221 Kommentare

Hi, can you male a front Lip for grande punto Abarth 2008, if you Need i've found a Scan of the car on internet

Hi, can you male a front Lip for grande punto Abarth 2008, if you Need i've found a Scan of the car on internet

Hey, is it possible to get the in smaller sized files to fit into my 3d printer? I can do 245x245x240mm

I have the tools to assemble all the pieces together.

Can you do the front bumper trim for a audi tts mk2 that goes around the top and side part of the fog grill

hello do you have audi 8v pre facelift headlight duct?

Hello, do you know if this would be the correct size for a 1:24 scale model? I just bought this kit and am looking to replace the rims with this style.
https://www.hubhobby.com/aoshima-06204-124-lamborghini-huracan-performante.html?srsltid=AfmBOoq_j_ggq4UwtwZYEjxfz8JtBAo7E4Z8iV6ImKe3kxwuMbWOGYgR

Hi there, I'm interested in purchasing one of your models https://cults3d.com/en/3d-model/various/audi-s3-8v2-facelift-lip-bumper-1-1

I’m planning to install it on an Audi A3 2020 (8V), but I have a concern. The front bumper on this model already has a built-in lip that looks like it’s part of the bumper itself, not a separate removable piece.

Because of that, I’m not sure if your model will fit properly or if modifications would be required.

I’ve attached some reference photos of my bumper here:

https://ibb.co/tfSpXwp
https://ibb.co/G3QTqQ6m

Could you please take a look and let me know if your model would be compatible?

Thanks in advance!

hola buenas podrias mandarme el archivo en varios trozos para poderlo imprimir?

Hi Can you draw a Cupra Leon rim?

Hi, could you also provide a model of the a pillar for an Nissan 350z?

hello, do you can help me with a 3d model of a spoiler for Honda Civic ek hatch please ?

Hi, are the canards from the TTRS mk3 100% compatible with the TT S-Line mk3?

Hello I've placed an offer for a BMW E36 hood grille, could you please take a look?

bro, do it csl front lip for bmw e46 coupe. For m-tech2 bumper. you will be bombarded with orders :D

I'm looking for the headlight deleted air vent 3D STL file. for bmw g42

Was wondering if you could possibly make a 3d printable spoiler like this for corvette? https://ivantampicustoms.com/product/xik-rear-deck-wing-series-ii-the-lower-wing/

Hello, would you make a body kit for a Mercedes W202 DTM? I only have pictures, full size, for 3D printing.

Hola buenas noches, tengo una duda quiero hacerme el aleron extendido de ventanna trasera pero se me dificulta, podria hacerlo ? seria este modelo https://kamstampd-shop.fourthwall.com/en-eur/products/mazda-rx-8-rear-window-visor

hi could you please tell me overal dimension of design i need to double check if it will fit into my 3d printer

Hey, saw you have a few scans of RX8s components. Would you be willing / able to scan the rear + underside for an exhaust design?

Hello, here's some feedback on the Golf 5 headlight scoop file.

There are some problems that need fixing. The fit between the scoop and the hood is completely off; you can fit a finger in there. The attachment to the top of the headlight isn't good either, and the holes for the tabs underneath aren't in the right place. I printed it at 1:1 scale, so here's the result

hello friend I've bought your headlight model
but there is one issue top mounts doesn't fit a little bit could u fix in or I can fix it by myself but I need step file of any side without lens mount thanks

hello. do you have a scan of the front bumper for an e92 m3? the scan taken with the bumper on the car

Hey mate, could i have your mail. I have something to discuss/help i need. Thank you

Hello, E53 front lip is too thick, you remove back and left and right face, and keep only front face.
With keeping only front face it's easily printed in ABS or anything else, and fitted to car :)