STORAGE COW FOR SD AND MICROSD CARDS. 12 SD / 8 MICROSD OR 4 SD / 40 MICROSD

Are you ready to become a goldsmith? Pushing the boundaries of what's possible with a desktop 3D printer ?

Here is a little cow that fits in the hand (5.1 cm) and which can store 12 SD cards and 8 MicroSD cards. When you open it, you can see all your cards at a glance, and you can insert and remove them without any effort and without any click. Your cards are perfectly maintained and do not risk being damaged during handling.

IMPORTANT: The files you buy are sold under Copyright. This means that they cannot be sold or distributed for free. Additionally, you may not sell prints made from these files. If you did, you would jeopardize the creation of new designs. Thank you for your understanding.
YOU CAN HOWEVER SELL YOUR PRINTS OF MY DESIGNS by subscribing to the "3D print seller" subscription: https://www.patreon.com/LabLabStudio
ALL MY DESIGNS ARE INCLUDED IN THIS SUBSCRIPTION

If you just want to print a cube ready to use for your SD cards, it’s here :
https://cults3d.com/en/3d-model/fashion/cube-de-rangement-pour-cartes-sd-et-microsd

If you are an advanced user or if you want to become one, together we will build a beautiful object that you can be proud of. Don't worry, I'll walk you through the documentation that comes with the print files, and a video tutorial : https://youtu.be/ibx6_If7Ffw

Documentation is in English and French.

Please post your makes. I would like very much to see your work.

Layer height: 0.2 mm (it is certainly possible to make thinner)
DON'T TRY WITH RESIN, IT WON'T WORK.

10 - First Link*.stl come with included supports. Don’t forget to remove them before assembly.
For the temperatures and printing speeds, you can use the parameters that you master, depending on your printer and your filament.
This object is articulated and requires a high level of precision. Adherence to the build plate is therefore essential. The slightest deformation due to warping would compromise the correct opening and closing of the box. I advise you to use glue or lacquer to improve the adherence.

Finally, for easier assembly, the bed must be leveled perfectly. The documentation tells you how to do this.