Bloques de dinosaurios

Cute Dinosaurs! Print as Separate Blocks, Tiles, or as a Kit Card.

Easy to print Brontosaurus, Triceratops, Stegosaurus, and Tyrannosaurus Rex are so fun to play with! Create a scene, march them along together, or see how high they stack onto each other.

Designed to print well with filament swaps, these also looks great printed with one color. See notes below for filament swap heights.

Pro Tip: Reflect/Mirror the STL files in your slicer along the x- or y-axis to create more variety.

The “Dinosaur Blocks Kit Card” is also included. It prints as a single piece with no supports. The model then breaks apart for seven fun dinosaur toys. (Three of the dinosaurs in the kit card are reflected already.)

BONUS: "Thin" versions of each dinosaur are also included for additional options or decor.

Find more fun models in my Kids & Toys Collection.

Check out my Dinosaur Wall Art based on the same designs!

Each dinosaur block is 16.5 mm in the z-direction when laying flat. The “Dinosaur Blocks Kit Card” is 176 x 176 x 16.5 mm. I printed with 0.2 mm layer height, 3 perimeters, 4 top and bottom layers, and 15% rectilinear infill.

The dinosaurs on top are 1.5 mm thick and the indented outline on the bottom is 1.5 mm deep. To print with a colored outline on the bottom, set a swap at 1.5 mm for a few layers or continue the new color to 13.5 mm for a thick, symmetric band of color. For coloring the dinosaur on top, set a swap at 15 mm. Of course “painting” the models in your slicer is an option too for multi-material setups.

No supports. No raft.

Toy Drive Design

This was originally designed for the kit card-themed 2025 LM Show Christmas Print Drive. If you are printing contributions for the toy drive, it must be ONLY the kit card (which is available on Printables). Print using the standardized Print Drive Printing Guidelines linked there, and be sure to remove the kit card from a cool build plate to preserve the sprue attachments. Prints for the Print Drive must be in one piece when shipped.

Credit: Thanks to 3DPrinterDoctor and D3D_Cookie for sharing the sprue design for the Print Drive kit cards.

Not for commercial use. No derivatives. See © link.