54 комментария

Hello. Commercial license here:https://thangs.com/designer/3DesignMaster

https://cults3d.com/en/3d-model/home/holder-for-airtag-dog-cat-collar-case-pet-lost-found-tracker-cover-for-air-tag

I'm sorry but I can't cash out crypto.

Привет. Лицензия Cult предназначена только для личного использования.

https://cults3d.com/en/licenses#cults_pu

Buen día. Para el interior es bastante plano. También imprimí con PLA y PET, ambos con muy buenos resultados. Yo imprimí con 2 capas sobre un contorno de sinfil al 15%. Si quieres que quede más rígido puedes poner 3 capas.
Éxito

I'm sorry about this. I've updated the file and it's now downloadable. If you can't download it, please leave me an email address and I'll send the file there.
Thank you

Bonjour, j'ai imprimé du Pla et du Pla+ avec 2 murs et 15% de remplissage et c'est assez solide. Si vous souhaitez encore plus de rigidité, vous pouvez mettre 3 murs. J'ai aussi essayé avec du PET mais ce n'est pas ok car c'est cassant.

Top merci pour la réponse rapide je lance l impression dans la soirée alors :)

Hello. Unfortunately, I cannot identify the model by number. Can you help me with a link? A commercial license option for many products exists here https://thangs.com/designer/3DesignMaster

I'm sorry, but your request does not fall within the return policy.

I can only check tomorrow. if not 2cm I can make the modification for you

I checked and it also fits a 2.5 cm wide necklace.

Please write me the name of the product you are referring to because I did not understand it. Thank you

Hey I'm sorry for this. Tomorrow evening when I get home I will upload the song. Thank you

Thanks, but overall, it is amazing and really good design!

Thank you for your patience. I uploaded the missing part. I don't know how I missed it, it's an important part of the product design :) Again, sorry about that. I'm curious how it looks and I would appreciate a picture uploaded to make.
Thank you very much

i wil take a photo and post it, also one more suggestion, can you maybe designe or add one more these sliders that holds the skis that are a bit higher, rn they are 6mm, can you designe one that is 10mm?

Of course I will. This was my intention for making those removable parts. It depends a lot on the ski design.

Claw3 10mm is now available for download. The piece is the same left and right

hey, can you maybe do one more that is a bit higher like 2mm, an one more 4 mm higher, thanks

bj 2024

Does it touch the Smarttag or the case? Unfortunately, with this design I have no way to shorten by 2 cm

Es berüht das Gehäuse , habe schon mit der feile etwas beabeitet aber es brachte kaum was.wenn ich mehr weg nehme berüht der smarttag die gabel.Das ganze müsste tiefer.Schade fand die idee sehr gut fox ist auch weit verbreitet daher dachte ich es passt.

Das tat mir leid. Ich werde versuchen, es auf einem Fox 36 zu testen und eine Lösung zu finden, aber das wird einige Zeit dauern

s tut mir leid und ich habe Ihnen Ihr Geld zurückerstattet. Ich werde versuchen, eine Lösung zu finden, aber das wird einige Zeit dauern

vielen Dank sehr nett von ihnen.

ch war gestern in einem Fahrradgeschäft und habe eine Fox 36-Gabel anprobiert. Mein Adapter passte dort überhaupt nicht, weil der Durchmesser des Lochs kleiner als 32 mm ist, obwohl es konisch ist. Wahrscheinlich 30 mm oder weniger am Eingang. Wenn Sie den Durchmesser der Gabelschiene messen können, fällt mir möglicherweise eine Lösung ein.
Danke

Lo siento por eso. Parece que el archivo no se copió correctamente. Recargué el archivo y ahora debería poder descargarse correctamente.
Por favor dime si lo logras.

I don't understand. You can download it from there

Hello, Thank you. no support is needed for the wall mount. It sits with the right side next to the hook on the printing bed. I'm trying to attach a picture

I put an image with an orientation recommendation on the product page.

Hello. At the moment I do not have this option available, but I am thinking about the license option for production and I will come back as soon as possible with an answer.

Hi. I checked and after the update you can also download a small version. If you still don't succeed, send me an email and I'll send you the file

I'm sorry, but for now I have started several projects that consume all my time.

PLA

Pentru folosire en extérieur recommandé PET

Niveau résistance c’est bon? Quel sont les paramètres d’impression ? (Vitesse,remplissage)

pour un usage intérieur si le soleil ne l'atteint pas, il est résistant et en PLA. J'ai utilisé 15 % de remplissage et une vitesse de 80 mm/s

Bem-vindo. Peço desculpas pelo inconveniente. Enviarei para você em 10 dias. Infelizmente, estou fora do país há 2 semanas e não estou com meu laptop comigo. resolver

se você não ficar satisfeito, posso devolver seu dinheiro, ou se quiser esperar, enviarei o pacote completo em 10 dias. como você deseja

Hello. I'm glad if I can help you. If you go to the product In the last picture I took a picture of the printing bed. There you can see exactly the best placement. The support, the base does not need supports for printing. The small top piston sits with the thread up and does not need printing supports. The lower part of the piston (the one with the grip sits with the thread down and it is recommended to put some printing supports on the inside.

To attach the support piston, I recommend using an adhesive for plastic. for example Bison plastic. It can also be done with a screw, but it is not the case.

the joint is conical and after pressing the bonding is strong. I didn't manage to open it.
Success