Burgrave Exterminators (Pre-Supported)

This multi-part kit includes the supported files to print a full unit of Burgrave Exterminators, an elite heavy infantry unit of the Weeping Crusade range:
- 3x leg poses. These are also available without the flowing parchments but only unsupported, since the chains end up being too fragile without them. There is also a version without chains altogether in the unsupported files.
- 9x torso variants. There are 3 different helmet designs and each is available in 3 poses (to either mix and match or print the whole unit with the same helmet).
- 2x pauldron designs, with gems or with spikes.
- 2x right arms with polearms.
- 2x left arms with wrist-mounted grenade launchers.
- 1x polearm held with both hands with a wrist-mounted grenade launcher.
- 2x halberd polearm heads (one with the revolver cylinder open and the other with it closed).
- 2x spear polearm heads (one with the revolver cylinder open and the other with it closed).
- 1x right arm with a blood eagle vexilla.

The kit is quite compatible with others from the Weeping Crusade range, sharing the same arm, pauldron and hips slot sizes. It has the same legs and torsos as the previous millennium Palsgrave Exterminators, but mirrored, and you can check their store page for scale comparisons with other relevant bits. Furthermore, the shoulder joints include slots for 3x2mm magnets.

The models have been designed with either 40mm or 50mm bases in mind, available for free in my profile. The renders and pictures show the Archaic Stone 40mm bases.

They are intended for tabletop wargames, to be used as a proxy for something else or simply as a collectible for miniatures and modelling hobbyists.

PD: I've gotten a lot of comments in my socials about this unit giving EC vibes. I find that absolutely perfect (extremes do meet after all) and would love to see these guys painted in pink, gold and purple, so feel free to use them for whatever faction you like!

Both pre-supported and unsupported .stl files included for each piece, as well as .ags files so you can manipulate the supports using Runebrace.

I printed mine in Anycubic's beige Water-washable ABS-like V3 resin on an Elegoo Saturn 3 printer with 0.025mm layer height, 2.25 exposure time, 3>5 lift distance, 65>100 lift speed, 180>65 retract speed and 1.2 wait before print. There were 8 burn in layers with 30 exposure time and 8 transition layers. However, these values can change significantly between printers and resins, so trust your own experience.

I test printed all the bits available to make sure the pre-supported files worked.