file so I may just do that.
Can the full set also be used for conversions or are they different?
Your work is awesome btw
Thank you for your kind words! You can still use most of the parts in the full kit but the waist area (plate_belt and lower_torso parts) will require a little more effort because these parts of the Conversion kit are cut differently to better fit the plastic kit. If you choose to go for the full kit let me know if you have trouble making those pieces fit.
Credit where credit is due :). I will let you know how I get on.
Hi Antonis,
I've been looking at your "DeamonSlayer-Knight MKII Conversion Parts".
Is it possible to get the conversion kit to include the different helmet options or would i need to get the full pack (would that work or are the files different)?
Hello, the "Conversion Parts" only contain the more popular head option from the 2 of the "Full Pack" to keep the cost of the "Conversion Parts" as low as possible. If it's only the head you're looking for send me an email at antonis.bouras@gmail.com and maybe we can work something out.
bonjour votre fichier m'interesse puis je avoir la notice d'assemblage pour voir ce que cela donne
Hello, I used Google Translate to read your question since I don't understand French so I hope I understand correctly what you're asking. All models have pictures or renders of the completed model in their product description so you can see how the model looks like when printed and assembled. Also all models come with building instructions. Maybe I can send you a link with the instructions if you tell me which model you're interested in.
Hi! I really like you models and am going to make a 'golden banana janitor' army with them. Do you have plans for a 'big golden robot with giant shoulders' kind of design?
Please keep up the good work!
Thank you for your kind words and your support! A big golden robot is on my to do list but I'm still in the middle of a few other projects so it will be a while till I get to that.
Hello I really like the Demon Slayer Conversion Kit. I have seen photos on the website for the instructions with a different version? Where would I be able that version if possible. I would wanna mix the two kits for a unique look. Thanks!
Hello, thank you for your interest in my work. The only Deamon Slayer kits available from me are the ones on my page here. There was an older version of my kit that a certain miniatures company didn't like how it looked, so it is no longer available. There is also another variant made for the physical store of PopGoesTheMonkey that I work with, but that was made by another artist so it's not available by me. Could any of these versions be the one you are referring to?
hi arma
I bought the full kit of your magnificent DeamonSlayer-Knight #not a baby carrier :)
but I don't know wich one I have to print for only the conversion :/
can you help me ?
Thank you for your kind words and your support! Ideally you would need the "DeamonSlayer-Knight MKII Conversion Parts" because some of the parts are cut differently to better fit the plastic kit. You can still use most of the parts in the full kit but the waist area will require a little more effort. You can email me directly just by clicking on the mail icon on my profile and I'll send you the comprehensive list of all the parts you have to print and some instructions you might find useful.
Hello, is there any way to get the daemon slayer - knight shield? I have the conversion kit but wanted to add a shield but i cant seem to find it anywhere
Hello, the Shield is included in the full kit, the conversion kit includes only the parts shown in the products photo. If you still need the part you can email me directly just by clicking on the mail icon on my profile.
Just picked up the samurai dreads and they are really well done. I'm getting them ready to print as I type this. Was wondering if there was any chance you will be expanding the Samurai theme to additional models. I am putting together an Eternal Dynasty army for one-page rules and could use some more space themed samurai.
Thank you for your kind words, I'm glad you're enjoying the files! I'm currently putting together an Assault Mech with redeeming qualities ;-) and I'm planning on doing samurai and spartan versions as well. Love OPR, I've been enjoying their rules for some time now!
Hello. The Deamon Slayer Dreadknight is spectacular! I don’t have access to a printer. Do you print the figures for direct sale? If so, how much would you charge? Thanks.
Hello, thank you for your kind words. Unfortunately I don't print for direct sale but you can get my kits from the SpikeyBits store or from PopGoesTheMonkey who are both licensed resellers.
Thank you so much. Be well!
Hey mate, just wanted to ask, will you be working on Imperial Knights conversion parts in the future? I'm very keen to start a Samurai one and I really love your Samurai Dreadknight designs. Thank you for your time.
Hey, I never thought about doing Imperial Knight conversion parts. Sounds like a great idea but unfortunately it won't be anytime soon since I already got my hands full.
the optional neck piece is not inside any of the files for the ndk conversion files, any help with this?#
Hi, the optional neck piece is available only from a specific psychical reseller, it was never a part of the original kit. If you need to print it for your self though just drop me an email and I'll send it to you. In the meantime here are some recourses in case you decide to make your build without the neck piece:
https://stephanius40k.blogspot.com/2020/02/building-better-nemesis-dreadknight.html
https://www.youtube.com/watch?v=Y0Hz9uVdtXc&t=1s&ab_channel=galharen
Hi there - do you have an email you can be contacted on?
Hello there, my mail address is right there on the mail icon on my profile, you can email me directly just by clicking on the icon.
Having issues with the conversion kit. Doesn't match the instructions.
https://ibb.co/7nXTgcV
https://ibb.co/FgfvMWb
https://ibb.co/YTNG1d8
Halp!
Hey! These instructions were made for similar conversion parts made by another artist. As it states in the items description "for the gorget/chestplate piece to fit, you will have to do some extensive cutting and remove a large piece of plastic from your original model." Take a look these two tutorials about how to make this conversion https://stephanius40k.blogspot.com/2020/02/building-better-nemesis-dreadknight.html
https://www.youtube.com/watch?v=Y0Hz9uVdtXc&t=1s&ab_channel=galharen
If you need any more help or if you have any more questions you email me by clicking the mail icon in my profile.
Thanks so much! Yes I realized I just really needed to bore out more plastic. This is awesome! Thanks so much for making this!
its going well! Got a lot of up votes on 40k subreddit!
https://www.reddit.com/r/Warhammer40k/comments/ur0wxx/dreadknight_conversion_wip_no_baby_is_best_baby/
That's awesome, congrats! Would love to see some pics when you paint it up!
Hi !
I am making a 3d print shop and i would be interested to sell your product. Can we talk about some agreement ?
Greetings,
Brennos
Hi Brennos, I currently don't have any open slots for commercial licenses but feel free to email me again in few months.
https://cults3d.com/en/3d-model/game/deamonslayer-samurai-conversion-parts
Hi, can you shrink the size to fit like space marine model? If I have to buy your file first then no problem at all.
You can reply back to my email: ridermatt13@gmail.com
Cheers
Hi I was woundering if you might be able to put something like this together for Deathwing and Dark Angels ( DEAMONSLAYER-KNIGHT MKII CONVERSION PARTS ) even a compleat kit
Many thanks
Hi there, I am only after a "Dreadknight" Weapons pack STL for the Greathammer, Sublimator and heavy phycannon. Is this something that you could do as a special for me?
Hello there, just send you a message.