Зарядка охотника (предварительно поддерживается)

Hunter configuration for designed for the Seraph War-Coffin (https://cults3d.com/en/3d-model/game/seraph-war-coffin-pre-supported) but it should be compatible with other similar models. You can check the link for more images, both digital renders and pictures of the physical print.

The kit includes two Solar Spear poses and four different ones for the claws, as well as three different wrist guns: standard, flamethrower and destructor; with two ammo options for them.

Whenever parts are labelled with letters after their name (eg. AmmoA_BulletsL and AmmoB_CablesL) it will mean they're interchangeable with each other and you only need to print one of them. However, when a part ends in L or R it'll mean they are intended for the left or right side of the model respectively and you will need both. To make things easier, an image with instructions is included in the files to help you through the assembly process.

There also is a slot above the elbow to fit a 5x2mm magnet so the arm can be kept interchangeable and easier to transport.

Both pre-supported .stl files and unsupported .obj files included for each piece, as well as a Lychee scene with all of them. I've included already mirrored parts in the pre-supported files, but for the unsupported ones you'll need to mirror all the pieces which name ends in "R" (they are the right one and you'll need a left one too).

I printed mine in Anycubic's gray ABS-like V2 resin (water-wash) on a Elegoo Saturn 3 printer with 0.04mm layer height, 2.4 exposure time, 6>7 lift distance, 45>100 lift speed, 180>65 retract speed and 0,5 wait after lift. There were 5 burn in layers with 25 exposure time and 7 transition layers. However, these values can change significantly between printers and resins, so trust your own experience.

I recommend being somewhat careful when removing the claw pieces since the fingers are quite fiddly, specially those not in contact with others (so the thumbs and the ones in the "blender" option).