Industrial Designer
I really enjoy designing, printing and assembling printed pieces. I hope you enjoy it too. Thank you for supporting me with Following, Like and download my designs!!!
👋 Hallo zusammen! Dieser Thread ist öffentlich, also lasst es uns nett und respektvoll halten. Keine Werbung, kein Spam oder unangenehme Dinge!
🇷🇸 Benutzerland: Serbien
🌐 Bevorzugte Sprache des Mitglieds: Englisch. Sie können online über DeepL übersetzen.
💡 Beziehen Sie sich auf ein bestimmtes Modell? Fügen Sie den Link, den Titel oder die Modellnummer hinzu.
🖼️ Möchten Sie Fotos einstellen? Verwenden Sie einen kostenlosen Host wie ImgBB und fügen Sie die Links in die Nachricht ein.
✍️ Schreibtipps: Verwenden Sie das Markdown-Format, um Ihre Texte zu strukturieren und lesbarer zu machen.
Hi, Love your designs. I sell 3d Printed items at a local indoor market and I am forever being asked for building toys for boys. Do you sell a Commercial license for your designs? Many thanks :) Paul
Hello, you can contact me over my email and talk about it. Than you! ( amir.m.kamyab@gmail.com )
hi, when I open the STL it shows it on its side and an error in CURA that says there is an error for extraneous of missing surfaces
HI, I checked with Cura, there was no problem. but in case to make sure, I uploaded stl file again. so you can go and try now.
hi what is the material and infill percentage for the benchvise 3?
Hi, best material is PETG and best infill is 50% and 6 wall layers
Hi, I'd like you to design a keyring for me, I'll send you a photo of the keyring. Then we could talk about the price of your work.
Hi, sure. you can send me all the information to my email: amir.m.kamyab@gmail.com
Hi, would the SCARA robot work if I use a power source of 12V 6A?
Hi, I just bought the SCARA robot and I was wondering if there is a tutorial for the assembly?
hello, thank you for buying my model. unfortunately I don't have any tutorial for assembling this robot. I mentioned in sale page that this is solid works parts of the robot, it means you can open it in solid works and see all the detail you need for assemble it.
Alright, thank you
Buenas tardes una pregunta el tornillo de banco fue realizo en solidworks?
hello, yes. it is deigned with solidworks
Could you pass me the sldprt to make the plans of the pieces?
It would be the sldprt of this https://cults3d.com/es/modelo-3d/herramientas/bench-vise-iii-travel-speed-5-5-11-22-mm-rev-with-upgrades
sorry, I am not selling solidworks parts. you can just buy stl parts over here! thank you for your understanding.
Hello, I have a question, in respect for this design https://cults3d.com/:1338947 are SLDRPT files available?
Hello, sorry I will not sale solidoworks parts
I am working on my final project for a course called mechanical design laboratory in college and it would be very helpful to recieve those files just to complement the ones I already downloaded , I dont have any intentions on selling or commercializing them; I completely understand if this is sensitive or if you have reservations, and I respect your decision either way. I just wanted to ask
hello, I want to make sure I respect you as the engineer behind these design and would like to ask you if you are ok with commercial resale of your designs if I pay for your STLs? ( Just to clarify, I'm not trying to resale the STL just physical prints of your STLs)
Hello, you can contact me over my email: amir.m.kamyab@gmail.com
Hello my friend, are SLDPRT files available for the design of a 5 DOF robotic arm?
Are you the author of this visualisation method? https://youtu.be/MOWYDw98Pd4?si=o148-TywbrpBVxFA
the lever with the thread for part A is missing - gearbox 27
el brazo robot viene con los planos, instrucciones para ensamblado y lista de materiales?
no. it is just solidworks files that you can edit and use it in any kind of 3d mechanical software.
Hi my native language is Spanish, so I'm using online translator, I would like to know if you used Arduino to program it? and if you have any advice to give me? Thank you very much!
I used Arduino uno and upload GRBL V 1.1 on it. for programming I used Universal Gcode sender.
And as for the arduino code, did you have to use the millis() function or is it a simple code?
as I remember it was mili second code.
How much is the cost of the 2D and 3D drawing files for each of the parts of the support ?
Hello, I don't understand your question. can you please explain what you mean?
The plans for each part of the support
if you mean this multipurpose stand, there is no extra cost. I saw you bought it already. so you can print and assemble it as it is explained on pictures. if you talk about something else, you should contact me over email and explain with detail what you want.
Te mande correo
hola, recientemente compre el soporte multiusos para cámara, ¿los planos de se venderán por separado?
Thank you for buying my model. the plans are available as a GIF in the model pictures page where you bought. you can take a look.
hola, respecto a la parte 1 de las piezas, ¿En que parte del soporte se supone que va? gracias.
sorry. part1 is not part of the assembly. it was there by mistake. I deleted it. all other parts are OK and you can use them.
No hay parte 9, ¿esta correcto?
yes. there is no part 9 and you don't need part 9. all the parts you need for mount is available.
¿Qué medidas para el largo del perfil de aluminio recomiendas?
for main column you can use as long as you like. but for arms it is better to use less than 18 cm
Hello, AMKDesign!
I recently purchased the Scara Robot Arm and need some support
(1) What is the size of the gt2 belts?
(2) Which microcontroller do you use? Arduino, Should You?
(3) Firmware for the arm to work
Hello, thank you for buying my design. GT2 size is 200 - I used Arduino Uno with cnc shield. firmware for the arm is GRBL and you can control robot with universal g-code sender.
thanks!
But there are two types, those that go on the arms and those that go on the anti-arm. The one on the anti-arm looks bigger than 200.
Hello, both belt are 2GT 200 mm. but it is tight a little bit.
Ok!
OK! I am going to try !
I have already printed all the parts of the arm.
How do I get the program you used??
programming is in python. you have to know python to program it.
Amk!
The largest belt is 277, I measured it. I managed to print a 276 in TPU and I will test it on Monday. But I already bought 276 on Aliexpress. Now all that's left is the code.
Where can I send you some photos, I incorporated two additional elements to the arm due to the pancake motors I'm using, they came with the pulleys already attached.
I don't have any code for scara robot arm. I were using universal g-code sender to move the robot as I remember. about belts I was mixing scara robot arm with other robot arm I have here for sale ( so because of that I said 200 mm ).
I think I bought the other one too
hola AMKDESIGN
me llamo carlos y estoy buscando un diseñador en 3d para que puedas mejorar algunas piezas de un diseño que tengo como tambien que puedas diseñar uno mejor, funcinal te interesaria ?
Hola. puedes contactarme a través de mi correo electrónico.
amir.m.kamyab@gmail.com
Hi AMK Design-- Hope you don't mind - created a couple of add ons to your clamp. Love it by the way.
You can find them here : https://cults3d.com/en/3d-model/tool/bench-vice-add-ons
I made edge covers to be printed in TPU, which are great to ensure you grip whatever you are clamping.
I also found that the clamp sometimes slipped when connected to the desk, so I made a cap to be printed in TPU for the bottom
Hope you don't mind me making add ons!
Hola, recientemente vi a tu modelo 2D de un Cubo de Rubik, considero que es increíble, y quiero pedir tu permiso para utilizarlo en el videojuego de geometry dash con la intención de recrear un cubo funcional, Gracias por leer.
Gracias por tu interés en mi vídeo. Claro, puedes usarlo en tu videojuego Geometry Dash. solo mencione mi enlace original de youtube.
hola compre tu diseño de brazo robot me pareció un proyecto entretenido. me podrías pasar la lista de materiales y si puedes una foto del ensamblaje de la garra. de antemano gracias
hola, seguro. Instrucciones de montaje y lista de materiales añadidos hace un momento.
Boa tarde qual o valor do produto
boa tarde, se usar configuração de impressão padrão, fica em torno de 300 gramas
Guten Tag? Ich habe ihren Schraubstock heruntergeladen. Beim Drucken habe ich festgestellt,dass in der Datei die Zwei Schrauben fehlen. Somit hat der Schraubstock keine Funktion.
Mfg Mirko
hello. Thank you for buying my model. I check the model just now.all the parts are there. you just need to print two times part "F"
Hallo. Vielen Dank, dass Sie mein Modell gekauft haben. Ich schaue mir gerade das Modell an. Alle Teile sind vorhanden. Sie müssen nur zweimal Teil „F“ ausdrucken.
Dear Follower, Happy New Year! I have news for you. I've joined Patreon. I'll be adding several new 3D models every week, please subscribe: https://www.patreon.com/roman_fm