54 комментария

Unfortunately I don't have a commercial license available.

The stl file is exactly as it looks in the pictures. I've now put the uncompressed step format there if you think it helps

Can you send the Original to Sb2308@yahoo.com pls? Thankyou!

the step files uploaded here are the original https://cults3d.com/en/3d-model/home/skull-with-lid-and-storage-space

Ich habe schon gekauft
Ich möchte nicht nochmal kaufen
Danke

Wenn Sie es bereits gekauft haben, können Sie es beliebig oft herunterladen, ohne weitere Kosten. Die Dateien im STEP-Format sind jetzt auch dort verfügbar.

Intenta descargar el archivo .3mf de la carpeta o usar la orientación que viene ahí o la orientación automática. Si orientas los objetos correctamente, no es necesario añadir soportes. ¿Qué material estás usando?

Bonjour. De quel produit parlez-vous ? Pourriez-vous me donner un lien vers ce produit ?

They are only available in stl. And I'm trying to find time to convert them from the source file. Which piece would you like to modify?

Thank you for your reply, I would like to enlarge the largest piece of the set to allow for an increased size of the opening because my workbench is very thick.

How thick is your workbench? Please leave me an email address.

Don't bother making the changes; I'll take care of it. If possible, send me everything in STEP or IGS format, or another usable format.

Thanks in advance.

Hello,

I'm contacting you because I still haven't received all the files by email. Have you had time to send them to me?

Thank you in advance, Best regards,

Gaëtan

Hello. Sorry, but I'm trying to find where you sent me your email address and I can't find it.

I sent you the file by email.

I received your email.

Thank you very much, I'll be able to adapt the system to my work table.

Have a great day, sincerely,

Gaëtan

Hello. The printing time also depends on the printer and its settings and speeds. Smaller models print faster :) We also have smaller models but on these the helmet is in a different position.

https://cults3d.com/en/3d-model/home/motorcycle-helmet-holder-mosquito-easy-print-2-bicycle-helmet-holder-helmet

https://cults3d.com/en/3d-model/home/motorcycle-helmet-holder-yamaha-easy-print-helmet-holder-helmet-support-he-3designmaster

I really liked this one, could you configure it in this way, please?

I don't recommend ABS. I've printed a lot with ABS and it's very brittle, breaks faster, prints hard and causes a lot of problems. On Bambu P1S with PETG it takes between 8 and 10 hours maximum with settings to get a solid support. I put two 3Mf files there with different settings.

Thanks for the information. He also added the 60mm version and it is available there for download. Sorry for the confusion. Thanks!

Wow, that was a fast respone.

Thanks for the updated version!

Hello,
The product was not designed for this. I'm sorry but I haven't tested it mounted on the bike and I don't really understand how you attach it to the handlebars

Bonjour,
Merci pour votre réponse, je vais trouver autre chose.
J'ai un fichier pour le fixer au guidon, il est dispnible ci dessous:
https://cults3d.com/en/3d-model/gadget/support-camera-go-pro-sur-velo

The cutout through which the strap enters is 30mm x 5 mm.

Could you make it 18mm instead of 30mm?

yes

I'm sorry for the situation. I checked and all the pieces are there. The archive has been used successfully by 84 clients. Please try downloading again, maybe something was lost during the download. If you still can't, please send me an email at officeideosign@gmail.com and I will send you the missing piece. All the best

Hello. Which support are you interested in? Please send me an email officeideosign@gmail.com
Thank you

Hello. Out of curiosity, I'm asking why it should be at the bottom? I only have what is here: https://cults3d.com/en/design-collections/3DesignMaster/airtag-case-fixing-solutions-for-airtag-airtag-hiding-solutions-for-bicycle-airtag-hiding-solutions-for-bike-airtag-hiding-solutions-for-car

The bottle holder cannot be placed on the middle rod because my battery is in the way. Therefore, I have to attach the bottle holder to the steering rod. However, the screw holes are too high. Ideally, the tracker should be at the bottom of the bottle holder with the screw holes above.

Can you adjust the program so that the tracker is at the bottom of the bottle holder? I already purchased the program with the tracker in the middle.

It is not possible to send a photo this way. Otherwise, I could show you what I mean.

officeideosign@gmail.com

Hello. I'm sorry for this situation. I checked and all the files are there. It's possible that there's a problem with Cults, I don't know. If you leave me an email address I can send you the stl files.

It could be, I have had this issue a few times now.
Patschmidt12@outlook.com

Gracias por su interés. Los modelos SPIRAL, Negative Balls, Mole, Blend están en la misma base.

ahi la compre hermoso diseño lo felicito, alguna recomendacion para la impresion de la lampara? cuantas capas recomienda para el plafon?

Imprimí con la configuración estándar.2 wall loops, 5 top shel layers, infill 15%. Si usas PLA, te recomiendo una bombilla LED que no se caliente. También he impreso con PETG con buenos resultados y tiene un aspecto más brillante.

Hello. There are many fork models. That's why I wrote: Please check if the dimensions of the hole in the fork are 32 mm and if the depth in the drawing is available. From what you wrote, I understand that you should thicken the inside that goes into the fork a little? Call me as much as you can and I'll try to help you.

Thanks, I'll give it a try 👍🏻

Hello. I'm sorry but I don't have that version. With under saddle mounting I only have it for airtag.

I think so. I've had buyers from Russia before. It's a technical problem and I think it depends on the type of card.

Hello.
Measurements must be taken with the underlayment inside.
In principle it can be done but it is a lot of work and testing is needed.
send me the measurements by email and I will try to find time for it.
sebastian.ideosign@gmail.com

Hello
I write to your email,i dont know if you see it?Also i send you a picture.

Yes, I answered there, thank you.

Which product? Do you want a commercial license?

Bitte versuchen Sie es erneut. Möglicherweise liegt ein Problem mit Ihrer Verbindung vor.

Ich freue mich auf Ihr Feedback zur Problemlösung.

Vielen Dank.

Leider funktioniert es nicht, die Datei ist weiterhin 0KB groß. Ich habe es auf verschiedenen Geräten versucht..

Ich habe die Datei überprüft und sie ist in Ordnung. Der Download funktioniert einwandfrei. Bitte versuchen Sie es erneut.

if you really can't download it, leave me an email address so I can send it to you

Es geht leider nicht. Bitte schicken Sie die Datei an acn@mnge.de

Vielen Dank

Bitte nennen Sie mir den Namen des Produkts, das nicht funktioniert.
Vielen Dank

Ich habe das Produkt gefunden und alle Dateien sind vorhanden und in Ordnung. Das Produkt wurde von 75 Personen erfolgreich heruntergeladen. Bitte versuchen Sie es erneut. Möglicherweise lag ein Verbindungsproblem vor.
Ich warte auf Ihre Rückmeldung, ob Sie das Problem gelöst haben.
Vielen Dank.

Hello. Approximately 180 grams at 13-15% infill

Hi. If you tell me what the distance between the holes is on your bike, I can check if the modification can be made.

The distance between the holes may remain the same. However, they should be in a different place (much lower. At 1,5 cm from the bottom). The location of the tracker should also be adjusted as a result.

Hello. Please help me with the name of the product you are telling me about because I can't find what you downloaded. Even though from this description it is not very clear to me what exactly is wanted. I think it is a custom piece with a different shape.

Bicycle bottle holder with hiding place for smarttag | smarttag | smarttag2 | Samsung | BEST SOLUTION FOR BICYCLE ANTITHEFT | BICYCLE ANTITHEFT | HIDDEN BICYCLE TAG | BICYCLE ANTITHEFT

This is the link of my downlaod.
I tried to send you some pictures, but it does not work.
Can I contact you in an other way? Email perhaps?

Hello. Only very small adjustments of a few mm can be made on this model.

For what you say, a custom piece needs to be made almost completely again. In the future I will try to make this version as well but I need to find the time for it.

Hi. If you tell me what the distance between the holes is on your bike, I can check if the modification can be made.

The settings are generally printer/slicer/material dependent. I print PLA at 220 degrees with the print bed at 50 degrees and 60 mm/s speed. The wall mount does not need supports and for the skull you can manually put some supports on the outside in the necessary areas.

Please tell me where the skull supports are needed?

I also put the files (3mf) with supports and settings for Bambu P1S. Now you can download them.

i have creality k1c =(

Look at the last picture in the model presentation and you will see the areas that need supports. Set supports manually only in that area. Good job!

Try loading the 3mf file into your slicer, it might work with some minor modifications.

thank you =)